How To Add 2 Groups Of Cells And Divide Number By 60
Feb 6, 2014I am trying to add 2 groups of cells and then divide the number by 60?
I can't get it to divide? It will only total.
=SUM(T807:T832)+SUM(T837:T846)/60
I am trying to add 2 groups of cells and then divide the number by 60?
I can't get it to divide? It will only total.
=SUM(T807:T832)+SUM(T837:T846)/60
I am trying to divide the total of two groups of cells and I used the following formula:
=sum(B3:M3)/(B17:M17)
However, that is not a correct formula.
I really struggle with the following scenario:
A1=5 B1=4 C1=0 D1=0 E1=5
What I want to do is to divide the sum of those cells with the number of cells with a value > 0 (but all cells must be controlled to check if the value > 0).
In real life it's easy to see that I want to do 14/3 (A1>0, B1>0 and E1>0 equals three cells), but how to write this formula in Excel?
I have attached a sheet as an example, as i am trying to Divide a cell by the number of populated cells in that column e.g column (A) has a table of 16 but only has 13 populated cells in that column, the sum would be something like this =sum(A18/13. Sometimes the column will have less and at times more populated.
test sum skip blank cells.xlsx
I have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.
=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)
I am looking for a way to highlight groups of identical number cells in alternating grey and white. My goal is to make it clear when there is a repeating set of numbers. Below is an example of what a completed state of this would look like that I created manually. The real form I will be using this code on will have long number which is why I am looking for this added clarification. I am using excel 2010.
1
1
2
3
4
[code].....
I am wondering if it is possible to create a formula in a cell that will divide whatever number is entered into that cell by a set or fixed number.
ie. I enter the number 9 in the cell and when I press enter, the 9 is instantly divided by 15 and the answer is displayed in the cell where I just typed the 9.
I having a bit of trouble entering numbers in Excel, every time I try to enter a number it seems to divide it by 100. For example : - 1 entered in to a cell becomes 0.01, 100 becomes 1....etc. I've tried formatting the cells and had no luck, tried Tool>Options but not sure where to look.
View 2 Replies View Related=1/25%
is it that you want a UDF
Function MyFun(a,b)
MyFun = a / b
End Function
Usage:
=MyFun(1, 25%)
Mangesh
"Gonecoastal1" <Gonecoastal1@discussions.microsoft.com> wrote in message
news:B257DADD-0042-4CF8-88DF-1D17AEAFF627@microsoft.com...
I have an array in my code and I need to divide each elements of the array with a constant.
View 9 Replies View RelatedI have data in a column (G) consisting of zero and ones. I would like to count the number of clusters of the number 1 in the data. For example in the data below there are 8 ones. But instead, I need to calculate how many groups of 1s occur. So in the case below the group of 1s = 3.
In terms of what defines a group. Whenever there is a zero either before or after the occurance of a 1 constitues a group, i.e the groups are broken out by zeros.
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
1
0
0
I have a lot of cells containing numbers. Some numbers are small, some are big.
I want to divide all numbers which are greater than 300 by 1000.
IF cell A2 > 300 THEN divide by 1000.
How to do that? Is it possible to convert value in the same cell like using conditional formatting principle?
I basically have lots of lists of 12 cells. how ever some of those lists contain errors (e.g instead of having 12 numbers it will only have 10)
so instead of doing =sum(a1:a12)/12 i want to divide by the amount of numbers in that area in this case 10 so i can get an average.
I have a simple formula that adds two numbers and divide the result by another number
K1: SUM(E1,F1) / H1
K2: SUM(E2,F2) / H2
K3: SUM(E3,F3) / H3
K4: SUM(E4,F4) / H4
K5: SUM(E5,F5) / H5
etc, etc
and then I average the results
AVERAGE(K1:K5)
etc, etc
When H1, H2, H3, etc is 0, it generates a #DIV/0! (since you cannot divide by 0)
I want a formula that I everytime a H1, H2, H3, etc is 0, I want to set it to a specific number H1, H2, H3, etc to 15.00
For example:
IF (H1 = 0, 15.00, sum(E1,F1) / H1)
If the number provided (H1) is 0, set it to 15.00, otherwise add the two numbers (E1, F1), and divide this result by the number provided (H1)
But this is where the problem is:
In every single cell that I have NOT yet provided information, it treats the BLANK cells as if it was 0, and has set every single cell to 15.00.
In sheet1, (B2 & C2) are the numbers entered by the user. After they entered, it will create rows of table according to the number of groups they entered on the respective sheets.
how do I let it create the groups itself?
I have a sumproduct formula, I am trying to divide the output by the number of members used in the calculation:
This is my data set
4/10/2014102.6214/10/201499.5144/8/2014106.144/8/2014105.4
4/9/2014102.3284/9/201499.3864/2/2014105.8734/7/2014103.6
4/8/2014102.0884/8/201498.7953/17/2014105.5864/3/2014103.95
my sumproduct function is adding up all items that fall on that date which is fine, but i would love to calculate an average so divide by the number of items that were used in the calculation, is that possible?
