I have a command button that will run paste a value in a specified cell but I also need it to check for the next open cell and paste the data if the previous cell in a specifid rage is already filled with data. Here is my code I have below. *jumps with Joy* My Range is E6 to E10
VB:
Private Sub CommandButton1_Click()
Dim f As Double
Dim t As Double
[Code].....
i need to make a formula for excel which will verify if my actual value falls within a specific range. for instance if my value is 0.15 and the allowed range is 0.145 to 0.155 then i want to display the number zero in the cell however if the actual number is above or below the range i want to calculate the amount of deviation from the range
View 2 Replies View Relatedi have my data in coloumn G. and i am trying to create a macro to copy all the data in coloumn G:G to cell K1. i am doing this so i cand simply extract some data to other cells useing the search formula.
View 9 Replies View RelatedI created a new workbook that contains a list of additional design requirements than our old checklist. These requirements are answered by placing a 1, 0 or .5 in the cell next to the requirement (1 = yes, 0 = no and .5 for half credit). I can't simply go to the old workbook/worksheet and copy the results into the new workbook/worksheet as the rows of requirements don't match up since some requirmements have been deleted and new ones added between the old and new checklists.
I created a command button in the new checklist and what I want it to do is:
- open a dialog box that lets me select the old checklist file (these are all excel files, but with different names).
- go the the proper worksheet in the old file (DFT Checklist) and copy a column of results from the old checklist ("DFT Checklist" worksheet) and paste them into the proper cells of the new checklist ("DFT Checklist" worksheet).
- The macro would know (i'll have to tell it) which requirements and cells are still valid answers between the old checklist and the new one. It would disregard requirements that are no longer in the new checklist.
- Once complete, it would close the old checklist without saving.
I want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
I am trying to create a macro that will look in Column B for the word "RPLCASE." Whenever "RPLCASE" appears in Column B, the cells in that particular row will move over (Right) one space. I am simply trying to align the data from a file that I FTP'd from Net Term to Excel. You can see how the data should look in the 2nd example.
14-Feb-08JERRPLCASE671150536:116:56RPLCASE78308147:077:54RPLCASE89431228:228:57RPLCASE910592289:159:59RPLCASE10114732310:0010:48RPLCASE1112146811:4511:58RPLCASE12136563612:0612:56RPLCASE13144122113:0313:58RPLCASE14154642314:0114:23**********--------------TOTALS4632228LDLPKGPIK671361126:046:58PKGPIK781461247:007:56PKGPIK8963598:168:55PKGPIK9101591309:019:59PKGPIK101115113910:0010:54PKGPIK1112968711:3211:59PKGPIK121319916012:0012:59PKGPIK131412310313:0013:59PKGPIK141518716414:0014:59PKGPIK15161119715:0015:54PKGPIK16173316:3016:31**********--------------TOTALS13741178
Currently i hav list of info that is long like this.
A 1
B 2
C 3
D 4
E 5
F 6
G 7
H 8
I 9
J 10
How to move row to column example below. Because i want the data to be printed on an a4 paper which can fit around 3 row to save space . If i manually copy paste page by page it is too much.
A 1 D 4 G 7
B 2 E 5 H 8
C 3 F 6 I 9
===
Currently i have macro code which roughly does this.
A 1 B2
C3 D4
E5 F6
G7 H8
I9 J10
Sub test()
Dim rng As Range, m As Integer, c As Range
Columns("c:E").Delete
m = 2
Set rng = Range(Range("a1"), Range("a1").End(xlDown))
Set c = Range("a1")
Do While c <> ""
'MsgBox c.Address
Range(c, c.Offset(m - 1, 0)).Copy
Cells(Rows.Count, "c").End(xlUp).Offset(1, 0).PasteSpecial Transpose:=True
Set c = c.Offset(m, 0)
Loop
End Sub
What I want to know: Is is possible to have information from one spreadsheet move specific data to another spreadsheet in the same workbook?
for example: I have hundreds of listings of tool measurements.
Date Tool type Measurements
What I want to do is have all the different types of tools and the information from the above line seperated into other spreadsheets. I do not want to sort this information and manually move it I want a formula that will move each applicable tool into that sub sheet. I have tried to use if statements but find that it creates subsheets with the correct tool types but has the spaces in between the parts. how do I eliminate the spaces?
How to do what I am about to ask takes time and time causing brain overloading. I have made screenshots but I can't upload them. I get red exclamation point with images sizing ~55KB
View 9 Replies View RelatedI work with a sheet with active columns B thru I, which get daily numeric entries. The problem is that I have to enter data in columns H & I first, then go back to B thru G. how to force the cursor to jump to column B when I tab out of I into J?
