I am looking for a formula that will add some numbers for me on different sheets based on a sorted option that I choose on my Summary tab. sample survey (1).xlsx Here is a sample workbook with what I am looking for.
View 3 RepliesNew to using Excel formula's and am trying to create an IF/LOOKUP formula to look at multiple sheets within a workbook and display the information within the 'compare' sheet.The yellow cells are where data will be entered.
What I am trying to achieve:
Type the store numbers on the compare sheet (B2 and D2). For the sheet attached I have put 190 (in B2) and 2012 (in D2)
B2 store shows the predicted and actual values of 190 in columns B & C
D2 store shows the predicted and actual values of 2012 in columns E & F
(No need to worry about variance and difference columns)
So, if I change the store numbers in B2 and D2 to any of the sheet numbers, I want it to display the correct info for that particular store within the compare sheet.
I have attempted a formula, which you can see... I have basically looked at some previous sheets that had IF and LOOKUP on it and tried to replicate that for my sheet, but with no luck.
In my workbook I have multiple sheets but I'm attaching a very simple workbook to demonstrate what I'm trying to accomplish. In my "Lookup" tab/sheet. I want to have known Latitude and Longitude data that will exist in columns A&B. Columns C & D will have address numbers and Street Name. I would like my lookup formula to find the longitude and latitude data from my "lookup" sheet, when the matching address information is typed in, in my 2009 sheet. I have to keep the street numerics and street name separate on this worksheet as well. I believe I'll need two separate lookup formulas as I need these formulas to start in cell G4 & H4 in my "GeoCoding1" sheet. Is it possible to have four columns of data to be viewed in a lookup formula? I tried this formula in cell G4 (GeoCoding1 sheet)
View 3 Replies View RelatedI have all my data on sheet 2 which contains tables that relate to information on regions, manufacturers, etc so it can be a large amount of tables which will change from month to month depending on a monthly list.
For example, if “Region 1” is in cell B134 – the resulting data I need to pull out will be contained in C138:G232 ...or ”Region 2” which is in B235 – table info is in C239:G333, etc, etc.
On sheet 1, I have a cell (L7) that is populated by another formula. This cell is effectively my lookup to pull out information from sheet2 to populate cells in (sheet1) AE119:AH212 - same sheet as the reference (L7).
I need to look up the reference/resulting value that is in L7 on sheet1, find and match against the values in column B on sheet 2 and then pull in the corresponding table information.
If the value in L7 was not changing at all I could do.. in cell AE119… =OFFSET(sheet2!B134,4,1,1,1) etc etc
... but I am at a loss as to the value in L7 changing and incorporating a lookup… or maybe I am looking at it wrong..?
I have looked up match, offset, index and lookups on the forum and have managed to confuse myself even more. I have even tried taking some of the example formulas and amending with my references but to no avail.
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
I am trying to do what I thought was a simple look-up. On one sheet in colum A I have some text and in colum B I have a number. On a second sheet i have a list of text that may or may not match the text on the first sheet in colum A. If the text in colum A matches one of the text items in the list, I want to have the value in colum B appear next to it in colum C. I tried to modify a vlookup formula but would only get a value error if there was a match.
View 3 Replies View RelatedAttached you will find the spreadshhet in question. If you click on the click here button input the following info:
8.0
3508949
80
0
0
25
the sheet will auto populate all numbers. this part is working properly. MY issue is if you look at the Bad Debt number, the correct response should in cell f21 should be $636.46 because in order to hit the next level of pay, you must at least hit $3,424,082.00. I can not figure out how to get the correct formula that will put the right pay out. Basically in order to hit a certain level of payout you must hit that next number, even if you are a $1 higher you can not get the pay out. So for example if your bad debt is $3,424,083 you would be paid out at 100%, not 120%.
where do i put the indirect.ext to below formula so that that Test.exe file be checked offline .. this below works only if the test.exe is open.
=IF(A2="";"";COUNTIF('C:Folder[Test 24.02.10.xls]Table1'!A$1:A$65536;A2))
Since the Test file is generated every day..
how can i make the Test file shown every day with different date.. this 24.02.10 is not permanent.. everyday changes.. meaning tomorrow it checks Test 25.02.10.exe, Friday it checks 26.02.10 etc.
I could make a cell for date input .. and from that cell it could be added up to enter into above formula automatically..
In sheet1, I wrote my data for lookup porpose. The data named (Table). Then I saved it as Add-in (named TEST). That Add-in, already added to my excel Add-in
I open another excel file but How can I use lookup formula from that data (Table) in sheet1 in that Add-in (Test)?
