I need to write a macro for find a value in all sheets in current workbook. The problem is put like this: I have to write a ID (for DVD archiving) in a column but testing that generated value is unique in entire workbook (I have multiple sheets, organized by movie genre). I can use find method and testing for value <> Nothing but it always said that the value is present (the current cell value); there is any method to omit selected cell value? I think "After:=" parameter can do this but I don't figure out how to handle with it...
I have a pivot table to show the number of complaints by site and by type of complaint. This is not providing the correct information as each complaint can have can have multiples line attached to it. I only want to count the complaint once. For Example, There are 13 site locations, and several different types of complaint.
I have conditionally formatted a column of staff names where duplicates are highlighted - this is fine but there are some duplicates that I do not want to include - these all have the same criteria in that they include the suffix (v)
I have this formula below it will return multiple results is it possilbe to modified it that it will return multiple results but ignore duplicates. I would like it to be a stand alone formula no helper cells or helper columns.
I need to add items to a combobox without adding duplicates or empty data. I am able to add without empty data but how to ignore the duplicates.
Here is what I have...
Code: Dim GL As Range Dim ws1 As Worksheet Set ws1 = Worksheets("Main") For Each GL In ws1.Range("MainGL") If IsEmpty(GL) Then 'do nothing Else ComboBox2.AddItem GL.Value End If Next GL
I posted a thread a while ago asking for a formula to rank based on multiple criteria (Rank On Multiple Criteria). The following; = SUMPRODUCT(--($A$2:$A$50=$A2),--($B$2:$B$50=$B2),--($D$2:$D$50=$D2),--($G2>$G$2:$G$50))+1)
works an absoulte treat, however is there a way to modify it so that does not allow duplicates? The data in the G column refers to time values acheived during testing of athletes, the problem arises when two athletes achieve the same score and thus they are ranked the same. However, body mass is also measured (F column) and in essence the athlete with the lower body mass has achived the better score and thus should be ranked accordingly.
I am having 2 problems with dynamic named ranges. On one hand, I am getting a LOT of duplicates in some ranges and a lack of entries in those ranges that have too many blanks. Here is a sample of the dynamic named range in the first column:
This first range is called "NamedRange_1" =OFFSET(Data!$A$2,0,0, COUNTA(Data!$A:$A)-1,1)
how to eliminate both the duplicates and the blanks?
I have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null.
I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it.
I've attached the spreadsheet so you get a better idea of the problem that i encountered.
I would like to be able to Click a Cell or Button to enable me to go from the 'VIN ENTRY' worksheet to the 'Date Completed' worksheet and then be able to enter the Date in the Correct cell cooresponding to the last 6 digits of the VIN. I have included the File
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04 Date3/06/063/06/06n1/06/06 Tanker8248824617606 WhoJ AshJ AshEmptyHarry Date Tanker Who
Private Sub DueCommandButton_Click() Dim strRecordID As Range Dim rngData As Range Dim Vents2 As Range, Tanker_Result As Range Dim wsheet1 As Worksheet, wsheet2 As Worksheet Dim Column_Name As Range Dim ActiveCell As Range Set wsheet1 = Worksheets("Sheet1") Set wsheet2 = Worksheets("Sheet2")....................
What I am trying to achieve is to copy the contents of the active cell in the first sheet and find it within another sheet but I am unable to get the What:= section of the code to take the value of the copied cell.
I have a list of names in coloum D of a worksheet called "Trial", I have another worksheets called "Usage" with this list. I need a macro which can search the name written in Trial worksheet in Usage and worksheet, and activate the found results in usage worksheet.
I cannot use vlookup formulae here as "trial" sheet only has last names, which "usage" sheet has full names.
Need to find the first cell above the active cell containing any sort of variable (integer, string value, cell fill colour, named range, etc...).
For example, a column contains multiple integer values between 1 and 10. I would like the macro to "locate" a specified value, say 3. Ideally the macro will select the first cell matching this criteria, located above the active cell. Once located, the resulting cell will be added to a range to be copy-pasted to a new worksheet.
I am planning to use this code for various applications in a workbook I am creating. At present the code will be used to locate string values, and cell fill colours. It is also likely this will extend to other types of variables in the future.
