Formula To Capture Data In Cells That Are After It
Aug 12, 2009
I have a moving average spreadsheet that I am having trouble with. In column F of 'Data for Pivot' Tab, I have a set of data that doesn't begin populating until 101 data points (cell C8 in 'Mov_Avg_Chart' is the input; in this cell F138 of 'Data for Pivot' tab) after data begins populating in Column E of 'Data for Pivot' Tab (in this case data begins populating in Column E in row 38).
What I would like to do is have the data in cells F38 to F137 = the value in cell F138. From there on forward (cells F138 and onwards), I would like the formula to calculate data in the same way as it is currently calculating it. That is, I would like the values in cells F38 to F137 be 0.00110 (in the current example). However, the data will be constantly changing. Thus, sometimes the data in column F will begin at a different cell than cell F138. In essence, I want the formula: when column E begins populating data but column F has not, I want those column F values to equal the value of the first populated value in column F (which is usually numerous cells below this value).
I just can't seem to get this one right after spending considerable time on it. I would appreciate any help you can give on this.
View 10 Replies
ADVERTISEMENT
Apr 2, 2014
I have attached the the excel sheet where in i want to calculate the total number of completed data points for one person.
Let's say "Wasim" would have completed 7 tasks and would updated the relevant cell as Completed.
Now in a huge data list How will i find "Wasim" and how do i calculate how many he has completed.
I believe Pivot table would be the answer here but is there any formula which would replace the pivot table?
(Please see the attachment) Example.xlsx
View 2 Replies
View Related
Feb 27, 2007
I would like a formula to capture all values >=50 to <=99 in a row.
View 14 Replies
View Related
Nov 30, 2009
I have a spreadsheet that has two tabs that show different views of my report. In tab "Team View" I'd like to capture the information that is in "Cost Centre View" in the fields Nov09 to Oct10.
I want my formula in "Team View" tab to take the TOTAL "Run Rate Reduction" value in "Cost Centre View" ONLY and have the same "Initiative Type" in "Cost Centre View" that align to what is shown in "Team View" in column A (i.e. ISO).
I tried using a SUMPRODUCT but my formula didn't work.
Is there another formula that will give me this calculation?
View 14 Replies
View Related
Apr 4, 2008
How do I capture a formula from a cell? I want to create a macro that takes each reference (let's say 'B4') and changes it to if(B4=0,0,B4).
View 8 Replies
View Related
Feb 15, 2007
I have a workbook with several sheets , the 1st 31 being named Mar.01-07, Mar.02-07,etc
I'd like to capture the averages(of cells with values) from cells B7:C24 of sheets Mar.01-07 thru Mar.31-07 and place the values in the sheet called "averages" with the average for B7 going to cell B7 in the "average " sheet, B8's average going to cell B8 in the "average" sheet and so on.
View 9 Replies
View Related
Oct 9, 2009
There is 2 parts to my question and I will explain them as best as i can.
1. I have a front sheet and 12 other sheets ( 1 for each month of the year) they all have the same layout. On my front sheet I want to create a button which will capture the sheet onto my front sheet for the current month, whether this means to make 12 buttons to choose which month is displayed on the front sheet or one that detects the date by system time i dont mind.
2. These 12 sheets will ideally be hidden and what I am wanting is again, on the front sheet 12 buttons for each sheet to bring up the corresponding hidden sheet so they can be viewed, and then on each of the 12 sheets another button which will hide them and return the user to the front sheet.
View 10 Replies
View Related
Oct 6, 2007
I have streaming data coming into my excel spreadsheet. The data is in 1 cell and its a number that changes almost every second. How can I capture and store this data.
View 1 Replies
View Related
Jan 24, 2007
I need to find a term "aa" and upon finding this term, the term on the right must be "bb" before we capture the number. Output will be 15 for this case.
Note that we do not know which cell "aa" will occur in, but the term "bb" will always be on the right of "aa". Can anybody help me with this? I have attached an example for your reference. Hopfully by modifying the below code, i can get the value i desired.