I have a list of rules on how to group account numbers. An example is below. I have a very long list of full account numbers (no wildcards). There are roughly 75 rules on how to group the over 40,000 accounts. I want to use the vlookup to determine what group each full account number (always 11 characters) would belong to? It seems that the vlookup isn't treating the ?'s as wildcards. I can use the full account number rules with the wildcards in the cell in the sumif function though.
So ultimately I would like to have my list of account numbers like 40000000000 and 40000000001 know that they belong in group 1 based on the rule table below.
Full Account Number
Account
Subaccount
Group
[code]....
I have a data entry sheet for attendance that shows the individuals name, date and hours attended. Each individual attendance is addedd to a new row. I need to transpose this data and display it in a report table, with the names in column A and showing hours worked for each day of that week. The formula needs to accomodate the growing data entry sheet as records are added (I'm using a date picker to change the week in the report sheet).
I've tried match, lookup and index and have confused myself thoroughly! Below is a sample of the data entry sheet (on left) and report table (on right)
******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutH1I1J1K1L1M1=
ABCDEFGHIJKLM1SurnameDateHours**Surname1-Jan2-Jan3-Jan4-Jan5-Jan6-Jan7-Jan2Smith1-Jan-076**Smith63600363Jones1-Jan-076**Jones66000304Rogers1-Jan-076**Rogers60600005Hathaway1-Jan-076**Hathaway60600006Pearson1-Jan-076**Pearson60000007Wills1-Jan-076**Wills60000008Smith2-Jan-073**********9Jones2-Jan-076**********10Smith3-Jan-076**********11Rogers3-Jan-076**********12Hathaway3-Jan-076**********13Smith6-Jan-073**********14Rogers6-Jan-073**********15Rogers7-Jan-076**********16Rogers8-Jan-076**********17Rogers5-Feb-076**********18Smith6-Feb-076**********19Jones6-Feb-076**********20Rogers
I have a RAW DATA work sheet that has data of electricity consumption for a given week but it is in a vrtical table.
I have many other work work sheets in the workbook that I require to look at the RAW data and the return the correct information in the specified cells
I need the store number that is in cell F1 of each sheet and the Date on each sheet that are on Row4 of each sheet to Look up and match the information in ROW1 for the store number and columnA for the dates.
then in columnB of RAW DATA I have time intervals of 30mins which need to match up with the time intervals on the sheets and display the readings from the RAW data on the sheets.
******** ******************** src="http://www.interq.or.jp/sun/puremis/...<CENTER><TABLE cellSpacing=0 cellPadding=0 align=center>Microsoft Excel - Energy Analysis WE15-03-09.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA2A3A4A5A6A7A8=ABCDEFGHIJKLMNO1Reading DateReading Time8912116617118519682296710191119125612571292209/03/200900:0012.5926.74929.69668.728.6487.526.5616.2312.6416.3818.08317.02719.569309/03/200900:3011.8467.211.49610.1245.8726.821.817.9811.3216.711.96214.65619.243409/03/200901:0010.7368.11211.19811.286.27.415.2330.3412.0416.269.5527.26429.02509/03/200901:3010.78767.612810.68510.40725.6966.814.888.936.8416.618.53448.72645.4432609/03/200902:0011.0727.235213.01310.3235.9288.814.757.875.9218.059.38247.09445.3136709/03/200902:3011.2996.819210.26210.1765.70410.414.758.135.0916.489.0566.88325.1984809/03/200903:0011.8116.18248.952411.3695.88.314.697.774.9916.87.20964.71046.2496RAW DATA [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am trying to come up with a formula that will allow the commission calculation to be done automatically once data is inputted in cell A2 and E2. I have tried IF statements, but can not figure out how to make it work. I am not able to figure out how to get cells F9 and F19 to work with the proper formula.
View 4 Replies View RelatedI'm trying to write a formula to take data from the same cell in each of 50+ sheets and put it into a summary sheet:
On each sheet i have the total for that sheet in a cell, H11
in the summary sheet i want to list these horizontally, so total of sheet 1 into the summary sheet in D5, sheet 2 in E5, sheet 3 in F5 and so on...
Is there a way to write and copy a formula or will I have to manually amend the formula for each sheet ref?
I am trying to use the formula in Sheet3 cell T4 for the summary. If I added an OR to IF statement, the answer is incorrect.
