The macros I have written are used to help me format raw data reports into something more visually pleasing. When I start out with the finalrow code, it works great, but as the macro runs, it inserts rows and deletes rows, constantly changing my FinalRow.
SO..when I have "Do until activecell.value FinalRow" or something similar, it always either stops before the true finalrow, or in some cases keeps running past the true finalrow.
Is there a way to make it recognize the finalrow at any given time in my macro? For now the only way I could think to fix it was to just have my first macro add "End" to the row below the finalrow, and all my code just calls to look for "End" to stop.
In Exel, how can I record the highest value (automatically) from a row of numbers that changes each day. At the end of the year I still need to have the highest number recorded over the whole year even though each previous day's numbers disappear.
when i try to get the final row witht the following:
KROGrow = Cells(65536, 1).End(xlUp).Row
i am getting a row that is consistently 27 rows off of when i manually do control up? i am pasting data from and existing workbook into a newly created workbook in the sub. i would assume that since the destination is new that they would never be any data in this?
i'm trying to run a macro I recorded then amended to define a final row, but when I step in to the macro it says Compile Error - variable not defined. Please can someone help, surely I am defining it so I don't know why it doesn't work? Is there anything wrong with my FinalRow line in this macro?
Sub Macro1() ' ' Macro1 Macro ' Macro recorded 21/06/2009 by Richard Shaffer ' ' Sheets("Core Finance").Select FinalRow = Cells(65536, 1).End(xlUp).Row Range("A3:O" & FinalRow).Copy Sheets("Sheet1").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _ SkipBlanks:=False, Transpose:=False Range("A1").Select End Sub
Code: Sub StaffDateFiller() TodayDate = Worksheets("Program").Range("I8") StaffName = Worksheets("Program").Range("I9")
[Code]....
Is there a way to either:
A) make this run constantly (as it stands now, the code works as I want it to, but I have to run the code for the operation to take place)
B) perhaps write it somehow using indirect reference (I am not sure how to do this), so that I do not have to constantly have the code look through a bunch of rows.
I simply want to check if an 8-digit value occurs in column 7, and take information from somewhere else and paste it into column 8 and column 9 of the same row.
With Application.FileSearch .LookIn = "K:Departmental FoldersAccountingMonthly Accounting Package20074_2007Green BookHighlights" .Filename = "110 Summary Income Statement-Month, YTD" If .Execute > 0 Then Workbooks("Greenbook_Schedule_Preparers").Activate Dim rFoundCell As Range Set rFoundCell = Columns(1). Find(What:="110", After:=Cells(1, 1), _ LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False) rFoundCell.Interior.ColorIndex = 35 End If End With
End Sub
to highlight cells if a file is found in the system.
These files are saved by other users and I would like this macro to be "running in the background" while I have the file open so if someone saves a file it will automatically update. I don't want to start the macro every time I want to know if a file is saved. Can this be done?
At the moment I have 2 columns, A1:A5 and B1:B5. Normally A1:A5 and B1:B5 are all 0's. Every 5 minutes numbers will show up in column B and I do a procedure outside excel(feedback of DDE's) and they all go back to 0. Now sometimes the cells in A1:A5 are not all 0 after the numbers show up in B1:B5. I can reset A1:A5 to 0 with a macro button. I already built that macro, lets call that macro 'Mike'. So now I have to press that macro button every time when B1:B5 are showing zero's after the procedure and A1:A5 are not showing 0's. Is there a way a macro can constantly check if A1:A5 is non zero and B1:B5 is zero that the macro Mike is called?
I am trying to copy a range of cells, based on a set of criteria that changes constantly.
In Column A, I have numerical values that are present every 10th cell. In columns B through D, I have various text data that corresponds to the number in Column A. So for example, in A50, I have the number 46975. In the range B50-D59, I have text data that goes with the number in A50.
Each day I run a few calculations and based on the number I get, I want to find the exact match in column A, then copy all the data in columns B through D that are related. So if my calculations result in 46975, I want to automatically copy over to another worksheet the range B50-D59.
I don't think there is such a function but is there a way that I can have a function that constantly adds the numbers in a column and when the sum of 240 is reached it adds 30. I need it to do this only once and not keep adding at every 240 point.
to enter date/time on a sheet that is used to create a printed form. I want to ensure that the date/time are current when the form is printed, but they will actually only reflect when the workbook was opened. So, if the employee opens the workbook, then takes a break or answers the phone, when he prints the sheet the date/time may be wrong.