Sub test2()
Dim xx As Variant
Set rng = Cells.Find(What:="aa" , After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
True)
If Not rng Is Nothing Then xx = rng.Offset(0, 3).Value
MsgBox xx
If rng Is Nothing Then xx = 0
MsgBox xx
End Sub
View 8 Replies
View Related
Jul 10, 2014
I have an excel file with column stating month and rows are phases ... for each Phases we add the revenue numbers by month and it does keep changes as and when scope changes. However, i am finding it difficult to capture the changes ... is there a way i can set the guidelines to ensure all historical data changes as and when any updates and it should store the historic inputs for consolidation ... i would like to be called as Baseline, Re-baseline1, Re-beseline2 like wise.
Sample attached : sample_auditing.xlsx‎
View 13 Replies
View Related
Nov 20, 2007
how data capturing works, using controls. I try to explain what I mean. I have a userform with a combobox that allows to select data from a worksheet in another workbook (database). Using VBA, I'm asked to define the "source" for the combobox. I don't understand the difference between controlsource and row source because when I close the userform, I find only the first field filled in (column "A"), while I would like the entire row to be copied.I also would like to have an "ok" button to allow me for multiple selection. In other words:
I select the desired data from the combobox
I click on the "ok" button ahd this event should copy the data (entire row) selected via the combobox on my worksheet without closing the userform in order to allow me to select other data on the same session. The row to copy data into is selected using the firstemptyrow method..
View 4 Replies
View Related
Oct 2, 2008
Trying to capture data from specific fields (which are populated with live data collected elsewhere) into new fields based on date. Ex:
A1 - A4 have "totals" derived from an external source, and the fluctuate daily.
I want to take today's totals and drop them into D1 - D4. Tomorrow, I want totals dumped into E1 - E4, the next day they go into F 1- F4, and so on... in other words, I'm tracking daily totals over time.
I've started with a macro that I would attach to BeforeSave as follows--
View 2 Replies
View Related
Oct 22, 2009
find the attached file. Book 2 there is 4 columns ie,reg no,fleet no,product & model and on book 1 there is fleet no,reg no and model and what i need is to capture fleet no & model from Book 1.
View 2 Replies
View Related
May 22, 2007
I'm trying to do is definetly simple to a lot of you, but I'm struggling on how to get started. I attached a workbook that clearly shows my work! I'm almost there but not quiet. Basically the user will be able to make a slection that will be used to lookup values from a different sheet. Each selection triggers a ranking number at the bottom (red pattern) in the worksheet. Now I would like to capture all scenarios and display the ranking.
View 4 Replies
View Related
May 29, 2008
In the Data tab under Connection Properties, I have "Refresh every x minutes" checked. Question is how do I capture in a cell within a sheet the last time it was refreshed?
View 2 Replies
View Related
Jul 21, 2014
I have a requirements to capture the data and calculate the qty based on the defined work week. How to to this in vba macro or a formulas. I'll giving a sample data as reference. In my sample data i have already the formulas
but i wanted to automate the work week calculation specially if the number of days in a month has been change.
Btw, the values of every column is came from other worksheet. i copy paste this data as my sample.
For ex : Today is July and it has 31 days, the 31 days will be distributed to the defined workweek and calculate the contents of the corresponding column.
here is the distribution of columns per week as reference.
(31 days)
wk1 - Day1 to Day8 (8 colums)
wk2 - Day9 to Day16 (8 colums)
wk3 - Day17 to Day24 (8)
wk4 - Day25 to day 31 (7) columns
(30 days)
wk1 - Day1 to Day8 (8 colums)
wk2 - Day9 to Day16 (8 colums)
wk3 - Day17 to Day23 (7)
wk4 - Day23 to day 30 (7) columns
View 1 Replies
View Related
Oct 5, 2006
I have a program running on my computer called Orbits.
What Orbits does is monitor a race track, and via a transponder in each race car, when a race car crosses the start/finish line Orbits will record that infomation.