The formula should state like this:
if the result is not in Sheet1 then it should lookup the value in Sheet2. But, there are instance that the value is not only VL. It may be EL or SL or AWOL or VL 0.5 ... If this is not the value, then the result must be blank instead of the plotted time in Sheet2.
I have a Master Price list on one tab (oddly enough, named Master Price.!) and 4 suppliers on seperate tabs, Supplier A, B C & D. See attached..
Each supplier is capable of supplying various items and they cross each other in what they can offer. On the top of the Master Price is a list of the Suppliers.
Each week I get a price list from each of the Suppliers. What I want to do is dump their list on to their respective sheets in my file and run a macro of sorts that compares their list with the Master list. If it finds a match, place the respective suppleirs list onto the Master list under their respective heading ???
I'm a first-time caller as they say. I need to extract data from the same row in a sequence of sheets and copy on to a separate sheet using the sheet name as a ' lookup value', and the row across sheets as 'table array'. I want to avoid using macros if possible. This has to be applied to a number of workbooks with different sheet names.
View 3 Replies View RelatedI have two workbooks of clinical data: one main of 1,400,000 rows and one small of 30,000 rows. What I want to do is compare the entries in small to find out whether they exist in main. All I need is a TRUE/FALSE result.
Eventually I want to run a comparison of :
Unique number, surname, firstname, DoB and gender. (amusing, excelforum will not allow me to type ***). For now I am just trying to figure out how to do it with the unique number.
I have got the hang of using the vlookup function, but have now found that it cannot search across multiple worksheets. Main is spread across 16 worksheets.
I have two worksheets with different data in them. In worksheet "Sheet1"
A B C (?)
1 01 03
2 01 03
3 01 03
4 03 03
5 02 04
...
In worksheeet "Sheet2"
A B C
1 01 03 Mechanical Engineering
2 01 04 Aerospace Engineering
3 02 03 Electrical Engineering
4 02 04 Electronic Engineering
5 03 03 Hospitality
What i would like to do is to fill in the C column in Sheet1 by checking if the value for A and B columns match up with those in Sheet2, then copy the value in C column and put into C column in sheet1. for example if A1 = 01 and B1 = 03, then it is Mechanical Engineering. I was thinking of using VLOOKUP but don't think it'd take "if else" criteria.
I have a workbook that has separate tabs for each month. In cell D1 in each sheet is the first day of each month (1/1/08) then in E1 (1/2/08) until the end of the month.
In each sheets - the total for each day is in D30 then E30, etc...depending on which column the last day of the month ended up in.
Then I have a "Report" on using its own worksheet in the same workbook. I would like to be able to type in a date in cell F4 "Report" tab and then for cell A9 "Report" tab to be able to search through JAN D1-?, then FEB D1-?, then MAR D1-?, etc. until it finds the date. Then I would like for it to return the corresponding value found in D30 or E30, etc.
I'm having trouble looking up text from several worksheets. I've tried hlookup;
=HLOOKUP("H1", '1'!B6:O32,27,FALSE)
but get nowhere when text is in different sheets. I've attached simplified sample... lookup "H1" - holiday1 on sheet1 and return date to "Holiday" sheet. I've tried vlookup across worksheets code, but can't figure out how to customize.
I have a workbook which has a number of activity sheets which calculate a cost against an individual on a number of tasks they may do. There are a number of worksheets and individuals might appear on a number of these sheets depending on tasks. I have a summary sheet which lists the individuals by code (which appears on the task sheets with their name) and I would like to have a function which looks at the individuals code, finds it on each activity sheet and adds all costs up to provide a total. I know I can do a series of Vlookups and SUM Formula these together but wondered if there is a why of combining functions (or another function) which would do this.
View 6 Replies View RelatedI have 3 Sheets named Paid, Rejected, and Reprocessed.
On the Paid and Rejected sheets I have 2 fields Customer # (Column A), and Amount (Column Q). (The customer # field has many duplicates but the amounts are never duplicates)
On the Reprocessed sheet I have all the rejected items (all fields) and also a field named Reprocessed. I need to use a formula that will check the Paid sheet for any items that have the same Customer # and Amount and return the amount
There are 8,216 rejected items and 45,047 paid items. Some items were originally rejected have been reprocessed and show under paid.
Any thoughts on which formula I should use?
I am in the process of creating a Phone Roster for my unit. On Sheet1 is their administrative data (Name, Position, Phone Number, etc.). What I am attempting to do is use a formula to find the persons name for that position and place it in the appropriate position and then their phone number below.
