i tried using the lookup but it gave a different result. i want to search a value from sheet1 A to sheet2 A and copy the remarks from sheet2 B and paste it to sheet 1 B and if not found leave it blank.
here's the attach file i just trim it down.
A B C D E F
Latest Status
Latest Date
Current Status 1
Current Date 1
Current Status 2
Current Date 2
#VALUE!
Sun,16-Feb-14,11:0 PM
Take1
Sun,16-Feb- 14,10:41PM
Take2
Sun,16-Feb- 14,11:02 PM
My formula =IF(B3="","",OFFSET(A3,MATCH(B3,B3:F3,0),0,2)) in A2 is giving me #value error.
The correct solution should be Take2, while matching the condition from B2 latest date.
Sheet Attached. File Name-Latest.xls Zippyshare.com - Latest.xls
- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
table1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
on sheet 1
I have a list of race car numbers (20K, 15W, 2) in A1:A50 (may be more or less than 50)
Next to them in B1:B50 are the point values they earned for a night of racing. 100-97-94 etc.... these are points they have earned for a night of racing that week.
in C1 I have how many column over I need to write to (ex. 4 for Column "D" on sheet 2)
On sheet 2 I have all the total for each week.
example
A1 B1 C1
Car 4/22 4/29
20K 94 90
15W 97 100
......
What I need is some code to go down the driver list on sheet1 and write their points in colum D on sheet 2 when it finds the appropriate car number. If the car number does not exist then add the car to the bottom of the list (A50) or whatever, and write the points 4 columns over.
Trying to grasp the concept of using these 3 functions to search for and return values from a data sheet.
The attached spread sheet has performance data for a group of employees.
What I need to do is find a particular employee then return a value for one of the category's.
For instance, I need to find "10TE03 ANGIE HOLLIS" Parts Usage on color or cell C10 in the attached sample.
Sometimes new category's are added to column A adding to the number of rows so a simple offset is not reliable.
Once I get that working, I then need to use a named range to total and average different data points for groups of employees by teams.
Maybe Offset-Index-Match is not even the way to go here?
On Sheet2 I have a table where I want M2 to do the following:
1.) Look at cell A2 where the name "John" is and B2 where the name "smith" is.
2.) Look at sheet1 and look in B2 and C2 for "John" and "smith"
3.) Once it matches the name, place the contents of sheet1, cell I2 into sheet2, cell M2.
So in short, match the name on sheet2 to the name on sheet1 and return the number in I2 to M2 on sheet2.
Maybe combining the persons name in to one column would make it easier?
I would like to be able to find all cells in row 2 that are "greater than 0". Then I would like to return the coresponding job number in row 4. I need to create a list of each job with the number of hous spent on that job next to it. I may have 30 different jobs but only 5 jobs that have hours for the specific week.
How I attemted to solve this is to create a table that listed all the hours from the largest number in row 2 to the smallest. Then I found the job number corresponding to that number of hours. The problem with this meathod is that if two jobs have the same amount of hours then the first job number is returned for both values that are the same. See attached example.
How can I modify the following formula to find the contents of reference cell, for example if the cell reference (G$3) is equal to 9 I want it to use 8 instead.
Code:
IF(ISERROR(INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0))),"",
INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0)))
I tried using G$3-1 but this doesn't appear to work.
I'm writing a macro that will import data from one workbook to another, based on yesterdays date. I have the import functionality working, and I've been playing all afternoon, but I can't find a way to find yesterdays date in a range and use that row number as the row offset value in this line:
Rather than having a set row offset value (in this case, 14) I would like to use the find function to lookup yesterdays date in range "B50:B80" in the worksheet I've designated as "sh1" and return the row number of the cell that has yesterdays date and use this value as the row offset value, replacing the hard coded 14 that is in there currently. The date values in the range are formatted as per Date Format.jpg.
I have created some code to look in a cell to see if the name matches that which has been input in a drop down list on a combo box on an input form and then copy the value of column 10 in the same row. I created a public variable for that name as txtTenant.
