I have some 8000 rows of data consists of a survey.
I need to find out TOPPERS of each SUB_CODE which are available in a single column.
I have clearly mentioned the problem and the solution required in the attached workbook.
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
Please refer to attached sheet.
I have numbers in column A thru G.
I need unique numbers from this list in column J as shown.
In an excel sheet i have around 10 columns.
I filtered the data based on the column1 using vba. Then after that, the filtered data in column2 have repeat finance accounts. What i need to find the unique finance accounts under the column2.
Is there any methods to find the unique value under the column2?
I have a challenge I haven't quite been able to figure out:
I need a 6 digit trace code to be automatically generated for each job based on the date, the product type and the job number.
The first 2 digits on the trace-code are alphanumeric and the sequence for each job is AA, AB, AC etc.
The last 4 digits are a date code (YYWW.... two digits for the year and two digits for the week number).
The criteria is that multiple jobs of the same product type within the same work week must not have identical trace codes. So Job 1 gets "AA" plus the date code... Job 2 gets "AB" plus the date code, etc. If Job 3 is done in the next work week, it cycles back to "AA" and gets the new date-code.
Generating the date-code was simple enough, but coming up with a function or rule to assign the two-digit alpha has been a challenge that I have not been able to beat.
Below is an example of how the Trace-code column should work....note that Trace code on one product type might be identical to the trace code on another product type.
A
B
C
D
1
Date
Product type
Lot number
Trace code
[Code] .........
My goal is following:
I do an inventory of my schools equipment and have much info in many columns. But I just want to concentrate on column A.
This is example of the room names at my school and look like this:
Column A
A01
A01
A02
A02
....
I have a wookbook with serial numbers in column A and barcodes in column B. There are 51940 rows in total.
Is there a way I can search through column A, and for each unique value found , concatenate all of the barcodes that relate to that serial number in column C?
Serial Numbers | Barcodes | Combined Values
-------------------------------------------------------
abc123 abc12300 abc12300,abc12301, etc etc
abc123 abc12301
def456 def45600 def45600, def45601, etc etc
ghi789 def45600
i am using Excel 2010.
I have data in excel sheet in the below format:
Existing view.png
How to write a VBA code or Macro to get it in below format:
Required View.png
Timestamp column is the unique key.
I have this macro below and would like the code changed to find the "Customer Number" column by name rather than by column B. Note that the "Customer Number" column will always be somewhere in row 1.
View 12 Replies View RelatedI've been trying to modify the following code to find the value "Module Index" in column A. I then need the code to save the row number that the value was found in and copy a range from ("A2:V row number")
I keep getting an "object required" error on the following code line
Set intFindrow = wbTargetBook.Sheets(strName).Range("A:A").Find(What:="Module Index", LookIn:=xlValues)
[Code] .....
Short and simple. What is the quickest, easiest & most efficient way to find the first blank cell within a column using VBA?
I have a spreadsheet where a date is entered in column A with data in B-F. I am trying to write code to look in column A for a specific date and enter additional data into columns G-L on the same row. It needs to be able to skip the rows that are blank. So I have the dates of 12/1, 12/2 and 12/3 in column A rows 1,2 and 3 and I want to enter data for 12/2 on row 2 skipping the blank cells in row 1 for 12/1. Here is the code I have below.
VB:
Private Sub CBSecure_Click()
Dim my_name As String
Dim r As Variant
Dim l As Long
sFind = DockDoorCal.Value
If Trim(sFind) = "" Then Exit Sub
[Code]....
code to find/replace the letters: "A" with "Active", "P" with "Contract", and "C" with "Settled sale", all in column "Q".
View 2 Replies View RelatedI am trying to clean up and simplify my macros by compartmentalizing frequently repeated commands. I like to search for text in column headings and define the cell containing it as a range that I can later use .column or .row commands on, so my macros are a bit more flexible. The code I currently use for this is
Dim XColumn As Range ‘the cell containing the text “X”
Cells.Select
Selection.Find(What:="X", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Set XColumn = ActiveCell
I would like to be able to create a Macro (possibly name FindSetCell()) that will accept arguments and achieve the results of the above code in other macros
I think the command might look something like FindSetCell(“text to be searched for”,”name of newly Defined Range”) But I have not figured out how to code it
I have a list in D2:H2 with values {A,A,B,C,D} how can I get the 3rd unique value in this list?
the formula should output C. I have been trying this for a while.
Using a formula,
How can i get excel to create a custom unique number using the first three (or two) characters from another field and then adding four unique numbers to the characters.
basically heres the info
Field H2 contains the characters "ACS" so i would want another field to create a unique code to include something like "ACS1234" and to continue to the next row would be the first three characters of field H3 then 1235.
I have a list of data and I want to identify the unique entries for both columns but the second column has to unique to the unique values in the first column.
Example List
Fruit
Color
Apple
[Code]....
I have a column with serial numbers, i want to go through that column and store all the unique serial numbers and the number of occurrences. then i want to know what is the highest occurrence.
View 9 Replies View RelatedI am using excel 2007.
I am trying to find the sum of unique entries in a table such as below for each respective date.
