I would like to select all of the data from the active cell to the last used cell in the column. Obvious, as i'm posting here, this isn't working as i intended. I want to select this data and then paste it into range KE16.
I have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted.
I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank.
What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added.
In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].
whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
I have a macro where I sum a large number of cells in column AZ. How can I have the Macro end in the last cell of column AZ where the sum is located? The length varies in each file.
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
Is there a formula I can use to locate the last active cell in a column. I did use the count function, however this isn't always reliable if there are blank cells within the column
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04 Date3/06/063/06/06n1/06/06 Tanker8248824617606 WhoJ AshJ AshEmptyHarry Date Tanker Who
Private Sub DueCommandButton_Click() Dim strRecordID As Range Dim rngData As Range Dim Vents2 As Range, Tanker_Result As Range Dim wsheet1 As Worksheet, wsheet2 As Worksheet Dim Column_Name As Range Dim ActiveCell As Range Set wsheet1 = Worksheets("Sheet1") Set wsheet2 = Worksheets("Sheet2")....................
I've been racking my brains trying to figure this out but cant, please can someone assist. I need to write some vba code that looks at cells in column aa and ag (on the same row) and displays a message is ag > 0 and aa <> "Agency".
I have a sort procedure I have been working on. Sort By Active Cell Column Now I would like to make sure the row of the activecell.column is row 7. I tried
Private Sub comp_myMonthlyReport_SortAscend() Dim rng As Range With ActiveWindow rng = .ActiveCell(7, .ActiveCell.Column) End With Selection.Sort Key1:=rng, _ Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub
But I receive this error: Run-time error '91': Object variable or With block variable not set
I use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
ABCDEFGHIJKLMNO 1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip 2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117 3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117 4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117 An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
Is it possible to click on a cell in column C, and have the wishlist below happen:
That active cell's row is hightlighted.
Any cell in that column that has the same value as active cell is also highlighted.
Plus, any cell in another sheet that has that value it's row is highlighted too.
Example:
I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
The attached sample workbook has a listbox of areas in a userform. The Textbox on the user form is so that the user can edit the Area names in the listbox. The userform functions fine as long as the column that contains the area name is not hidden. What I want to be able to do is edit the Area Names using the Textbox with the area name column hidden.
Is there a way to highlight the row and column of the active cell? The highlighting will move as the active cell is moved around the spread sheet. I have a newbie manager that is bugging the pea-turkey out of me! He wants to be able to easily see where he is within some of our sheets while he is in a vehicle or outside on a job site...seems like an "accessibility" type issue, but can't find anything in Excel "Options."
1st post so hope that title isn't too vague. Using VBA, I have a macro that will find a column based on a week number and add in a new column. It will then offset the ActiveCell down one. I now need the macro to SUM all values in that row to the left of the ActiveCell. My original thought was to use:
Unfortunately, there are gaps in the data field, blank cells that should count as zero value. How can I highlight all cells to the left, from whichever column the active cell is in, through to column B?
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet)
what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14.
if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
I have found this code by searching witch is perfect
Code: If Target.Cells.Count > 1 Then Exit Sub Application.ScreenUpdating = False Cells.Interior.ColorIndex = 0 With Target 'With the cell that was selected, .EntireRow.Interior.ColorIndex = 8 .EntireColumn.Interior.ColorIndex = 8 End With Application.ScreenUpdating = True
The point is that i want to retain the previous formatting of cells when i select another cell. And also i would like to create a switch to turn the Worksheet_SelectionChange event on and off. The tricky part is here i guess, becouse i would like when turned off to retain the previous formatting also.
I am attempting to write an Excel Macro that would allow me to Click on a particular row and have the fields in my form fill with the data in the columns of the row.
I am fairly new to Macros and VBA, but know that this has got to be a possibility.
I am making a spreadsheet in which I have been asked to have certain column greyed-out based on an answer that was given in a dropdown menu. Specifically, a dropdown menu in column D asks if the client was a Youth or an Adult. Depending on what the anwer is, other columns in the spreadsheet will be greyed-out; different ones for each answer. My problem is, I need this to occur for the active row being editted. For example: The first row that the user can input data into is row 4. If D4 is answered with "Adult" then certain other columns are greyed-out. However, if the next time the user updates the spreadsheet with information for a different client (now entering information in row 5) and they select "Youth" for column D5, then different columns get greyed-out. The columns that are greyed-out will depend upon the answer for the dropdown menu in column D for whatever row is actively being editted.
I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.
The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.
So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.
As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.
MWTS034G22 Job Card Sheet [URL] ..... Windows 7 (32bit) MS EXCEL 2010
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code: For Each c In Range("Q2:AC2").Cells If c = period Then c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I would like to use this formula many times in the sheet, so I would need a reference to the cell the formula is in, and have the SUM range until the next empty cell one column to the left.
So I would need something like (literally):
=SUM(Offset activecell (1,-1) : Offset activecell (1, (look for next empty cell -1)) / Offset activecell (0,-1)
Need to find the first cell above the active cell containing any sort of variable (integer, string value, cell fill colour, named range, etc...).
For example, a column contains multiple integer values between 1 and 10. I would like the macro to "locate" a specified value, say 3. Ideally the macro will select the first cell matching this criteria, located above the active cell. Once located, the resulting cell will be added to a range to be copy-pasted to a new worksheet.
I am planning to use this code for various applications in a workbook I am creating. At present the code will be used to locate string values, and cell fill colours. It is also likely this will extend to other types of variables in the future.
I've found information relating to the find function, but nothing specifically to find the first result above the active cell.
