Text Box Or Cell Area Updating
Dec 11, 2009
I have two sheets in my workbook. One named singledump and the other individualfileselect.
Within single dump i have daily data loaded with certain cells containing comments added for that day of the week.
E.g. Tuesday 3000
Below average clearances, we will look in to this further throughout the week.
What i would like to do is have either a text box area of just simply one cell updating with a the first comment from the week and to then have two buttons back and forward allowing the user to click and the cells will update for the next comment that week or go back to the comment before.
How would i be best going about this? To be honest i would prefer to keep away from text boxes and would be happy with just the two buttons scrolling through specified ranges to update a cell on individualfileselect sheet.
View 6 Replies
ADVERTISEMENT
Feb 21, 2014
I need it to be like:
=B10 2014
(So the first part changes depending on what B10 is but the 2014 always stays)?
View 9 Replies
View Related
Feb 28, 2007
I am just starting to get my feet a little damp with VBA and I am trying to make a macro that will act whenever any text is entered in any cell within a 3x3 square. Whenever any text is entered in any of those cells I would like it to enter a text ( "X" ) in a cell which is specified by a cell in the spreadsheet (this cell will output which cell the macro should write the text in in this format "A:1" or "C:3"). How can I make the program act only in reaction to the user entering thier text, and also, how can I get the macro to read A:1 and enter the text into that specific cell? Any help would be so awesome, the book I have is really difficult to navigate.
View 9 Replies
View Related
Oct 19, 2013
I am trying to fill text in the Text area of the sharepoint page using Excel VBA. I am not able to fill this up.
Given below is the screen shot of the website part which I want to fill up. Above text box is a tool bar which activates when I click on textbox - it's some kind of RichText formatting :
And HTML code of above section:
HTML Code:
<TD valign="top" class="ms-formbody" width="400px">
<!-- FieldName="Solution"
FieldInternalName="Solution"
[Code].....
View 4 Replies
View Related
Aug 7, 2009
I have a problem when I want to print, it will only print a set area. How to I make it print everything, so it prints everything till the last letter on the page?
View 10 Replies
View Related
Oct 18, 2013
I am trying to fill text in the Text area of the sharepoint page using Excel VBA. I am not able to fill this up.
Given below is the screen shot of the website part which I want to fill up. Above text box is a tool bar which activates when I click on textbox - it's some kind of RichText formatting :
And HTML code of above section:
HTML Code:
<TD valign="top" class="ms-formbody" width="400px">
<!-- FieldName="Solution"
FieldInternalName="Solution"
FieldType="SPFieldNote"
-->
<span dir="none">
<span dir="ltr">
[Code]...
View 2 Replies
View Related
Mar 18, 2014
I have a workbook that users can make changes to a simple table and when they push a "Save" button the raw data in the back end is filtered and overwritten with their change. I only want them to change part of the raw data that has been filtered, starting in column G.
I have everything built and working up to selecting the filtered row column G where I want to paste. Their changed data is copied, the raw data filter's on a unique ID and then I'm stuck!
I have this code in there now however it's forgetting I want the visible entry not row 2:
FilterRange.SpecialCells(xlCellTypeVisible).Offset(1, 7).Cells.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
View 1 Replies
View Related
Mar 12, 2009
How do I display text in the data area of a pivot table?
View 4 Replies
View Related
Jan 9, 2012
From the research I've done, it seems that pivot tables do not support text in the values area, period.
Quite a bit of work has gone into aggregating this data, and it's so close, but the text fields are showing 0.
Have a look. Double-clicking on cell C5 (sheet 1) drills down into the individual record. Cell E2 (sheet 4) contains the text value I need--"Not Stated".
Is there any quick workaround to get this text value to showup in cell C5 of the pivot table?
Sheet1
ABCDE3Sum of Provision in AgreementDescription
4Property# of UnitsAdd'l Leasing GuidelinesAgreement Format:Annual Reporting - Deadline:52nd and
Wall000064 Forty Flagler Village218000744 Monroe00008626 DeKalb0000Excel 2010
Sheet4
CDEF1DescriptionPropertyProvision in AgreementSection2Add'l Leasing Guidelines2nd and WallNot Stated0Excel 2010
View 4 Replies
View Related
Apr 1, 2014
I have a report that runs, and it shows users that are in different groups. Within each group are primary users, and sometimes secondary users. Attached is a spreadsheet showing an example of the report in "A7:A52"
What I want to do is have a macro scan column A, and if a group is found, create what I have made in the rest of the spreadsheet (CD6 and below). I manually filled in the data for group 1, and would like it to continue off to the right in the same format.
