I am trying to create a formula that will do the following:
If A1 is between 95 and 99 then populate with 2
If A1 is between 90 and 94 then populate with 3
If A1 is between 85 and 89 then populate with 4
If A1 is between 80 and 84 then populate with 5
If A1 is below 80 then populate with 6
I am trying to put together a calculation sheet for court costs and I need a cell to return a value based on the amount entered in another cell. For example, if I input a value between 1 and 5 in cell A1, I would like "Cat" to appear in cell A2. However, if I input a value between 6 and 10 in cell A1, I would like "Dog" to appear in cell A2. Is this something that can be done without VB?
For the real spreadsheet, I would need the following outputs in cell A2 based on the respective ranges in cell A1:
Output to A2 = $405 if input to A1 is < $50,000.
Output to A2 = $905 if input to A1 is ≥ $50,000 and < $250,000
Output to A2 = $1,905 if input to A1 is ≥ $250,000
I am looking to select two values from a range based upon their relationship to the maximum value. In this specific case I am trying to calculate the Quality factor based upon the frequency response of a transducer. So I need to identify the Maximum impedance and its corresponding frequency. I also need to identify the 3db points either side of the maximum impedance.
The 3db points are found at 2/3rds of the maximum value of the impedance (Impedance Mag in attached spreadsheet). Calculating the first 3db point isn't overly difficult as I just calculate the value for the 3db point and use the MATCH function to find the closest Impedance value and then work out the corresponding frequency from that. I am stumped as to how to calculate the second 3db point (above the Max impedance value). I have attached a spreadsheet with frequency information in column A, the other columns are used to derive the values found in columns M (Impedance Mag) and N.
I have a spreadsheet that give me the percentage difference of two cell say a1 and a2 (=a2/a1)[format as % two decimal places]. The result is on say b5 as a %[format as % two decimal places]. Now on B6 I want to do this:
if B5 is >3.01% then b6 =" Market Test Required"
if B5 is +3% then b6 =110
if B5 is +2% then b6 =106
if B5 is +1% then b6 =103
if B5 is 0% then b6 =100
if B5 is -1% then b6 =96
if B5 is -2% then b6 =93
if B5 is -3% then b6 =90
if B5 is >-3.01% then b6 ="Market Test Required"
So on and so on.... I would really appreciate your help on this issue.
I have used excel for some time now but not with complex formulas or any vb.
I can manage an array formula that returns a value based on a criteria. Simple. But I want to add in an additional couple of criteria. Now I'm stuck....
My sheet looks at a manually entered postcode, finds out what region this is in, and returns a list of postcode I have defined as being in that region. (So the postcode WF1 3JY would return a region of Yorkshire, and list postcodes of WF, BD, L, etc)
I also have a list of engineers, with a column for their home postcode.I want to be able to list all the engineers from my list whose home postcode matches any of the values on the already created list from the postcode and region entered. So far I have this, which finds me all the engineers for just one postcode area.
I would like to be able to use the Vlookup function to return more then one value as a result of the criteria. I have a cloumn of dates that populates the X axis of a gantt chart with data whilst the Y axis will be populated by a site reference resulting in a program of work, the Y axis data is the result of a vlookup function. My difficulty arises however with multiple sites, for instance where two or three sites will be visited on the same day. The vlookup function will only return the first value it finds in a range to the formulated cell. The result being a missing site(s) from the gantt chart / work program. is it possible to return all values to a cell i.e. site1, site2, site3. using a vlookup or do i need to use another method of doing this?
View 2 Replies View RelatedI have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered – so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
I would like a formula to add up values in Col E based on a range of account numbers in Col C
For eg adding up Sales values in Col E based on Account number being series 3000-3015 in Col C (this particular series must exclude numbers ending in an alpha). I also have account numbers ending in an Alpha where I need to add up the values pertaining to these for eg 3000D-3015D, 3000K-3015K etc.
I was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.
My
Public Function SortRange(rngToSort As Range, valCol As Integer)
Dim Swapper As Variant
Dim i As Integer, _
j As Integer, _
k As Integer
For i = 1 To rngToSort.Rows.Count
For j = 1 To rngToSort.Rows.Count - i
If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then
For k = 1 To rngToSort.Columns.Count
Swapper = rngToSort(j, k)
rngToSort(j, k) = rngToSort(j + 1, k)
rngToSort(j + 1, k) = Swapper
Next k
End If
Next j
Next i
SortRange = rngToSort
End Function
I need a formula that will return the minimum value from a column range that flexs without having to manually go in an change row references. There is a blank row between each section of data in order to separate info. As an example:....
Need to formula to flex to include rows 5 thru 7 in the first section but expand to include rows 9 thru 13 in the second section. =MIN(A5.A7) works but how do I get next section to flex to =MIN(A9.A13) without manually changing the cell references? There is always a blank row in between the sections to separate.