I've found information relating to the find function, but nothing specifically to find the first result above the active cell.
column A = weeks (A2:A50) i.e. P1W1, P1W2, P1W3....P12W4 etc column B = headcount (B2:B50) i.e. 5, 7, 5...10 etc
Essentially my criteria is "looking for last week and give me headcount" i.e. my lookup criteria is P7W5 ....however if P7W5 has no data, i want the lookup to go up or offset to the row above (it may be one to 4 rows above)....
I have a workbook with 2 worksheets, A and B. Sheet A contains source data and sheet B a pivot table of this data. I want my user to click on a cell within the pivot table,click a button that runs a macro to find the instance of this value within Sheet A. I did record a macro but it did not work.
I want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
I want a VBA that searches for duplicates, triplicates, or more and combine the cellvalue that is next to the duplicates. Also, if it combines them, it should only use the last letter. I have a code that works partially, but I'm stuck.
For example, I have this list:
1 2014A
2 2014B
3 2014C
1 2014D
4 2014E
1 2014F
I want it to combine the A, D and F like this:
1 2014A
1 A/D/F
2 2014B
[Code] .......
I created the following script, but i can't get it to use the last letter. Also it creates a " / / " when the cells are empty.
So I have the macro written, but I don't get the complete data that I am looking for. This is what I am trying to achieve
Here is an example of what I am trying to achieve. This is in the first sheet: Column A Column B Car Saw Dew Jacket Pen Key Saw Screen Hand Shoe Jacket Window Screen Sock Screen Mouse
Now I want this in the next sheet: Column A Column B Column C Column D Car Saw Screen Sock Car Saw Screen Mouse Dew Jacket Window Pen Key Saw Screen Sock Hand Shoe Jacket Window Screen Sock Screen Mouse
In my current macro, It displays most of what I am looking for, but not a duplicate ID if there is one. For example Screen, there are 2 IDs. My macro is only getting the first one and then skipping over the second ID. I would like it to where if there is a double or if it is there more than once that it gets all of the data.
Here is my macro.
[Code] ....
I will also attach the document of what I am looking for : Data 1.xlsx
I would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
I am trying to loop through column A and I want to store in an array where I find "App" within the cell value. I am trying to find "App" but will store the whole cell value in the array. I could not figure out the Find method, so I tried the MID function but am having no luck.
Here is my code:
Code: Sub Arraytest() Dim arr As Variant, lastrow As Long, i As Long, f As Long, l As Long f = 0 lastrow = Sheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row ReDim arr(1 To 1, 1 To lastrow)
In D8, the value is Blue. Here is an example with made-up values (X is meaningless values) --
A B C D E F G X Apple X X X X Blue X Pie X X X X Blue
When I use the function, I want it to retrieve Pie, but it always retrieves Apple. Is there a way to ignore Apple? I've tried throwing "Apple" in there a couple different ways, but nothing is working. Or, if I can search from the bottom up, that would work as well.
whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer 'Dim thiswb As Workbook
officen = Range("A2").Value Set thiswb = ActiveWorkbook ' Open the Active Info file Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx" ' Dim sourcewb As Workbook Set sourcewb = Workbooks.Open"Active 20080616.xls"
I have in column D starting D9, I have numbers starting at 1, and may finish at 100. But there could be duplicates, 1,2,3,3,4,5,6,6,7,7,8,9,10,10,11,12,13,.........
I would like to only copy the range D9 to H (End of column D), ignoring all the duplicate numbers, to another sheet.
So on the second sheet, it would be 1,2,3,4,5,6...... with the data copied from E,F,G and H.
I have a sheet with numbers in descending orders with duplicate in one row and their respective value in 22nd row. I want to find the2nd occurrence of that value. (max. occurrence2 is 2)
I have excel printing some sheets to pdf and it works fine on my PC. WHen someone else tries to print it wont work because they arent on "Adobe PDF on Ne02:"...they maybe on Ne03 or Ne08 or ne05...you get my point.
I saw code on here before as to how to find the proper "port" but after a bit of searching, i cant find it again.
Application.ActivePrinter = "Adobe PDF on Ne02:" ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _ "Adobe PDF on Ne02:"