The orbits program continually feeds data out the port 50000.
I can start hyper-terminal (yes the free one that comes with windows) and create a link the the computer running orbits. I use IP and port (Ex. 10.0.0.1 and port 50000).
As the race is going on I can see the data in hyperterminal: Below is a sample.
$F,9999,"00:00:00","19:52:40","02:09:14","Green "
$F,9999,"00:00:00","19:52:41","02:09:15","Green "
$F,9999,"00:00:00","19:52:42","02:09:16","Green "
$F,9999,"00:00:00","19:52:43","02:09:17","Green "
What I would like to do Is to get this data LIVE into excel, as the race is going on.
I have no idea of to get this data into Excel since It is not saving it as a file.
View 9 Replies
View Related
Dec 22, 2011
I try this method but data entry not allowed
Here is a scenario to protect
formula cells but allow access to data cells:
. Select all cells in the worksheet by clicking on the top left corner of the sheet.
. On the Format menu Click Cells.
. Click on the Protection tab.
. Uncheck the Locked and
Hidden check boxes, then click OK.
These four steps will make all cells in the worksheet unprotected and can therefor be modified. Next step is to
protect the formula cells, and here is how we do it:
. Select all cells that have formulas.
. On the Format menu Click Cells.
. Click on the Protection tab.
. Check the Locked and Hidden check boxes, then click OK.
. On the Tools menu click
Protection and select Protect sheet
View 7 Replies
View Related
Apr 18, 2014
i am in need of the following.
A B C
9.30am 120 120
9.31am 119.9
9.32am 119.8
9.33am 121
9.34am 120.9
9.35am 120.8 120.8
Here A and B value is keep on changing from external source, when A1=9.30am, the B1 value 120, then C1 should capture the B1 value and stored in it. like wise it captured and stored for every 5 minit or as per requirement.
View 9 Replies
View Related
Aug 7, 2007
I am using the following code to browse to a CSV file and import it into my current workbook. How can I “capture” the name of the text file (myFile) for future use?
myFile = Application.GetOpenFilename("All Files,*.csv")
If myFile = False Then
Exit Sub
End If
' Open file
With ActiveSheet.QueryTables.Add(Connection:="TEXT;" & myFile, Destination:=Range("A1"))
.Name = "DATA"
.FieldNames = True...............
View 9 Replies
View Related
Feb 6, 2009
Is there a way to nest IF & And statements. I'm looking to concatenate a number of cells and seperate them with a space and/or comma but only if they contain data so need something along the lines of
View 3 Replies
View Related
Dec 12, 2011
I have a code that paste my data into a new row.
At the same row I have a column with formulas, and I would like the macro to copy that formula into same column in next row.
Code:
LstRow = Bilag1.Range("C65536").End(xlUp).Row + 1
Bilag1.Cells(LstRow, "B") = Brreg.Range("B4").Value
Bilag1.Cells(LstRow, "A") = Brreg.Range("B5").Value
Bilag1.Cells(LstRow, "C") = Userform1.txtProjectNo.Value
This is what I have, and my formula is in column "D".
View 4 Replies
View Related
Sep 9, 2009
I have a table that automatically gets populated each month via VLOOKUP.
There are about 14 columns and anywhere from 80 to 130 rows.
At the bottom of each column I SUM the total for the column.
Because I never know how many rows will get populated I have my VLOOKUP formula go down about 180 rows, then I SUM at the 183 row. But because the formula returns N/A on all of the rows that do not have data my SUM in row 184 returns N/A. This means the end-user has to go back in and delete all of the rows that have N/A. I don't want them to have to do this. Is there anyway to format the cells so that this does not happen?
View 9 Replies
View Related
Apr 23, 2014
I am trying to have my spreadsheet pull data from one tab and cell if they match another.