View 5 Replies View RelatedI'm trying to force Excel to open to a specific cell (say A1) on Sheet 1 each time the workbook is open. Sheet 1 is named Start.
I am looking to use the formula's to determine if the contents of a cell, match or meet a given formula.
In this case, 3 alpha + 3 numeric, e.g. ABC123.
I would want it to return a TRUE or FALSE.
I've done it the long way by tearing apart into the 1st through 6th characters, but would enjoy a more succinct method.
I have to open each pdf file in a specific folder, select and copy all contents and paste it in column 'A' of a new workbook.
I have tried following code but not worked...
Code:
Sub ConvertPDF(control As IRibbonControl)
Dim AdobeApp As String
Dim AdobeFile As String
Dim StartAdobe
Dim fso As New FileSystemObject
[Code]...
I have Acrobat Reader installed. Any method without using 'SendKeys'?
I want to do is have a formula that will return a result if the cell contains a full stop "." and the at symbol "@". Something like a countif contains, but I'm struggling to find a solution where it contains both symbols.
I'd like the formula to return a 1 it finds both symbols, and a zero if it doesn't find both symbols.
I would like to use conditional formatting verify that the lines of data being pulled from my application into Excel, but totaled using "=sum" are equal to totals pulled directly from my application. I believe that I should be able to use conditional formatting but am not sure how to make the formula work correctly.
To illustrate my problem: I have cells A1 (a total of a range), A2 (also a total of a range) and A3 (total of data pulled directly into my Excel report). In cell A3 I would like to verify that lines A1 + A2 - A3 = 0. This I can do without any problem, but there is rounding involved. The total of the above formula should be between -1 and 1 and still show as correct. I want the number in A3 to show up in red/bold when incorrect.
What am I missing here? I followed http://www.fontstuff.com/vba/vbatut07.htm and I have this code but nothing happens when I click on 'M6'.
Private Sub Calendar1_Click()
ActiveCell.Value = Calendar1.Value
Unload Me
End Sub
Private Sub cmdClose_Click()
Unload Me
End Sub
Private Sub UserForm_Initialize()
If IsDate(ActiveCell.Value) Then
Calendar1.Value = DateValue(ActiveCell.Value)
Else
Calendar1.Value = Date...............
Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
What im trying to do is have a macro that will open a file called Blue 1.xls in location "I:SchedulesBlue" and then copy data from cells N13:034. Then paste it into another excel file (Press.xls)on worksheet "Press Break" cell G14.
The data that is copied not always fills up the cells N13:O34 so I need it to go to the next blank cell in column N and paste the information from file Blue 2, and so on for Yellow 1, Yellow 2, YellNR, and Green.
So to summarise I need a macro to open 6 files copy data from the same location on each of the files(N13:O34) then close and paste it into a master document(Press.xls) worksheet "Press Break".
I am having the same problem as this thread Dynamic Ranges with blank cells.
I've recently been pointed in the direction of dynamic ranges (named ranges that use OFFSET and COUNTA to expand to cover the whole of a list, even if the number of rows used is frequently changed).
They seem to have a big drawback, in that the range will not go to the bottom of the list if the list has blank cells in (because the COUNTA for the column of interest does not equal the number of rows in the list).
A typical named range might look like this:
=OFFSET(Sheet1!$A$2,0,0,COUNTA(Sheet1!$A$2:$A$25),1)
I tried to post in it but it's too old.
I have been to the link posted in that thread about advanced dynamic named ranges but inserting a row with numbers in it and then hiding it is not suitable for me as i deal with other peoples spreadsheets so need to always be working with the Active Sheet.
Is there other syntax that can be used other than:
Range("A23").Select?
I'm trying to move to any cell below some text. So, it will find "Total" and move the cell below.
Also, is there any way to specify to select cells without specifying the actual cell name?
How do I truncate a range of numbers where a number will not show more than 2 past the decimal ....and this be in vba as part of a macro.
View 3 Replies View Related(1) I want to find the maximun number for the past n periods in a range of cells, but I want to be able to vary n by changing the number of periods in one cell at the top of the sheet, i.e. if i enter 10 in cell A1 the function will return the max number for 10 periods over a certein range, if I change the figure to 20, then the max number for 20 periods will be returned!