There are some areas that dont have groups, such as there might be group 1, group 2, and then nothing till group 10 (as shown in the example)
View 12 Replies
View Related
Apr 11, 2013
How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time
View 7 Replies
View Related
Feb 25, 2009
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies
View Related
Nov 1, 2006
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
View 3 Replies
View Related
Mar 17, 2009
I'm trying to make a macro, which search for a cell value of "Year". And from that cell, I want to make a range selection down to the first empty cell in row B or the first cell value with "Contracts of difference".
See the attached document I want to mark row 50 to row 55, and Column A to K. However as this range is in different rows each time, I need to make the selection dynamic. And I belive the heading "Year" is the best reference point.
View 2 Replies
View Related
Feb 12, 2013
I have a workbook with multiple sheets that I need to print.
Is there a way to create a fixed print area within which you can mess around with formatting without extending or shrinking the print area?
I have tried adjusting the margins settings so that they are all the same, but this does nothing to keep a fixed print area.
View 1 Replies
View Related
Mar 8, 2009
I am trying to find a cell address from an area, like this:
A B C
1
2 hello
3
4
I need to find "hello" 's address from A1:C4, I found that the function MATCH works in single row/columns only.
View 2 Replies
View Related
Apr 3, 2012
I have a code Ive been trying to get to work. It works fine with selecting the print area based off a cell value, it just wont update when ever the value changes.
This is on the Sheet's code
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target Range("A1") Then Exit Sub
Call PrintbyName
End Sub
And this is in a module
Sub PrintbyName()
Dim rng1 As Range, rng2 As Range, rng3 As Range, rngPrint As Range
'Refer to the named ranges
With Worksheets("Permit Page")
Set rng1 = Range("$A$1:$bx$603")
Set rng2 = Range("$A$1:$bx$493")
Set rng3 = Range("$A$1:$bx$493,$a$549:$bx$603")
[code]......
I wasnt sure if I was suppose to fill out where it says "nothing".
View 9 Replies
View Related
Mar 12, 2014
I am trying to set the print area based on cell values, but I keep getting errors when running the macro. It fails where I have highlighted, but rc.Value shows as the proper number.
[Code] ....
View 4 Replies
View Related
Dec 8, 2011
I'm looking for a way to set the print area based on the value of a cell. I have a worksheet that prints a 12-page document, with data pulled from separate sheets. At the bottom of these twelve pages is an additional 2-page section that I only need in certain instances.
For example, if a cell (let's call it A1) on Sheet1 says "brown," I need the print area set to include these additional pages. If that same cell ('Sheet1'!A1) reads "yellow," however, I don't need to include the 2 pages in the print area.
View 1 Replies
View Related
Mar 8, 2007
I have a template worksheet that several people use and print from.
The range on this worksheet used is A1:C499
I want the VBA to look at tha last cell that is populated in column A and set the print area to suit.
i.e. the last cell used in column A could be A277. then I'd want the print area to be A1:C277.
View 9 Replies
View Related
Feb 6, 2008
I have various lists of data (using Data > List > Create List...) that do not always have the first cell in the list in column A. I have spent quite a bit of time searching the internet to try and find a macro that will work the same as... Data > Sort > Sort By: Col xx > Then by: Col xy.
Dave supplied me with a macro that will sort a range by the first column:
Sub SortThis()
With ActiveCell. CurrentRegion
.Sort Key1:=. Cells(1, 1), Order1:=xlAscending, _
Header:=xlNo, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End With
End Sub
I have recorded macro that does the same and looked at the code but this uses Range and specifies the cells to be sorted. I have not been able to work out how to modify the code Dave posted to do a minor sort by the second column. I am after a macro that will determine the range (could be a varying number of columns and rows in different places). For however many columns there may be the macro will sort the full width and height by the first column and then the second column, with all the data within a particular row not being split.
View 2 Replies
View Related
Feb 24, 2009
I am trying to trigger a Sub if the value of a cell change. I came up with this which work fine when I type in a new value BUT if the cell is a formula and the value change without editing the formula then nothing happens
Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = Range("L14").Address Then
Selection.AutoFilter Field:=3, Criteria1:=Target.Value
End If
End Sub
View 9 Replies
View Related
Mar 10, 2009
I'm using Excel 2007 to keep a database of daily settlements for financial futures as well as a variety of studies for these daily values. I want to have one page that I can print every morning with the relevent information for the day. So what i'm trying to figure out is how to make the cell on my "Settlements" page always read the last cell of my data column or find the average of the last five cells, for example.
View 9 Replies
View Related
Sep 3, 2008
I am having trouble writing a code for something I need to do. There is a workbook with a worksheet for each month. At the start of every month a new worksheet is added. The opening data in this new worksheet is coming from the closing data of previous month, and some of this data is modified as the month passes.
