formula for when i select from the drop-down boxes it returns a value that i have placed next to it on a separate sheet. I have attached an example of what i am trying to accomplish
View 3 Replies
I have zero understanding of how to do VB. I am trying to create a risk assessment template where I have a ton of questions to which I want a column E impact drop-down selection of N/A, High, Medium, Low; a column F probability rating of the same. This SHOULD a result in the subsequent two columns result based on those selections.
For example, Column E selected as High and Column F selected as High should make Column G automatically display High and, ultimately, column H to display 100.
Here is where I am at for trying to get Column G's result though all I seem to be getting is a FALSE response to each state instead of the intended result.
=CONCATENATE(IF(E11="High"&F11="High","High"),IF(E11="High"&F11="Medium","Medium"),IF(E11="High"&F11="Low","Low"),IF(E11="Medium"&F11="High","Medium"),IF(E11="Medium"&F11="Medium","Medium"),IF(E11="Medium"&F11="Low","Low"),IF(E11="Low"&F11="High","Low"),IF(E11="Low"&F11="Medium","Low"),IF(E11="Low"&F11="Low","Low"),IF(E11="N/A"&F11="High","N/A"),IF(E11="N/A"&F11="Medium","N/A"),IF(E11="N/A"&F11="Low","N/A"),IF(E11="High"&F11="N/A","N/A"),IF(E11="Medium"&F11="N/A","N/A"),IF(E11="Low"&F11="N/A","N/A"),IF(E11="N/A"&F11="N/A","N/A"))
I have used the below formula which works in a standard cell, however I would like to have this is a VBA code using the Target.Offset option, however I can not get this to work. There may also be a better way of doing this.
The code is looking to see if the 1st cell (A118) is empty or not, if it is empty do nothing otherwise it then looks up the value in the 2nd cell (B118) and assigs the appropriate name from the range values.
VB:
=If(A118="","",LOOKUP(B118,{0,0;0,"";1,"Main Bank";71,"PFS";80,"Main Bank";106,"Dry Clean / Photo";112,"SCO";141,"Cafe";168,""}))
I have two columns in a spreadsheet that I want to use an IF function with. In the first column, I want a pick list containing 5 text options. Depending on which option is chosen, I want a number to auto-populate in the second column.
The numbers are important, because I want to repeat this pair of cells with slightly different text values in the second pair, and then to have a column that multiplies the two resulting numbers and conditional formats the result.
I am making a form with drop down boxes and auto fill to make things easier. I have one Box for the Company selection another box for the occupation selection and I need a formula to find a $ value based on the selections made in these two cells. If I could establish the actual cell reference of the selected data in the second drop down list. The data will be much larger than this example and will live on a separate sheet.
View 2 Replies View RelatedI am trying to take two random Mouse click selections and swap a set of ranges associated with the cells that are selected. For example if the user clicks on A1 it will resize(3,22) and store the selection as a variable to be swapped with another selection. Here is what I have so far but I keep getting a object required error on rngEmp1.
VB:
Sub SwapGroup()
If Selection.Cells.Count < 8 Then
MsgBox "Please Select two Groups to swap. Press and hold 'Ctrl' in between your selections", , "Swap Groups"
[Code] .....
sample.xlsmI am trying to create a sheet with dynamic lookup based on selections.
So if a user selects planning or costing and then the state then click on search then it cell B13 it should lookup from data sheet and give full state name and in cell C13 give the document name and in D13 give the print rule.
If in the data sheet the document type says planning/costing and there is no corresponding state to that document then it should be incliuded in all searches.
When I click clear then it resets the search. So if i select Planning and state as AL then the display should be
Alabama ABC DEF
A12 AA1 (aligned to previous row)
C12 AA3 (aligned to previous row)
E12 AA5 (aligned to previous row)
Also is it a better option to do planning and costing as a radio button or drop down list. Is there a way in the state selections to show the drop down list arrow at all times. Currently when the cell is not selected it disappears.
I have a very vast code with several subroutines based on selections from a userform.
I believe I have identified a loop that might be slowing down the process in the below:
Code:
Dim n As LongFor n = 23 To 65
If ThisWorkbook.Worksheets("record").Cells(ComboBox2.ListIndex + 3, n).Value = "INT" Then
UserForm2.ListBox2.AddItem ThisWorkbook.Worksheets("record").Cells(2, n).Value
End If
If ThisWorkbook.Worksheets("record").Cells(ComboBox2.ListIndex + 3, n).Value = "EXT" Then
[Code] ......
Basically the code will go through each value (that can be only of those four instances) and put the title inside a different listbox.
This works, but it seems to be maybe too "step by step" and direct? Is there a way for it to skip after it found the corresponding value to the next N without checking for a match with the other items?