=SUMPRODUCT(--(A1:G9=A11),(B1:H9))
I need a formula that will divide a number and if the answer is greater than a 100 then blank.
i've been using this =IFERROR(SUM(H4/C4,"",IF(K4>100,""))) but no luck.
I'm trying to create a formula which will allow me to do the following
1. Enter the number of jobs received
2. Divide it by the staff available without ending up with decimals.
As an example. Say I have 60 jobs to be allocated and there are 13 peeps to distribute them to I'm currently getting 4.62. What I need to do is make sure that the jobs are only issued as whole numbers. E.g 5 peeps gets 4 and 8 get 5. I also need to factor in jobs on hand etc but I have already cracked this.
I have 4 columns labelled 1st Year, Frequency, Spread and cost. then I have columns spanning upto 30 they represent years but can be labelled as 1 to 30. My challenge is that I want a formula/function/macro that depending on what I type in the first 4 columns it will populate the remaining 30 columns with either cost or 0.
Example: if I had £9,000 at a frequency of 10, starting on the 5th year with a spread of 3.
The cost represents the cost of each frequent. so in the example I would get £3,000 on each of the 5th,6th and 7th years then another £3,000 on the 15th,16th,17th years and finally another £3,000 on the 25th, 26th and 27th years.
what I want to be able to do is have one function/formula that I can paste across all of the year cells. I currently have a formula that can copy the cost at different frequencies but I cant figure the spread out.
=IF($K:$K>0,IF(OR($8:$8=$J:$J,MOD($8:$8-$J:$J,$K:$K)=0),$L:$L,0),0)
where K is frequency
8:8 is year
J is cost
what is the best way to approach this?
How could you divide all numbers in a pivot table by a certain number?
View 1 Replies View RelatedI have two sets of data to compare. One is real world data, the other is forecasted data. I have real daily data for every day over about 3 months. The predictions though, there may be 4-6 predictions for ever one real daily value.
What I'd like to do is have a function that looks at Column A's date (real daily value) and Column C's date (predicted data) and if Column C equals Column A, then divide corresponding data in Column B by value in Column D.
If I have a value of lets say 53, I need it broken down into equal and whole numbers across the spread sheet with the last one being the remaining value.
Currently for example in cell F5 I have a value of 41 that I need to break down so
I have done the following:
In Cell P5 =IF(F5>=25,F5-21,F5)
Then in Cell Z5 =IF(P5>=25,P5-21,P5) and this goes on until I have zero value from the original value in the last cell can i not do this all in one formula and have the results populate in other cells.
I have just started to try and learn VBA for excel. the resource I have been using are books and the WEB. Some how, not sure how there was/is some code where all enteries in all worksheets are divided by 100, i.e if I enter 2222 after clicking the enter button the result in the cell is 22.22. I have deleted all macros and code however the problem still exist.
View 3 Replies View RelatedHow to divide two cells if there is no text in the first?
i.e.: if there is text display a 0 and if there is a number to divide it with a second number in another cell.
Fallowed EXCEL instruction, for >DIVIDE TEXT ACROSS CELS< but result is not what it should be.
1, I select . >FIXED WIDTH< Than I create ONE !! >BREAK LINE<
2, click NEXT / FINISH.
3, MY text is split but not to two column but to MANY COLUMNS?
Repeat many times, always careful that ONLY ONE break line selected.
Also when I first select. >FIXED WIDTH< and click next.
My text is already market with many >BREAK LINES< so I have to first
delete all, seems to me strange.
i want to divide two cells from different sheets using a macro
i have this at the moment
='Cost Sheet A'!$L138/'Cost Sheet A'!$AD155
and have gathered that i can divide 2 cells that are in the same sheet using macros
but i want to link to two different sheets using a macro
I have two groups of data? I selected the cells in yellow and defined the name of those cells as group1. I want to be to do absolute value of individual cells and add them up. I tried pressing shift control and enter and it still isn't giving me a number. I can do it if the numbers are next to each other but if they are separated by a row it won't let me.
[URL]
i want to divide eg. >53/>12 but i get #value! error. i have huge columns full of is so i dont wanna so 53/12 kinda thing 1000 times. whats the formula i need to use?
View 6 Replies View RelatedI need to create a grouped sequence that changes every 10 rows.
So in Column A cell A2 the number would start at 01349 and every 10 cells it would decrease by 1 and go on down to 0
so it would look something like this:
01349
01349
01349
01349
01349
01349
01349
01349
01349
01349
01348
01348 ...
i need code that can look at cell d23 and take that number( say it is 13) and break it down into groups. that have 3, 4 or 5 per group. in this example 13 can be broken down into
View 3 Replies View Related