DateClient1/01/2010ABN1/01/2010ABN2/01/2010BNP2/01/2010HSBC3/01/2010ABN4/01/2010BNP4/01/2010HSBC4/01/2010ABN5/01/2010BHP
The results should appear as
Count Unique1/01/201012/01/201023/01/201014/01/201035/01/20101
What formula would I use to calculate this unique count?
see the attached spreadsheet including the data. In Column AA I have created a formula that looks at Column B, and pulls each unique value from that column. add to this formula, or propose a new one, that pulls unique values into column AA if at least one of the rows has an "Actual Finalization Date" in column D that is in 2014?
View 1 Replies View RelatedHow would I count unique dates associated with another specific value on a worksheet?
For instance, Lets say I want to count each day a particular person makes a sale.
Example:
Sales PersonSale IDSales Date
Don 1001/6/2014
Don 1401/7/2014
Don 1601/8/2014
Jack 1011/6/2014
Jack 1021/6/2014
Mike 901/5/2014
Mike 1031/6/2014
So on another worksheet, I'd have:
Sales Person Days with Sale
Don 3
Jack 1
Mike 2
The Formula would go into the "Days with Sale" Column.
I have values in COlumn A, probably about 50K rows, The total unique values on the column A is only about 27. I need to capture all those unique values and paste them in column B. I didn't want to do "Advance filtering" since the workbook has many macros's on it that the user simply click on. Im thingking of creating a loop and compare values already pasted in Column b but then that will take too much time to complete the loop. Is there any easier or yet more efficient way to accomplish this?.
View 2 Replies View RelatedI would need to count unique frequencies in column A, but only for a specified value in column B.
Example:
A|B
1|1
1|1
1|1
2|1
2|1
2|2
2|2
3|2
3|2
I am using Excel 2007 and found this formula that counts all unique frequencies in column A: =SUM(IF(FREQUENCY(A2:A10,A2:A10)>0,1))
In my example, result = 3 Now, I would need to add the possibility to count only for B=1; in my example, result should be = 2.
In the attached file, details sheet contains multiple instances of project with associated costs for each of 2006, 2007 and 2008. What I need is a formula (preferably) or a VBA that select distinct project names and populate column B of summary sheet so I can do a sum if. The problem is the project names changes dynamically every week and they are practically in hundreds.
View 9 Replies View RelatedI have a spreadsheet that holds customer information. What I want to do is find how many customers there were last month. I have a cell (C1) which has last month displayed as 2009/05. A1 holds the customer ID and B1 holds the date they used us. Each customer may has used us many times and I'm having a nightmare trying to solve this.
View 8 Replies View RelatedWhat's the formula that will search a column of values and "pull out" only one of each unique instance? The expected result, then, for the following data-set would be 4,5,6,7,8,9.
4
4
4
4
4
5
5
5
6...........
I have scoured the Excel boards but cannot find what I am looking for. Need to do a formula approach (No Pivot Table) lookup on a dynamic table that is not necessarily in order and may have blanks in some cells or whole rows. What I would like Excel 2003 to do is report (extract) the all first occurrences of each organization number that has at least one person with a "Yes" in a corresponding column in the same row. I also need the number of persons that have "Yeses" in each of those identified Org Nos .
Data is laid out as such:
Org No. Name Not in Compliance
8631Steve Yes
8631David
8631Nick
8631Tom
8631Susan Yes
8701Peter Yes
8701Diane Yes
8701Mary Yes
8879Don
8879Bernie
8879Wayne
8900David Yes
The answer is
In one row list the org #'s not in compliance ("Yes"). In the row just below it the number of persons:
86318701 8900
2 3 1
I have a helper column that counts the number of unique org nos, but cannot tie that to those that have Yes in the other column.
In column before Org No i have =IF(COUNTIF(b$33:b34,b34)=1,MAX(a$33:a33)+1,"") copied down.
i have 2 different spreadsheets
sheet 1 and sheet 2
in sheet 1 i have suppouse following data
Name-- Prod. --value --year
-- a -- 24 -- 100 -- 2004
-- b -- 26 -- 240 -- 2004
-- a -- 33 -- 120 -- 2004
-- a -- 21 -- 200 -- 2004
-- c -- 26 -- 240 -- 2004
-- b -- 33 -- 120 -- 2004
-- d -- 24 -- 100 -- 2004
in sheet 2
Name -- Prod. -- value -- year
-- a -- 24 -- 100 -- 2005
-- d -- 26 -- 240 -- 2005
-- a -- 33 -- 120 -- 2005
-- e -- 26 -- 240 -- 2005
-- a -- 21 -- 200 -- 2005
-- c -- 26 -- 240 -- 2005
-- d -- 24 -- 100 -- 2005
in this situation i want to find out the dropouts of sheet 1. (that persons which are not present the sheet 2)
how can i compare these sheets?
in this case i want the result as
-- Name -- Prod. -- value -- Year
-- b -- 26 -- 240 -- 2004
-- b -- 33 -- 120 -- 2004
Index Match lookup formula does not find valid entries that exist in the lookup table. Formula: =INDEX(tbl_Costs,MATCH( F8,tbl_Costs_PN,0),MATCH("Cost",tbl_Costs_hdngs,0)). I've verified that the matching criteria and values are, in fact, in the table and have made double sure that all cells are formatted the same. the attached file and show me the error of my ways.
View 7 Replies View RelatedI have a worksheet with Coulmn A and B , wherein , Column A has a list of values that can be duplicated. Based on the values in Column A, I want to fill corresponding cells in Column B. see the attached.
way to accomplish the same. Tried VLOOKUP.