So, in a way, some of the data for each month depends on the data of previous months. If there was an error in one of the cells, for say, January, and it was corrected manually, it will affect the cell values for feb, march, and so on. Currently, its all a manual process - from copying previous month's data to a new worksheet, and manually correcting errors in each worksheet, which is error -prone and a time consuming process. Is there any way to link each month's data and create an "update values" button clicking on which will update the values for cells in every month's worksheet following the one which had errors in it and was manually updated. It has to one directional.
View 9 Replies
View Related
Jun 19, 2014
I'm using this to update a range of cells after an automatic copy and paste procedure;
Code:
Sub UpdateBtoW()
On Error GoTo HandleError
Application.Calculation = xlCalculationManual
Sheet74.Activate
Dim cell As Range
For Each cell In Range("B1:B50000")
If Not IsEmpty(cell.Value) Then
If cell.Offset(0, 14).Value = "" Then
[code].....
What it is supposed to do is look in column B and find any non-blank cells. If it finds one, it should check the following and update column W as necessary;
1) Column B shows 1, column P is not empty, column W is empty - UPDATE COLUMN W WITH 'Letter 1'
2) Column B shows 2, column P is not empty, column W is empty - UPDATE COLUMN W WITH 'Letter 2'
3) Column B shows any value, (not blank), column P is empty, column W is empty - UPDATE COLUMN W WITH 'N/A'
The issue is that it is updating the cells as required, but it then goes on to fill the entire sheet with 44819 in every single cell.
View 4 Replies
View Related
Dec 11, 2006
Let's say that row a,b,and c contain a list price, discount %, and discount price respectively. I want to be able to change either the discount % and it will recalculate the discount price or change the discount price and it will recalculate the discount %. So to put it more clearly:
cells in row A: Contain the List (undiscounted) price. This will never change.
cells in row B: Will be a discount %. It is equal to:
(list price - discounted price)/list price. needs to be recalculated if discounted price changes. Also, it should only contain data if the cell in Row A - list price - contains data.
All cells in row C: Will be a discount price. It is equal to:
(1-discount %)*list price. needs to be recalculated if discount % changes. Also, it should only contain data if the cell in Row A - list price - contains data.
View 9 Replies
View Related
Jul 27, 2012
I have the below formula working correctly. However the issue is when it pastes and fills down values its using H1 reference in the formula even when it goes to the next column. So basically when it goes to cell I2 it should update the sumifs formula to lookup I1 instead of H1 and so on and so forth for all columns till the loop stops.
VB:
Sheet1.Activate
Dim frmla As String
frmla = "=SUMIFS($C:$C,$A:$A,H$1,$B:$B,$G2)"
Range("H2").Activate
Do Until ActiveCell.Offset(-1, 0) = ""
ActiveCell = frmla
ActiveCell.Offset(0, -1).End(xlDown).Offset(0, 1).Activate
Range(ActiveCell, ActiveCell.End(xlUp)).Select
Selection.FillDown
ActiveCell.Offset(0, 1).Activate
View 1 Replies
View Related
Aug 14, 2012
I am using the Format as Table feature in 2010 and I am summing a range of cells (C2, D2 and E2) with the result in F2. I have linked F2 three rows below the table in cell C5.
When I add new data in the 3rd row in the table feature I can get an updated result in F3 but my linked cell does not update as it is now pushed to cell C6.
How can I have the linked cell update with the new total from cell F3 as it moves relative to the table?
View 1 Replies
View Related
Jun 4, 2013
I have in cell A2 a number, and my VBA is as follows;
If Target.Address(0, 0) = "A2" Then
Application.EnableEvents = False
Range("a" & Rows.Count).End(xlUp)(2).Value = Target.Value
Application.EnableEvents = True
End If
This basically adds any new number typed into cell A2 into a list which starts in A3 then continues down through column A.
I also have another part of my VBA which says;
If Target.Column = 1 Then
Application.EnableEvents = False
Cells(Target.Row, 2).Value = Date + Time
Application.EnableEvents = True
End If
This part works fine and adds a date stamp to my blank cells in column B whenever I manually type anything into column A, however, when the first part of the VBA works the date stamp is updated into cell B2 and I want it to update next to the new entry that has just been added into column A by the first VBA doing its job.
I think I need to change;
Cells(Target.Row, 2)
To something that refers to a Range of cells (would be B3-B5000 for example) but my knowledge on how to change that part of the VBA has now ran out!!
View 5 Replies
View Related
Oct 27, 2013
I'm currently using Excel 2007 to get information from closed workbooks and updating my file.
First of all I create a table on selected range through "Insert table" command having something like this:
Then I have I piece of VBA code that tries to update every single cell of a column in this case it's updating %LD10 column:
But like you can see in first capture, the code updates every single cell with last value of variable fichero, having, at the end, the same value in whole column.
View 4 Replies
View Related