Tab "Ag Orders" column H, I enter data in lets say cell H37. Whatever I enter, if it matches tab "reference List" C:C, then "ag orders" column G (specifically G37) should enter the data in "reference List" D:D
So since in H37 I entered 34000 - 314620, G37 should pull in Farm Operations since on the referene list tab that string of numbers (C11 matches up with D11)
a little confusing but I hope it makes sense.
13-14 budget-AG.xlsm
This isn't the exact formula I used but something like it and it wasn't working. It wouldn't match the data up correctly on a few of the department names
=IFERROR(LOOKUP(H35,("11000 - 311010","11000 - 311020","11000 - 311510","11000 - 311610","11000 - 312010","17800 - 311010","17800 - 311510","17800 - 312010","34000 - 314610","34000 - 314620","34000 - 314640","34000 - 314660","34000 - 314680","34000 - 314690","81008 - 840008","81009 - 840009","13863 - 312040","13864 - 312050","71060 - 521620"),
[Code] ..........
View 1 Replies
View Related
Oct 13, 2009
I am trying to conditionally format some data in cells A3:A6 (shade the cells) depending on whether a number in B1 is 1 (green), 2 or 3 (blue), or 4 (red).
View 3 Replies
View Related
May 6, 2013
I have attached a spreadsheet that is causing me difficulty. I currently have a formula that is displaying in V3 the highest grade when it looks up the data in A3,H3 & O3. Then this is repeated for W3 when the data is looked up in B3, I3 & P3 etc etc... BUT
I need the formula to work if only block one is complete i.e. (1 Explore grade, 1 Plan Grade, 1 Make Grade etc).(please see the example to understand what is meant by a block)
The current formulae will only display a grade if all cells are complete i.e., A3,H3 & O3.
So I am looking for the formula to:
If A3 has a grade in it I wish V3 to display it because its the only grade. (even if H3 & O3 are blank)
As and when H3 has a grade filled in I want the formula to select the highest and display it in V3 (again even if O3 is blank)
As and when A3, H3 & O3 has a grade in it I wish the formula to lookup and display the highest in V3
Ans this repeated for all different areas, Explore, Plan, Make etc.
example doc with formula.xlsx
View 1 Replies
View Related
Sep 8, 2012
I am attempting to use concatenate to combine two cells of data, but to only display the information if both cells contain information.
Currently using the following simple formula:
=concatenate(a1,a2)
However, I only want it to work if both a1 and a2 cells contain data. If only a1 contains information, but a2 is blank, I want it to calculate a blank cell.
View 3 Replies
View Related
Jul 12, 2007
formula to calculate how many cells in a column contain data of any kind. The data might be a number, a word, or even a symbol, such as "):>:)" for example. The range will change from time to time. For example, one day it might be a2:a4956. A few days from now I might delete a few rows from the top, such as rows 2 through 26, so then the range would be a2:a4931. Then I might add rows at the bottom with data that I need to be counted. I dont want to have to change the formula evertime I add or delete rows with data. I do not want the formula to count a blank space created by the space bar as "data." One formula I used sorta worked, but if the cell appeared empty, but had been cleard out by pressing the space bar instead of the delete key, the formula counted it as a cell with data.
View 9 Replies
View Related
Feb 25, 2004
What I mean is, I have a formula that sums a specific cell across several tabs.
=sum('120:125'!C15)
Lets say that this formula resides in a summary sheet. And that the summary sheet is definable by a control in another sheet (user friendly).
So in the user friendly sheet, a user toggles to 'Assets'. In the Summary sheet, Assets appears in cell a1, there is a lookup table somewhere, and a lookup value of 120 appears in cell a2.
I want the formula above to adjust for cell a2.
If a2 = 115, then the formula should adjust to
=sum('115:125'!C15)
Of course after I understand how to do this, I can do the same with the end of the sheet range and the cell ref.
View 9 Replies
View Related
Jul 1, 2014
I have some cells that are summed with total cost.... now i need to sort the totaled cells? How do i sort a cell that has a formula based on multiple other cells?
View 2 Replies
View Related