I need to have the worksheet either:
1. actively update the date/time information constantly 2. update it before printing, 3. or possibly have the workbook "time out" and close if there is no activity for 60 seconds or so.
I already have code entered to prevent a "do you want to save changes" promt when closing. And I am using a command button for print which closes the workbook automatically once the employee prints the form (to ensure that all other data is entered fresh everytime the workbook is used).
I have created a spreadsheet which uses data validation to allow a user to select a company, start Date, end date, and projected months in order to output different figures. I have attached a spreadsheet to this post in case that was hard to understand.
Since there is data validation, indexing, and matching going on, as different selections are made, various tables change as a result. What I mean as you open the example sheet and start messing around with the data validation boxes.
The problem I am encountering now, is creating a chart that will also keep changing as the user changes their selections in the data validation boxes. I am unsure if this is even possible, but I figured it was worth a shot to ask. On the example sheet, I have included a graph similar to the one I want, but it only contains data in a certain range of cells, rather than dynamically changing to accommodate whatever data is outputted.
Here is what I am looking for in the graph:
1. Whatever dates are selected by the user in the data validation boxes, along with the projected dates will be on the x-axis.
2. The PMPM figures associated with the selected dates, and the projected dates on the y-axis.
3. Ability to make different selections from the data validation boxes and still have a dynamic chart that keeps updating itself.
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
Moving between different sheets changes the procedure window, which is a good thing, but can also can be error prone and annoying to search through several windows searching for the procedure or module currently working on. Is there a setting somewhere to prevent VBE from changing the current procedure window?
i have a spread sheet that has data based off other data based off other data in a continuous cycle.. i know how to hide the #DIV/0 using VBA but what i want to do is change it to another name..such as N/A untill the data is being entered.
I have imported data, in text format, that has just the month and year (02/09). I need to convert that to month, day and year(02/01/09). The day of the month isn't relevant, it can always be the first.
I currently have 2 columns of data. One is a column of numbers, and the other is just commas to separate these values. How do I convert this into one row of data?
for example, I currently have:
row 1 | row2 324132 |, 324929 |, 010101 |,
How do i change it to
324132, 324929, 010101,
I will be able to use notepad/any other windows program
I have a simple spreadsheet for keeping track of gas mileage which I have been using for over two years with no problems. I have five columns A through E and right now I'm on row 72, that's where the problem started. When I enter the starting mileage in A and tab to B it changes the mileage number to a date and as my mileage number I type in changes the date also changes as I tab to B. See the sample below.
A B C D E 15357155968.491 28.14745024239 9/12/19420:00 10.44423.36269628244
The part that puzzles me is it does it in row 72, 73, 74, 75, and 76 then it goes back to working normal, and even though it puts the date in A and zeros in B it does the math right. I looked at column A and B for those rows and there isn't any formulas in them.
I Have a formula in column D =(B72-A72)/C72 and column E is just =B72-A72. Other then that the only other formulas I have is in column B row 177 it gives me total miles, in 178 it gives me total gallons, and in 179 it gives me average MPG.
I am looking for a way to change the fill color of a row to just a portion of a row based on a on cell in the value on on cell in the row. I understand it should have something to do with ifthen but not realy sure of the exact phrases.
I am running a macro to copy the formats of one sheet to the next sheet. One of the formats that I need to copy is the tab color. I have the macro recorders code but it is for a specific sheet
I have modified the Run as Regular Macro code from this site to only changing the x axis, select different cells and I also only used object 1 instead of the name of the chart.
The problem is that when it is run which ever value is changed last, minimum or maximum, it will turn on auto and mess it all up.
When opening 1 of my files (made to be used by others) a lot of .tmp and .emf files are made. When I close the file most, but not all, are deleted and new ones are added. Simply deleting all .tmp/.emf files doesn't work because some are still in use (by other files).
There for I have made a bit of code that checks if direcory "C:...Temp|Temp_PandL" exists. If not, then it will be created:
I was working on a workbook that unhides certain sheets depending on who's logged in. It seems to work fine. However, after it's run (and sheet2 has been unhidden), when I go to unprotect the workbook, the password ("test") no longer works.