What I wanted to do was to then write the code that if the first cell did not match the name selected (txtTenant) that it would then drop down one cell and compare it and keep going down until it finds a match, right down to the end of the column of data if necessary.
My coding is not working - it stays at the first person it finds in the first cell. I am not sure if I should be using For...next loops or loop.....
This is the
Sub FillData()
Application. ScreenUpdating = False
RentRow = 2 'sets the first row as row 2 in the data sheet to copy from
NewRentRow = 7 'seta the row to copy to in txtTenant
[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
I have a list of names in col A and a list of numbers in col B
How can I write a formula that finds the minimum value and returns the name next to it?
I was trying something like Offset(min(b2:b20),-1), but it doesn't work.
I am attempting to do is have a macro (Via Command button) go through column A to find the word "TOTAL". Once that is found I want it to offset by 3 rows (from the word "TOTAL") to grab the number and place it into column B.
View 2 Replies View RelatedI'm writing some code where I need to know the column in which a specifc text string occurs. Because of the nature of the sheet, the string will only appear in one column, but that could be in almost any column on the worksheet.
For example say the text string is "Year 1", I need to find the column with this string, and then offset down to a predetermined row, or offset over to the appropriate column (something like below).
With Selection
.Offset(0, x).Select
If List.Selected(0) = True Then
y = i - 1
With Selection
.Value = Salary * Inflation1 ^ y
End With
Else
I need to combine rows that have the same value in column a and column b to the same row by offsetting column c to the next available column. For example, I would like the first 6 rows of the provided sample to appear like this.
0014B22<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities
0014B23<@28>Coursey<@28>Ogles<@28>Shelocta
Sometimes the values are the same in column c, sometimes they are different. I do not want to delete duplicate rows where they are the same. Sometimes there are 2 rows that have the same values in column a and column b, other times there may be 3 or even 4 rows with the same values in column a and column b. Regardless, I would like the values in column c combined on the same row in the next available column. It would be nice if the duplicate column a and column b rows (with a null column c cell) were then removed, but I could do that in the next step.
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B23<@28>Coursey
0014B23<@28>Ogles
0014B23<@28>Shelocta
0014B24<@33><i>Available water capacity:<p> High (about 11.5 inches)
0014B24<@33><i>Available water capacity:<p> Very low (about 2.9 inches)
0014B24<@33><i>Available water capacity:<p> High (about 9.0 inches)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> High (about 1.98 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches..............
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I am in the process of writing a VBA code(I should I am fairly new to this code writing!!!).What I need to be able to do is below.(enclosed please find a output in an xls file) What I should be able to do is below:
1.Find the text "Cash(No Listing)(Monthly)"
2. Offset to the 13th Column after that
3.Select the value in this column ,copy the value
4.Go to a row above and move one column to the left i.e.offset (-1,-1) and move 12 column backwards i.e.offset(0,-12)
5.Copy the value in 3 above to this entire range
6.Repeat this process for the entire file
My code is as below.Let me know where am I making a mistake. Just to let you know that this code performs the job well for the first entry i.e in the yellow makde area and doesn't do the job for any further entries .Llooks like I have some problem with the loop but not sure as to whats happening!
I have been unable to get this code quite right.
I want to be able to search all of column A for the string "UNAUTH O/D FEE £20.00" and when it is found, add £20 to column B, and 01/01/00 into column D of the same row.
Sub feedate()
Set rd = Sheets("fees")
z = 20
x = 1 / 1 / 6
For i = 1 To rd. Range("A65536").End(xlUp).Row
If UCase(Cells(i, 1)) = "UNAUTH O/D FEE £20.00" Then
Cells(i, 2).Value = z
Cells(i, 3).Value = x
End If
Next i
End Sub
Working on an export from an e-commerce application that lists the item purchased, unfortunately not by item #, but rather a lengthy description. I'm trying to construct an item number based on that description which contains several constants.