I have been trying to put this together but am confused since I am new and this seems complex to me.
This is what I am trying to accomplish:
IE.
$F6 = 100
If $I6 is >1 AND $I7 is = 1 AND $I8 is =1 AND $I9 is =1 then $J6 =$F6
If $I6 is >1 AND $I7 >1 AND $I8 is =1 AND $I9 is =1 then $J6 =.5*$F6
If $I6 is >1 AND $I7 >1 AND $I8 >1 AND $I9 is =1 then $J6 =.33*$F6
If $I6 is >1 AND $I7 >1 AND $I8 >1 AND $I9 >1 then $J6 =.25*$F6
I am trying to divide a dollar amount equally between "Officers" if they were part of a transaction. By selecting the officers it would divide the total amount equally.
Is this even possible?
Iam trying to auto filter a data range based on criteria passed from a list box selections.I want the auto filter to be filtering column 2 of the data range based on ALL the items SELECTED from a multi-select list box (named listbox2) at the click of a button. Here is what i currently have:
VB:
Sub Cmd1_Click()
Application.ScreenUpdating = False
For i = 0 To ListBox2.ListCount - 1
If Me.ListBox2.Selected(i) Then
Range("A3:C600").AutoFilter Field:=2, Criteria1:=ListBox2.List(i), Operator:=xlFilterValues
[Code]...
It works, only that it filters the data by ONLY the last selected value of the list(i.e only one value item in the list). I want it to loop through ALL the selections, applying filter on column 2 based on EACH of the selections on the list box.
in cell A1 the user will select from a drop down list 5.50, 11,22, 33, 55. in cell B1 user selects from the drop down list a number 1 - 9. now in cell c1 I wont it to do some calculation based on the selections.
If b1=3, then A1*.20, if B1=2, then A1*.30, If B1=1, then A1*.50 and if B1 is greater then 3, post 0, if B1 is empty, then leave c1 empty.
Could anyone please help me frame a vb code for the below explanation?
I have a sheet where in some terms are provided. Users have to open this sheet and check its description. After going through all the terms, they have to select the required terms using a checkbox given beside these terms. After checking the reqd. boxes, they would click on 'Submit' at the end of the sheet.
Once Submit is clicked, a new excel workbook should open up with the selected terms as various column headers.
I am currently having trouble getting =IF forumla's to work, with more than 3 options AND an equation being taken into account. Attached, is an example of a spreadsheet, involving what I currently have, with Row 5 showing the formula's I've used, and rows 2-4 showing examples of 'Yes', 'No' and 'Equal' outcomes.
For Column E, I would like the value from the above cell (set to zero in the formula of the first cell) to:
-Go up 1 digit (from the above cell's value) for a Yes in that rows C cell
-Go down 1 digit (from the above cells value) for a No in that rows C cell
-Go up 2 digit (from the above cell's value) for a Equal in that rows C cell
As can also be seen from my example, I only have it working so that 'Yes' in C will take the value up by 1, and anything else (including 'No' and 'Equal') going down a point, which is only really using 2 options. I have tried numerous different possibilities for trying to get this to work, all of which gave me #VALUE error, or wouldn't even let me accept the formula. My current formula for what I have now (with only 2 options) is
=If(C5="Yes",E4+1, E1-1)
Basically, if possible, I would just like to make the E column change from 2 different ways (e.g +1 and -1) to 3+ different ways (e.g +1, +2 and -1).
I'm creating a new spreadsheet for different fines we have as a football club.
I have a table frozen at the top which looks like this:
Fine 1 Fine 2 Fine 3
Player 1
Player 2
Player 3
Then also I have a list below this with the date and specific fines:
Date Player Fine Amount
(drop down (drop down Entered manually
list of players) list of fines)
I am wanting the amount of the fine to be entered into the table at the top of the spreadsheet automatically based on the 2 drop down list entries. I would also need the table to keep adding the fines together once new entries are made.
i have 2 columns i want a formula that will test both cells at the same time for different possibilities:
First Column Second Column
IN Place 1
Not In Place -1
Part In Place 0
I need to check for all these possibilities and return a grade for it
Any other day but today (I've been starring at numbers too long) I could do this.
I need a simple formula that will return:
a. 3 if resut is >= $2.5M
b. 2 if over >= $0.5M
c. 1 if
I need to write a formula that will Display “Big Fish” if a customer is in the top 100 sales or ‘Not that great’ if the customer is not in the top 100 sales for the customer whose CUSTOMERID is equal to my ID.
An updated Spreadsheet can be found here
[url]
OR
[url]
I will enter a figure into A1. I will also enter a figure into C1. In E1 I would like to enter the lower of: 0.2% of A1 or 75% of C1
View 5 Replies View RelatedI need to review a 400,000 row spreadsheet and remove all records where 5 columns are populated with data so I am only eft with records that are missing information.