(2) I have a column (lets say column c) which will return a number of values if my criteria are met and 0 if not, I want a function in another column which will replace the 0 with the next non 0 figure in column c, the gaps between the non 0 figures can vary. I feel it involves looping in some form, and writing a new function, but I am not sure.
I've been trying to figure out how to use a formula that would enable me to copy/copy & move a range of cells right one column if a certain criteria is met.
Basically, if a criteria is met, I want to 'copy' everything from a row to another row, but offset it by one column (so that what was in, let's say, a1 would be in b2).
I've been tinkering with index(), if() and offset() in various combinations but think I must be missing something.
how to move formula range without inserting any rows. For example, I have a sum(a1:a3) and I need to have sum(a2:a4). I have hundreds of these little formulas through the spreadsheet and they are driving me crazy. Is there any way I can select a block of data and have a macro simply shift all formula ranges within that block one down? Copying the formulas down and then moving the result in place of the original doesn't work as I have formulas relying on these results and I will get #REF errors. I bought an Excel VBA for dummies, but have been so swamped with work that I haven't had a chance to look at it, or even to think about where I would begin to look.
View 1 Replies View RelatedIm trying to create a macro that when ran it copies all information from that row and puts it on a different worksheet. It needs to be put on the next available line in the new worksheet. and then the information deleted off the original and all rows moved up to fill in the gap. the rows all contain 2 formulas i'd like to keep specific to the row number Also it contains formulas id like to keep but change the cell numbers according to which row it is copied over to.
View 2 Replies View RelatedI have an excel file that contains data from bank transactions.
In column A at irregular intervals is a cell with " User Group:" It depends on how many transactions there are in a batch, could be 1 or up to say 200 as to when the next "User Group" cell is found.
After that also in column A is "Item" then "Lodgement Ref" then at the end "Batch Totals"
i.e.
User Group:
Item
Lodgement Ref
Batch Totals:
User Group:
Item
Lodgement Ref
Lodgement Ref
Lodgement Ref
Batch Totals:
I want to find each instance of "Item" then move that cell and every cell over to column CK down to and including "Batch Totals" i.e. A3401 to CK3410 to CM 3400 so it lines up with the top of the transaction block.
There are over 60,000 lines so it's worth trying to find a solution as I can then use the methodology to make other refinements in the spreadsheet.
VBA to find the next appropriate blank cell in column "A" when copying ranges of varying sizes and pasting them in a new worksheet one after the next.
Currently I have recorded a macro that uses the code below to get to this location, but I am worried this will break when I get new data of a different range size;
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select 'my initial range selection
Selection.Copy
Windows("myfile.csv").Activate
ActiveSheet.Paste
ActiveCell.SpecialCells(xlLastCell).Select 'finds last cell of my paste
Range("N69").Select 'I hit the down arrow once to get to new blank row
Selection.End(xlToLeft).Select 'to go to begining/col A of new row for next paste
I have tried playing around with
ActiveCell.Next
but can't get it to work.
I have 400 source files containing (among others) 8 sheets with daily results: "Fri 23", "Mon 26", "Tue 27", "Wed 28", "Thu 29", "Fri 30", "Sat 31 (if applicable)", "Mon 2".
Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
Need to move data from 14 sheets (1 pay period=14 days)(2 showing on attachment for example purposes) to time cards for each person (number of employees will vary).
Key data to move to the time card is the date of the hours, #Reg Hours, #OT hours, the ticket# and job# for those hours.(ie Chris Adams Aug 15, need Chris's Reg and OT hours (8 Reg and 2 OT) on his time sheet, and the corresponding ticket number and job number (in this case from I1, I2).
Unknown number of ticket/job numbers, but the pattern of cell entries will remain the same along the top of the date sheets.(starting at I1, then L1, O1, the next would be R1)
Unknown number of employees but they will continue filling down where the names are on the date sheets (column A). Each employee would have a time card sheet as well.
I'm trying to do is loop through a range of cells, and if the cell meets a condition I want to move it and 2 cells to the right of it left by one cell.
Sub MoveRangeOfCellsBasedOnCellCriteria()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("H2", Range("H65536").End(xlUp))
For Each cell In myrange
If IsNumeric(Left(cell.Value, 1)) _
Or Left(cell.Value, 5) = "UNIT " _
Or Left(cell.Value, 4) = "THE " _
Or Left(cell.Value, 5) = "FLAT " Then
Else
cell.Range("A1:C1").Select
Selection.Cut
cell.Offset(0, -1).Range("A1").Select
ActiveSheet.Paste
cell.Offset(1, 1).Range("A1").Select
End If
Next cell
End Sub