I am facing problem in finding the second large value while my list is having duplicate data.
For Example
my numbers are:-
12,65,45,12,87,90,65,87
if I want to find out the top four value by using the formula:-
=large(A1:A8,{1;2;3;4})
the result is coming like: - 90,87,87,65
instead of this I want the result as: - 90,87,65,45.
I have a list of data that currently has a conditional format on it of =COUNTIF($F$2:$F2,$F1)>1 so that it will highlight the duplicate but keep the first entry blank. I wondered whether there is a way to identify the last duplicate in the list. i imagine this could be done in a column say with an "L".
View 7 Replies View RelatedI need to generate a form letter from values on another sheet. I'm using vlookup and as you know, for duplicate values, only the first reference is given. I have several duplicates and need to pull the correct row data for each instance. I would need to replace each vlookup with the proper formula in my letter.
sample file.xlsx
I have rows of 10 keywords. I want the macros to compare the first row against all the rows except itself, then compare the second row against all the rows except itself, the third row against all the rows except itself, basically looking for duplicates...It will then record in a column for each respective row, the max # of duplicates found with another row..
For instance lets say I was looking at the 15th row, and it looked for duplicates elsewhere. It only found duplicates in the 4th row and the 5th row. In the fourth row, there were 5 keywords common, and in the 5th row there were 7 keywords common. Therefore the max # of common words is 7 for the 15th row, and that is what is recorded.
In addition the number of rows will probably vary it could range from 1 to 500. I included an excel spreadsheet that has visually speaking how this could work, maybe using COUNTIF. Basically it counts the # of common keywords for one row with all the other rows, pastes the count #s to the right, then finds the max of those count #s, copies the max into another column, then clears the count #s, and looks up the next row, repeats the same process. It is easier probably if you look at the attached spreadsheet to get an idea of what i am talking about..
I have a list of IDs that recurs over a time period. It consists of a Start Data an ID Number. These IDs recur over and over again through one month with different start dates.
See Below:
Date ID
12/1/2013 10:00:00 AM 67890
12/6/2013 12:00:30 PM 67890
12/18/2013 06:30:05 AM 67890
From Another List I'd like to pull a max enddate that is within 24 hrs of the start date. There will be multiple end dates. Here is what the other list would look like.
End Date ID
12/1/2013 1:00:30PM 67890
12/6/2013 4:00:45PM 67890
12/18/2013 9:30:00 AM 67890
Seems like using vlookup with the ID as the lookup wouldnt work because it would just pull the first date it found over and over again.
I have enormous amounts of data to sort through (as we all do) and I am trying to link them to unique identifiers for easier data maintenance later.
What I want to do is vlookup from the 'solved' sheet a code, which will search the 'data' table and return the 'DFU' code.
Example 2905.xlsx
I am facing problem to make summary sheet of top 3 value from large number of value of my excel sheet like-
Sheet1
A
Group
B
Name
C
Value
1
Nashid
200145
[Code] ......
Now I want to make summary in sheet2 top 5 value among the list of sheet1 separately from group 1, 2 & 3.
If group number is 1 in sheet1 then top 3 value will be like this-
Group1
Name
Value
Nashid
200145
Jabed
184198
Eman
156622
If group number is 2 in sheet1 then top 3 value will be like this-
Group2
Name
Value
Rubel
172569
Hasin
152304
Monem
104463
If group number is 3 in sheet1 then top 3 value will be like this-
Name
Value
Romel
168251
Nasim
136357
Hasan
120410
I have a large amount of data, in columnA a list of cars, columnB a list of engines, in columnC the city built, in columnD the country to ship, in columnE distance, in columnF the time.
Now some makes, city's and destinations match and sometimes the engine, but i would like to be able to say cellX = (time to ship) where cellA = Ford AND cellB = 1.8 AND cellC = London and CellD = Ireland
The key data is the city built and shipping destination, so i'd like to say if cell A3 = London AND Cell B3 = Ireland AND Cell A5 = Ford AND CellA7 = 1.8 then CellA10 = (distance) & CellA11 = (time)
Vlookup's are of no use due to the large amount of data. But is there a way of writting this command in VB?? or am i missing something in Excel?
I have a large list of in rows with multiple column headings: ie. Name, date, amount. I need to generate a separate list whereby the rows that correspond to a given criteria are extracted and listed sequentially.
I have attached a simple example to demonsrate what i mean.
in the attached spreadsheet, i have a column of colours, and a column of objects- RED book, BLUE hat, etc.