View 9 Replies View RelatedI am trying to create a formula that will do the following:
If A1 is between 95 and 99 then populate with 2
If A1 is between 90 and 94 then populate with 3
If A1 is between 85 and 89 then populate with 4
If A1 is between 80 and 84 then populate with 5
If A1 is below 80 then populate with 6
1) I have an invoice form, and need to create a formula that will allow me to calculate a discount IF an item number begins with "C" or "CE".
Example: Item # is in cell F12. (may or may not begin with "C" or "CE")
Item price is in cell J12.
Extended price (qty x price) is in cell K12.
In L12, I need to calculate a discount (from % in fixed cell L9) on the figure in K12 - based on whether or not the Item # in F12 begins with a C or CE.
If it does not begin with C or CE, then L12 needs to equal 100% of K12.
(The 2 parameters I referred to in the title were:
C, followed by a number
CE followed by a number )
2) The biggest part of the dilemma is that the person using this spreadsheet is totally unfamiliar with Excel formulas, spreadsheets in general, and has to send this finished product to a client each week. So I need this to be as simple as possible - which seems to me to be a formula (that can be copied to insert rows, etc. if necessary).
I am trying to work out a formula to return a sum based on 2 variable, but one of the variables in in a column and one in a row, anyway I can do this?
I don't want a normal sumif returning the relevant column as the relevant column will change based on a cell that can change.
I basically have a list of products sold (products listed down the page) by month (month listed across the page), I want to sum all the products in a particular month on a separate tab (both product and month can be changed).
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
I have two combo boxes that both contain 7-12 separate search criteria for the user to choose from. The other includes months and the other value ranges in text form. Based on the selections, e.g. "August" from other and "increased by more than 5 %" from other, I'd like to have a command button to execute the appropriate macro. I've already compiled the macros for each occasion but I just can't figure out how to get the button to execute them. Can I use the Select Case statements? If so, how?
Oh, and whether it's relevant or not, the boxes and the button are from the control toolbar.
i am attaching a sheet here.
i have put data validation list in three columns
from data lsts i select unit type , then hinge type then code.... the problem is that as soon as i select code all the values (H W D ) in the next three cells should automatically change.
the values against each cabinet code are also provided in the same sheet.
Sr No.
Unit Type
Unit Type
Code
H
W
D
Qty
1
Base Unit
Double Hinged Door
B60
720
600
580
2
2
Base Unit
Single Hinged Door
B30R
720
300
580
4
I have lot codes in which the first 2 digits represent the year.
9801585623643 would be 1998
01143143143 would be 2001
00103431431343 would be 2000 etc.
I am trying to find out how to create a formula to return the correct year in 4 digit format.
I have tried a few different things combining length, left and year functions but cannot get the appropriate result.
Trying to write a formula that looks for the first number in the same row, then returns the value in that column in a different row. In the example included, cell A-7 should contain the formula. Within row 7, determine the column where the first number is listed (column D in this case), then return the value listed in row 3 of that column ('C' in this case).
I've tried Lookup, Index, and Match functions, but can't seem to get the right combination.
I have a spreadsheet that give me the percentage difference of two cell say a1 and a2 (=a2/a1)[format as % two decimal places]. The result is on say b5 as a %[format as % two decimal places]. Now on B6 I want to do this:
if B5 is >3.01% then b6 =" Market Test Required"
if B5 is +3% then b6 =110
if B5 is +2% then b6 =106
if B5 is +1% then b6 =103
if B5 is 0% then b6 =100
if B5 is -1% then b6 =96
if B5 is -2% then b6 =93
if B5 is -3% then b6 =90
if B5 is >-3.01% then b6 ="Market Test Required"
So on and so on.... I would really appreciate your help on this issue.
I have used excel for some time now but not with complex formulas or any vb.
This is to manage which departments (approxiamately 30) within a business need which compulsary training (approximately 11 courses)
Spreadsheet currently reads list of new employees and I want to be able to have "YES" or "No" values under the different courses
Is there a formula/function that i can use (like the IF Formula) to complete the following information;
EG: =IF(OR(A3=H2, A3=H5 etc... ), "YES", "NO"
Column H lists all departments
Column A lists deaprtments
A3 representing the 1st Department needing training
I need to build a formula to have one cell display multiple options depending on a value in another box.
If Value is >x and <x display Y
Details:
Cell D5 Holds a dollar amount. E5 is where the calculation will happen. Logically i need it to do the following exactly:
If D5 is between 5000 and 9999, display 75. If D5 is between 10000 and 14999 display 150. If D5 is between 15000 and 19999 display 200. If D5 is >20000 display 250.
