I need to go down column C and find the word "Canada" and the find the word "Total", there are some blank spaces between, and select from "Canada" to "Total" in column C and the cells in the same rows from column C to column H.
So if Canada is in C15 and Total is in C29, select C15:H29.
I'm trying to create a macro to help me with a running issues list. I what to be able to have an issues column and a fix coulumn. Then I'll have an open issues section and closed/fixed issues section. all issues that do not have any Information and date in the fix colum will stay in the open section unitl the fix is entered and then when I run my macro it will move any open issues that have data in the fixed column to the closed section)
View 2 Replies View RelatedRefer to the "Example" file I have uploaded. Basically I want to turn table on the left to something similar to the table on the right by adding an additional column to put in card number related to the transaction in each row, so I have information of the transaction and its corresponding card number in the same row.
Example.xlsx
I have a checklist that I need to have do some different things.
I have two "sections" - not really sections but paragraphs so to speak. On each first line I have a checkbox. Now if the user checks "section" 1, I need the checkbox to change to NA for the "section" 2 first line.
Is there a way to copy all of the data in a cell up to a certain character? I have the following data contained in a cell, and want to copy everything up to the first -v and paste it into another cell. The trouble I am having is that the data to copy will be of a varying length, so I can not use anything involving a count function. I would prefer to do this eiter by macro or VBA:
View 4 Replies View RelatedI have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
[Code] ....
I have the text value "Ball, Red" somewhere in column A. I don't know which row it's in because it will never be in the same row twice. I need a macro to find this value, then, copy that whole row and "insert copied cells" right below that row and change the value in the newly created cell from "Ball, Red" to "Red, Ball".
I tried macro recorder to do this and had no luck...
Cells.Find(what:="Ball, Red", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Selection.Copy
Range("A21").Select
Selection.Insert Shift:=xlDown
Range(Selection, Selection.End(xlToLeft)).Select
Range(Selection, Selection.End(xlToLeft)).Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "Red, Ball"
Range("A22").Select
That's is all there is to it on this one.
I have a macro that was working fine until I added a new column to my active sheet. Now it fails with a run time error 1004, insert method of class failed. The code is as follows:
Private Sub UpdatePart_Click()
Dim S As String
Dim r As Excel. Range
Range("A2").Activate
S = InputBox("Enter the part no. you wish to update")
On Error Resume Next
If S = "" Then 'Exit Sub
'If StrPtr(S) = 0 Then
MsgBox "Update Cancelled"
Else
Set r = Columns(1). Find(What:=S, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)...............
way to search for a value in a cell (an unique one) using an input box and then if the value is found copying the whole row of the cell onto a new worksheet in the next available row within a table.
I am currently using the following archaic codes:
x$ = InputBox("Please Enter Catalogue Number")
For i = 4 To 500
If Sheet2.Cells(i, 1) = x$ Or Sheet2.Cells(i, 7) = x$ Or Sheet2.Cells(i, 8) = x$ Or Sheet2.Cells(i, 9) = x$ Then
Sheet1.Cells(6, 1) = Sheet2.Cells(i, 1)
Sheet1.Cells(6, 2) = Sheet2.Cells(i, 2)
Sheet1.Cells(6, 3) = Sheet2.Cells(i, 3)
Sheet1.Cells(6, 4) = Sheet2.Cells(i, 4)
Sheet1.Cells(6, 5) = Sheet2.Cells(i, 5)
Sheet1.Cells(6, 6) = Sheet2.Cells(i, 6)
End If
Next i
End Sub
this has the problem that i can't fit it to the next available row and have to be specific for each row.
it would also be great if i could put a messagebox in cases where the data is not found, basically saying that the item does not exist and if a simple excel Ctrl+F button or something similar could be attached to the msgbox so that the item can be searched and then added to the next available row.
I am attempting to do is have a macro (Via Command button) go through column A to find the word "TOTAL". Once that is found I want it to offset by 3 rows (from the word "TOTAL") to grab the number and place it into column B.