I'd like the criteria that i type in the green cell (a choice of colour), to generate a list of all the items that match that colour, and be displayed in the orange cells. So, if the green cell says BLUE, the list should pick out the BLUE dog, BLUE hat etc.
I have a large list of data in sheet1. The relevant columns contain a unique identifier (column 'N') and a value of either "True" or "False" in column O. Because I don't want users to have to trawl through hundreds of lines looking for the 'False' entries, I have a macro that copies only those records to Sheet3. In this sheet the user can set the 'False' value to 'true' but I don't know how to return the new value to Sheet2 (possibly for multiple records).
View 9 Replies View RelatedEach sheet contains 30,000 rows of data in column A, C, E, G and I.
I want to find each cell of column A, C, E, G and I to another sheets column A, C, E, G and I respectively.
If match found then it should return "True" in column B, D, F, H and J.
I have tried VLookup, but it takes too much of time for calculation (1,50,000 vlookup Formulas needs to calculate in each sheet with If condition) some time calculation gives wrong results.
As well as I want to do filtering on this all the data... so that time calculation gives the problems (I have used application.Calculation=xlCalculationManual)
So now I am using Range.Find method, but that loop excecutes for 30,000 times and each ittration contains 5 Find methods.
(Excel for Mac 2011). The size of my data means am crashing by usual methods of sorting - I need a formula for this rather than pivot tables.
I have a list of c. 40,000 rows. Col A is client name (largely different but some duplicates); Col B is Policy type (eg Home, Motor, Travel) and Col C is earnings on that policy (eg -60). An example would be:
Name
Policy Type
Earnings
Johnson
Home
[Code]...
So I need to figure out (via a formula) two things:
1) How to count duplicate names (eg appearing 3x = 1 customer; appearing 2x = 2 customers; appearing 1x = 1 customer)
2) How to build a simple table to show the relationship between policies. This would have Motor, Home, Travel, Motorcycle as columns and also as rows - the data would then be how many policies and in each cross point?
I have tried just working the data using Countifs etc, but as soon as I apply it to the whole data set the machine freezes, presumably due to its size
I am including a sample. On sheet 1 I am trying to do data validation in that large merged cell using List and =Cements. Why do I get the error that pops-up?
View 5 Replies View Relatedsee attached sheet. Column A has File Name. Need to highlight the duplicate data as you can see there is 2 duplicate data which i have manually highted ( C19 is duplicate of C12, C83 is duplicate of C84).
View 4 Replies View RelatedI found a lot of information on this but not what I need. I have 8 columns A - H. Column D has some duplicate numbers. I would like to find the duplicate numbers in column D (they are all one right after the other) and delete the entire row leaving only the first. I do not need to sum or anything, just delete the row with a duplicate number. If there are 2 or 3, I just end up with one.
View 2 Replies View Relatedcompare and find exact matches b/w the data in columns J and K in the attached csv file. I would simply like all rows with exact matches to be hidden. I can simply change any code to reflect something like
Selection.EntireRow.delete
later if necessary.
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
I have been facing few problems while automation my production sheet through formula.
1-- I want to sort data in the descending order through below formula.
=INDEX($A$23:$C$29,MATCH(LARGE($C$23:$C$29,ROW(B3)),$C$23:$C$29,0),MATCH(H$22,$A$22:$C$22,0))
when two candidates have the same percentage then this formula does not work.
I have a spreadsheet that needs to have a validation drop down list in three cells in every row (D, E, F). There are three items in the list, say, "One", "Two" and "Three".
My only problem is that there can only be one entry of "One" in each row.
In A1 to A10 I have numbers 1 through 10.
In B1 to B10 I have some of the numbers listed from column A, but not all, and in no particular order.
In column C, I would like to list only numbers from A that are not listed in B.
I have data (e.g. PPL0106AU) in columns A (Rows 2 to 104) & C (Rows 2 to 303) and need to identify which entries are in BOTH columns.
I've entered in column B: =IF(MATCH(A2,C$2:C$303),A2,"No")
This formula is resulting in a duplicate of column A in column B.
Book 1 sheet1 A
1234567
1234567
2658798
4083029
5507260
6931491
8355722
9779953
11204184
12628415
14052646
15476877
16901108
Book 2 sheet1 A
2658798
4083029
5507260
6931491
8355722
26587965
26365785
26143605
25921425
25699245
25477065
25254885
25032705
24810525
I need get the result Book 3 Sheet 1 A
All duplicates items from book 1 and book 2
I have made up 7 worksheets that are completely identical with exception of course to the data they contain. I have a master sheet that contains some of the data from each of the other sheets that will be shared between them. Things were working very well until I discovered that some data was duplicated on a couple of the sheets; and I am in need of adding more worksheets.