I have been creating a schedule on excel, the schedule includes a top row which has the following headings Date, Agent_ID, title, agent_name, 07:00, 07:15, 07:30, etc up until 21:45
The columns that are named with times are times that indicate a break time.
The column named title is the actual shift time, eg 08:00 - 17:00.
I need a formula that would look at my source data, and populate a sheet in the following layout
agent_id, agent_name, title, start_time, end_time
The title be one of the following:
Shift 08:00 - 17:00
Tea Break 10:00 - 10:15
Lunch Break 12:00 - 12:30
Tea Break 14:15 - 14:30
If I need to have the shift portion and the break portion appear on separate tabs that would also be ok, but ultimately I need to keep my original source as is, but the change it to be able to upload it into a MySQL database.
I have created a drop down list of various material sizes what I am needing to do is to select a material size from the drop down list and a corresponding value is input into the cell. So on say sheet two (Data Sheet) I have Cell A1 25x25 with Cell B1 100, Cell A2 30x30 with Cell B2 120 and so on. On sheet 1 Cell A1 has my drop down list being the material size ie 25x25, so what I need to happen is if I select 25x25 then Cell B1 is 100 or if I select 30x30 then cell B1 is 120.
View 4 Replies View RelatedI'm trying to return 2 values from a table selection, based on a value i.e. if I look up the table for "Team 1" - i'd like to return Team 1 v Team 6, Team 9 v Team 1, and so on, to a Fixtures Section in a different area of my Excel Sheet.
However, the look up value "Team 1" could be in column J or N. I've tried Index, Match, VLookup, IF statements etc....
See below:
J
K
L
M
N
[Code].....
how to return values based on some conditions.
So for the sake of this example i have two cells lets call them J1 & J2 , one with the client name and another with State (matches the table name)
How can i get it so when i type in say Client 1 & Table 3 it will return the information in client 1s column into table 1s rate column. Obviously i want to be able to type in any clients name / table and have the same thing happen.
the red is what i want returned into table 1s rate column
Table 1
Table 1
Table 2
Table 2
[Code].....
I have in A1 a string of 100 characters..
I would like to create a SELECT CASE where,
if in A1 there is the word "BLACK" , put 1 in A10
if in A1 there is the word "WHITE", put 2 in A10
else put 50 in A10
I'm trying to use the instruction INSTR but with negative results..
(I have many cases other than BLACK and WHITE, that's why I need a SELECT CASE)
I am currently looking at the workings of a spreadsheet designed by someone else.
First of all i need to know,how these combo boxes are created in the attached sheet,because it cant be edited.in addition to tht in the coloured cell (F17)i'm trying to dereive a formula which is,if (C17 = doll "1"),but its not working.Please someone give me a solution.
I have the following formula: =IF(C319<=300,9,IF(AND(C319>300,C319<500,6.75),IF(C319>500,6))) It returns 9 if C319<=300 but returns FALSE for all other numbers. I want the funtion to return 9 If <=300 and 6.75 if C319 is greater than 300 but <=500 and if it greater than 500 it should return 6.
View 5 Replies View RelatedI am trying to learn more about functions like IF(), AND() MATCH() and LOOKUP()... but so far I cant seem to get it right. I am actually trying to get a simple working formula that can take a value from the first tab and cross reference it with a table in the second tab to return another value in the first tab.
For example....
On the first tab/sheet named "Details", i have a list of people, an area of work they fall in and then a column named region that categorizes their areas of work into groups
A
B
C
1
Name
Area of Work
Region
2
Mr A
J
?
3
Mr B
6
?
4
Mr D
Z
?
5
Mr E
18
?
Then on the next tab/sheet named "Category", I have a table which lists the areas that belong to a region;
A
B
1
Region
Area
2
1
A-J. 1-6
3
2
K-P, 7-15
4
3
Q-U,W,Z,16-20
I have tried formulas like IF(AND(B2=Category.B2),"1","ERROR") but it keeps returning me "ERROR" when it should return "1"
I have a workbook that has rows of data starting at A5:G5 seperated in groups of 25 rows.
Example: A5 is numbered 1 and A6 is 2 A7 is 3 and so on to 25 then skip a row and start numbering again to 25.
What this is for is employees are placed in groups of 25 to be eligible for an award for safety.
What I want to do is Range G5:G650 is to be a place where an "X" is placed beside an employee who has had an accident then Range H5:H650 would return "Employee had an accident" I already have this part working.
Then I want to code a subroutine that would search for the "X's" and return the entire row data for each name in that group of 25 on a seperate worksheet.
This would then be printed so we would know which group's to exclude.
I know how to make it return the row of data containing the "X" but how can I make it grab the entire group?
There will be multiple groups of 25 each and each time an "X" is found within a group create a new worksheet for that group.