View 2 Replies View RelatedI have a spread sheet with bunch of rows and columns. Columns goes all the way from A ... BB and rows from 1 to 40,000
The main focus is column Y and AC
If there is a value of FALSE found in column Y then macro should go to previous row and copy the value that contains in column AC and then move down to the next row, , where the value FALSE was found and that's in column Y and paste that value in column AC the NUMERIC VALUE
Below is the data ...
I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.
Sub Findall()
Dim y As Long
Dim starta As String
Dim tr As Long, tc As Long
Dim sr As Long, sc As Long
Dim s As Worksheet, t As Worksheet
Dim SourceCell As Range
'Setup
Application. ScreenUpdating = False
Set t = Sheets("Target Sheet")
Set s = Sheets("Search sheet")
Set SourceCell = ActiveCell
Do While IsEmpty(ActiveCell) = False
Counter = 1
'Get last used row in Target Sheet
t.Select..........................
see attached spreadsheet. In sheet 1 I would like to look up each word in column D, seeing if they are in column B at all. Note if the word "Jill" is in D and "jilly" in a surname in B I would like it to get picked up. I have highlighted manually those that would get picked up. Those that do get picked up I would like to be copied into column C as per sheet 2 (this is what I would like it to end up like). There is a very long winded way of doing this using a find function and 1 column per word but as the actual sheet i'm using has thousands of different words this isn't really viable!
View 8 Replies View RelatedBasically this is what I want to do:
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1
2. Copy the entire row containing the non-blank values
3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
I have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.
I've been trying to modify the following code to find the value "Module Index" in column A. I then need the code to save the row number that the value was found in and copy a range from ("A2:V row number")
I keep getting an "object required" error on the following code line
Set intFindrow = wbTargetBook.Sheets(strName).Range("A:A").Find(What:="Module Index", LookIn:=xlValues)
[Code] .....
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
I am going to explain the issue with a photo linked below
Capture2 | Flickr - Photo Sharing!
Basically i want to match data from column one with data from column 3 if true then copy the data in column 2 to columns 4 in the same match row.
I am in the process of writing a VBA code(I should I am fairly new to this code writing!!!).What I need to be able to do is below.(enclosed please find a output in an xls file) What I should be able to do is below:
1.Find the text "Cash(No Listing)(Monthly)"
2. Offset to the 13th Column after that
3.Select the value in this column ,copy the value
4.Go to a row above and move one column to the left i.e.offset (-1,-1) and move 12 column backwards i.e.offset(0,-12)
5.Copy the value in 3 above to this entire range
6.Repeat this process for the entire file
My code is as below.Let me know where am I making a mistake. Just to let you know that this code performs the job well for the first entry i.e in the yellow makde area and doesn't do the job for any further entries .Llooks like I have some problem with the loop but not sure as to whats happening!
I went through all the forums but confused a little. In the work sheet I want Excel to find an exact word such as letter "a" in all over the work sheet (not a column name) and paste it to the destination work sheet. I am attaching an example file, can some help me to solve the problem.
View 9 Replies View Related1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace()
'
' Macro2 created by david
'
' for the entire sheet, moving from one cell to the next down the column, changing rows
' search for the contents in another sheet, and then if that is found,
' copy the row number to a variable, and then
' copy column K from sheet 1 to column N of sheet 2, using the same variable above
' after that same, but L goes to P.
'
'
Windows("file1.xls").Activate
Rng = Selection.Rows.Count
Dim toFind As String
ActiveCell.Offset(0, 0).Select
Application. ScreenUpdating = False
Dim i As Integer
For i = 1 To Rng
Windows("file1.xls").Activate
toFind = Range("A + i")
Windows("file2.xls").Activate
I have a document which is full of HTML code. Please find attached. I have copied the information into an excel document and I need to find Twitter addresses i.e @test123 and place these in a separate column.
If i make a search there 190 of these addresses.
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 Replies View RelatedI need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
I want when I choice the section name,The report will display only selected section sales.
I have tried the function " SUMPRODUCT", But it's display all sales regardless section name.
I am wanting to select a section of a cells data, which can be shown in a selected cell using a formula i.e
AB1350309280000768436000076843
In the example above I want to exclude the first 8 digits and the last 1 from cell A1 and show it in B1