Each item ordered appears in a single row, comprised of ORDERID, QTY, PRODUCT DESCRIPTION
I have several tables to pick out PRODUCT TYPE, COLOR, SIZE, etc. I need a formula to search to see which of the unique values appears in each in the cell and return the shortcut of that value.
PRODUCT DESCRIPTION example "Sweater - Blue - Large - Wool"
TYPE TABLE:
Sweater SWTR
T-Shirt TSHT
Jeans JEANS
COLOR TABLE:
Blue BL
Green GN
Purple PL
Black BK
I would have separate tables for each part of the description.
The formula I'm seeking would search the PRODUCT DESCRIPTION cell for the range of values for each 'part'. So it would search to see which of Sweater, T-Shirt, or Jeans was in the cell and then return the one that was - SWTR in this example. I would modify this formula for each 'part', in its own cell, and then use an =cell#&"-"&cell#&etc... to combine these returned values.
I know I can write a large if- chain using ISERROR & FIND, though some of these lists will get lengthy.
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
I has number sheets with thousands rows of unsort data. I need to find the price, with optional name and date if given, to return the rows values.
Example from Summary sheet, to find the price range and return 3 rows (even there are four set of answers, highlighted in light blue), with sorting the highest price first.
Summary Sheet
Sheet name
S01
S02
S03
S04
S05
S06
S07
Product
1
2
3
4
5
6
7
Search Fields
[Code] ........
I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies View RelatedI'm working on a project in which I have 50 states + DC listed by 2-letter abbreviation, and want to return a value in another column that will be a non-unique number (some will duplicate in the second column.)
Also need to do this same operation with first column (state) and third column, which also is comprised of non-unique numbers.
Hlookup, lookup & pivot tables seem to not be a fit for this.
I have two excel files.
File #1 is a varying length and has 4 columns with ID #s in Column A.
File #2 is a two column file that contains a list of ID #s in column A AND modified ID#s in column B.
I need to match the ID #s in column A from file# 1 to the list in column A of file#2 then replace ALL instances of the matching ID #s in column A of file#1, with the values found in column B of file #2.
I've tried using the substitute function but I could only replace one found ID at a time.
I am trying to return the column name to the user based on a cell value. I am using the formula =Match(C2,1:1,0). This returns a numeric value of the column based on the match. What I want to get back is "AL". Do I need to use some format calculation to achieve this?
View 5 Replies View RelatedI want to write a macro that match multiple column and return a value as I show in the table below
Plant
SLOC
Grade
Posting Date
1
555
abc
[Code] .....
I have to check multiple column from 2sources and get the Posting Date from Table2 to Table1. I'm quite confused about the function which I should use like match, lookup, index, etc.
I have used index/match before to match and extract data, but I can't seem to wrap my head around this one. It's probably best explained by looking at the attached workbook. Basically, I want formulas in 'John Doe!B' and 'Jane Doe!B' to look up the Name and Date values in column A on the 'Data' sheet, and then return the time value that is on the same row but in the 'Data!B' column.
I then want 'John Doe!C' and 'Jane Doe!C' to return the time that is two rows below the time shown in 'John Doe!B' - I've gone and manually entered and bolded the values in the workbook to show what I eventually want the formula to do. The data on the 'Data' tab will be extracted monthly into excel from tracking software my company uses, but there will always be a minimum of 3 rows of time for each date. As you can see in the example workbook, some dates will be omitted for some people, and while there will always be 3 minimum rows there will often be many more time entry rows for different dates as well. However, I'm only concerned with the 1st row and 3rd row for each date.
I was originally thinking a vlookup for 'John Doe!B' and then a hlookup for 'John Doe!C' that references the value in B might work, but I'm getting stuck on how to ensure the formula realizes the differences between the data and dates for John Doe and Jane Doe.
I have data in 1 column that I want to match data in the second column. If it matches a value in the second column I would like it to return the value from a row in the third column.
View 9 Replies View Related