The formula I am using for this will not allow me to have more than the 7 worksheets. It is an IF statement array. So now I am wondering how will I be able to add these extra sheets. I would like to use my worksheet names in a range but have evidently done something wrong and could not get that to work before, ending up with this very long 'IF'. !Can worksheet names be used to create a named range?
Also, I would like to know if there is a way to prevent duplicate data on these sheets. I am using conditional formatting on each sheet now, but that of course only works on the current sheet.
I have created a Data Validation list in one of my spreadsheets which works fine. The list itself has no duplicates which is fine but when I select my entries in the other spreadsheet, I want to make sure they cannot select the same value twice.
I tried selecting "List" in data validation and using an AND with COUNTIF but it doesn't work.
=AND(Employees, countif($A$1:$A$20,A1)=1)
I need macro that will check for list of duplicates in sheet1 and place the duplicate data in sheet2.
I know how to check duplicates in only one column.But now my sheet having lot of columns.
I have a sheet with many columns of data relating to different companies as shown below (obviously my actual sheet has much more data):
NOTE: the Mr. Excel forums display the data in the correct form. I've tried to fix it here but obviously that didn't work perfectly, so if you want to view it correctly, click on the link above.
Comp Name Facility Name Product Name clean date
Comp A
Plant 1A Prod A1 11/11/2008
Prod A2
Prod A3
Prod A4
Plant 2A Prod A1000 12/1/2008
Prod A1001
Comp B
Plant 1B Prod B1 12/5/2008
Prod B2
In a new worksheet I want to see only the information relating to the Facilities, specifically the clean date of each facility, such that the information looks something like this:
Facility Name clean date
Plant 1A 11/11/2008
Plant 2A 12/1/2008
Plant 1B 12/5/2008
I know that I can use a simply vlookup formula such as the one below:
=VLOOKUP(C21,Info,3,FALSE), where C21 is the Facility Name and "info" is a list of the last 3 columns of my initial datasheet. However, I need to remember add each new facility name to the 2nd list when it is added to the main datasheet.
Is there a way to have the 2nd sheet automatically add the new facility name every time I add one on the main sheet, but without showing the many empty rows inbetween?
I'm looking for a formula that would tell me if a value in colume E can be found in column M while the values in column M may have characters before and after the value I'm looking for. The values are alpha and numberic in many cases.
Find E2 in M:M where E2 = 0123 and is in M:M as a15012388. The "yes/no" result is marked in red where I would like to have the answer.
Description
Looking For
Yes/No
[Code].....
So what I have is a large list of items, and each item has the price of the product, and a product type.
What I want to do is find the median price for each specific product type, using a formula, without having to sort or filter my large list of products.
I have a very large numbered list in MS Word, in the following style:
1. Animals
1.1 Mammals
1.1.1 Dogs
1.1.1.1 Beagles
1.1.1.2 Pugs
1.1.2 Cats
1.1.3 Elephants
1.2 Fish
1.2.1 Cod
...and so on.
I am trying to bring this data into Excel (2007) but in a way so that:
"Animals" goes into column A.
"Mammals" and "Fish" go into column B (in their own cells, in different rows).
"Dogs" and "Cats" go into column C.
"Beagles" and "Pugs" go into column D...
and so on.
The idea is to have each line in a different row, but have the columns serve more or less the same function that the tab indents do when looking at it in Word. (I'm trying to create a "breadcrumbs" style list for each line item). I've tried using tabs as a delimiter for importing text into word, but it doesn't seem to recognize Word's tabs when applied through a numbered list.
I am trying to do is create a list from a large table (see attached). I have 2 columns (A and B) listing 'Asset' and 'Area' and then 2 rows (1 and 2) listing 'type of task' and 'task'. This forms a table with entries in the cells (from C3 onwards) denoting frequency of each task at each location, i.e. daily, monthly, 6 monthly and annual. This gives me quite a large table which is quite confusing. Can I create a formula to sort all the daily activities which will give me a list of the 4 corresponding properties 'country', 'location' (in columns A and B) and 'type of task', 'task' (in Rows 1 and 2)? Then do the same for the different frequencies populated in the table, 'monthly', '6 monthly' and 'annual' ???
View 7 Replies View Related