Admin!H:H contains the positions
Admin!B:B contains their name
Admin!N:N contains their phone number
I believe the following is what I need =LOOKUP("Operations NCO",Admin!$H:$H,Admin!$B:$B) and it works, but only for the first person on Sheet 2. After that it is random. If there a different formula I need to use to make this work?
When I get the phone number I used =LOOKUP("Operations CO",Admin!$H:$H,Admin!$N:$N) and the same thing happens. It works for the first person and everything else is incorrect.
A problem is the Admin sheet is listed alphabetically, not by position, so I cant use a specific cell to copy the data. I need the formula to find the position, then find the name and phone number of the person in said position.
What I want to do is to vlookup site IDs in column A of sheet 2, into Sheet 1. The problem is there are two criteria
1- The code finds the roads names of column B. Sheet1 in column.sheet2
2- Considering that the road names are not unique, then within the same roads checks for column C.sheet1 in column D.sheet2
3- When it find the correct value return column A.sheet2 into column A.sheet1
In the case of the picture assuming we are in cell A4.sheet 1, it would go and look for Abbotts road within range (a2:e9) in sheet2 and find several, then go and look for the next criteria which is value 890 (C4.sheet1) and when in finds it in in D4.sheet2 returns A4.sheet2 into A4.sheet1 and it needs to continue doing that until row 2700.
Untitled.jpg
I have 2 sheets.
Sheet one column A has random dates from 1 jan 2013 to present in order base on fuel purchase dates for our company.
sheet one column F has the purchase price i.e 3.98 gallon
Sheet one column A can have a date entry of lets say 2/4/13 with no data in F because no fuel was purchased just the meter was being read.
Then Sheet one column A can have 2/5/13 where column F has 3.78 where fuel was purchased. (these are 500 gallons tanks that are being refilled as needed)
Sheet 2 row B has just the month formatted as Jan 13, Feb 13, Mar 13, .... you can use B1, B2, B3...ECT for the remaining months
What I am looking for is on sheet 2 in cell C1 a way to look at B1 for the month (i.e Jan 13) look at a range of cells on sheet 1 column A for any dates that fall in the month of Jan, then look for data in corresponding F range and if no data is found then use the last months data (Dec 12)
I can make sure I place a dollor figure in the first row of Jan on the sheet, so by default we can use that if no data exist for Feb.
I am working on a worksheet. I have the first tab at the bottom and that sheet contains all my data, and the additional tabs moving on the bottom are portions of that data for clarity. What i have on the primary sheet is 5 columns ( Name(A), Total(B), Tax(C), Amount(D), Date(E)) and being the master lists everything. I can add a filter to choose the name i want and naturally that only shows the relevant data for that name. What i want to do on the second tab along the bottom which is only relevant for the name i have chosen, their own sheet if you like is to be able to extract the data from the master sheet on a periodical basis. For example I have the same data that i need to show (including some additional stuff that manually include) and i will need to include Total, Tax, Amount and Date columns. What i want is to be able to have a drop down list in the cells below the Date column so that when i select the date it automatically completes the Total, Tax, Amount information that is shown on the primary sheet. So Total will be A column through to Date in D column and changing the date in column D will populate A to C with the data automatically.
View 9 Replies View RelatedI am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
View 9 Replies View Relatedhere is an example....
(this is on a sheet called Summary)
----A--------B --------C------- D
1Names----At Bats----Hits----Batting Average
2Tom-------38--------31------.816
3Derek------19--------14------.737
4Joey-------40--------28------.700
5Chris-------40--------27------.675
6Chuck------37--------24------.649
Using the LARGE function, Excel has created a list based on batting averages(on a separate sheet called Line-up). It looks like this.....
---A----------B
1Names----Averages
2 -----------.737
3 -----------.700
4 -----------.675
5 -----------.816
6 -----------.649
The problem I am having is figuring a way for Excel to also bring the corresponding names (after using the LARGE function to create the line up list).
I have a very large spreadsheet of customer information(I call it the master spreadsheet). Each row contains only 3 things: Account number, product bought, Price
Later I receive the money from the customer for that product(the pay sheet) that contains the exact same thing in the same order: Account number, Product bought, Price paid.
What I'm trying to do is compare the two spreadsheets so that when i receive the pay sheet of cusomters who have paid with the amount it will deduct it from the master sheet.
So it should compare account numbers when it finds a match then it should subtract the amount paid (column C) from the master spreadheet price column(column C also).
sometimes customers don't pay the right price so it has to be a subtraction so I can see if it was over paied, underpaid etc.
Right now I'm still doing it manually combining the two documents sorting it by account number and checking for matches in column A (account number).