650 employees / 25 = 26 groups
I need to know how to read all the criteria1 brought by the autofilter (in the dropdown box) from one column one by one and then print the table. Is that possible? I've read that it's hard but never read how to do that.
View 4 Replies View Relatedfind attached my spreadsheet. I want the excel to look at j2.. search for it in A coloumn and return its corresponding B coloumn values. There might me multiple values with the same name in A2. I would like the excel to return all the multiple values with their corresponding B coloumn values.
View 3 Replies View RelatedEach row in Table 1 represents an "Expanded" array formula.
In Table 2 I have a "Running" formula to return progressive max values working Left to right.
My question is, can this be written as an array?
Returning something on these lines ...
{(IF(B1="","",MAX($B1:B1))),(IF(C1="","",MAX($B1:C1))),(IF(D1="","",MAX($B1:D1))),(IF(E1="","",MAX($B1:E1))), etc.}
Drag B7 across and down to see what the array should contain for each row in Table 1
Sheet1 Â ABCDEFGHIJKLMN1Table
1Â Â Â 1234Â Â Â Â Â 42Â 141Â Â 5Â 3Â Â Â Â 53Â 1Â 46Â 423Â Â Â Â 64Â 122Â 4567Â Â 89105Â 122Â 4657Â Â 89106Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7Table
2Â Â Â 1234Â Â Â Â Â 48Â 144Â Â 5Â 5Â Â Â Â 59Â 1Â 46Â 666Â Â Â Â 610Â 122Â 4567Â Â 891011Â 122Â 4667Â Â 8910Spreadsheet
FormulasCellFormulaB7=IF(B1="","",MAX($B1:B1))
as an example, i have a column of data that includes cells with blank and non-blank values...i want to write a formula that will refer to this column and list the non-blank values - either in one cell or separate cells.
View 9 Replies View RelatedI've got a complicated logic formula which looks at multiple values on a large spreadsheet to return a singular figure based on whether all these conditions are met. It works well but I wan't to add an extra stipulation to it. I won't paste the full formula as it probably wont mean much without all the data so heres a mini version with simplifed conditions - but that DOESNT work:
=SUMIF(K10:K13,IF(H10="CAT","CAT",IF(H10="DOG","DOG",IF(H10="ALL",OR("CAT","DOG"),""))),L10:L13)
Its the last bit that I'm having problems with - I want to say if H10 equals "ALL" then in my table of values to add up not just "DOG" values or "CAT" values but "DOG" and "CAT" values
I would like Excel to return me a value based on many criterias in the same worksheet.
E.g
A
B
C
[Code].....
QN: For any of the value from Col B to Col N, i want the result of Column A appearing in my cell.
Here is a sample of database,
A
1
Jan-12
2
Feb-12
3
Mar-12
4
Apr-12
5
May-12
6
Jun-12
7
Jul-12
8
Aug-12
9
Sep-12
10
Oct-12
11
Nov-12
12
Dec-12
If i lookup a value in the range A1:A12, say Sep-12, i need to get the cell address instead of the value of the row. but i know how to get cell address using CELL function. but i need to get cell address when i lookup the value.because lookup value will be dynamic.
I am trying to use a formula similar to VLOOKUP() to look in a table for two values and if both values are found, return another value.
Sheet2 is an example of my output file, sheet one is a generated file. i would like the vlookup formula in sheet 2 cell D2 and down to be something like this,
=VLOOKUP(A2,Sheet1!A:K,10)
But I would like to lookup A2 and B2, and the row that contains both values, return the value in the J column
I'm trying to use vlookup to return multiple values for the same unique identifier. I've read a couple of examples within the forums, but I haven't been able to find anything I understand. I have employee ID's and these ID's have specific access associated with their ID's and each access is listed within a different row. Within a new spreadsheet I removed all duplicates of the employee ID so now I no longer have a one to one match between spreadsheets, so I would like to create a vlookup that will list all access associated with each employee ID. I have attached a sample of the data sheet I am working with.
View 5 Replies View RelatedI basically have this worksheet which has Cell D3 Being Dynamic. It puts the lowest cost supplier from columns H:W. If i change the prices in H:W it will bring up the lowest cost supplier in D3. Once D3 is chosen i want it to self populate F3 and G3 based off of what is in D3. This data should be pulled off from what is in the H:W columnns corresponding to the supplier in D3.
View 3 Replies View RelatedColumn A:
pants A green
Pants B red
Jacket C green
Jacket D blue
Polo C white
....
I need a formula to find some value( in our case "colors" = "green, red, blue, white" ... = 20-30 values), and to return in column B, the values, like:
Column A: Column B:
pants A green | green
Pants B red | red
Modern green Jacket | green
blue winter jacket | blue
Polo white D | white
I have different product feeds (csv) and i will like to search for colors in the product names.