I have a lot of cells containing numbers. Some numbers are small, some are big.
I want to divide all numbers which are greater than 300 by 1000.
IF cell A2 > 300 THEN divide by 1000.
How to do that? Is it possible to convert value in the same cell like using conditional formatting principle?
I need a formula that will divide a number and if the answer is greater than a 100 then blank.
i've been using this =IFERROR(SUM(H4/C4,"",IF(K4>100,""))) but no luck.
I am wondering if it is possible to create a formula in a cell that will divide whatever number is entered into that cell by a set or fixed number.
ie. I enter the number 9 in the cell and when I press enter, the 9 is instantly divided by 15 and the answer is displayed in the cell where I just typed the 9.
I have attached a sheet as an example, as i am trying to Divide a cell by the number of populated cells in that column e.g column (A) has a table of 16 but only has 13 populated cells in that column, the sum would be something like this =sum(A18/13. Sometimes the column will have less and at times more populated.
test sum skip blank cells.xlsx
Cell A1 = 3
Cell A2 = 4
Is there a formula to calculate
(3*4)+(2*4)+(1*4)
I need to multiply every integer less than the number in cell A1 and greater than zero by the number cell in A2. I was thinking factorial, but that's not it... Can't remember from my math days.
I have a spreadsheet that I need a formula so that when a number appears in one column, then automatically it will put text (only) in the adjacent column. I have attached the sample spreadsheet for review. What I need is if there is a number in column A then, put a " / " (forward slash) in column B. If there is only a 0.00 in column A, then put nothing in column B. I tried the IF function an it errored out stating that the " / " was not a number.
View 5 Replies View RelatedI have students Kg-5th Gr. I need to identify the ones over-aged when I enter the information. The following is what I'm trying to use but I get Y1 for ever cell. I need it to Identify the student as Y1 for One year overage and Y2 for tow years overage.
View 3 Replies View RelatedI having a bit of trouble entering numbers in Excel, every time I try to enter a number it seems to divide it by 100. For example : - 1 entered in to a cell becomes 0.01, 100 becomes 1....etc. I've tried formatting the cells and had no luck, tried Tool>Options but not sure where to look.
View 2 Replies View RelatedHi, sorry for posting this twice but i wasn't sure which category it fell under!
I have a slight problem with excel and and was wondering if anyone can help.
I have 3 columns, A, B, C: .....
I am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?
View 3 Replies View RelatedI am doing a spread sheet for to enter the times that i do in a rally.
So if i post a time of 00:49.3 and the target time is 03:54.3 i want the cell to turn red, or if the set time is less then the target time it should be green.
How can i do this in excel
=1/25%
is it that you want a UDF
Function MyFun(a,b)
MyFun = a / b
End Function
Usage:
=MyFun(1, 25%)
Mangesh
"Gonecoastal1" <Gonecoastal1@discussions.microsoft.com> wrote in message
news:B257DADD-0042-4CF8-88DF-1D17AEAFF627@microsoft.com...
I really struggle with the following scenario:
A1=5 B1=4 C1=0 D1=0 E1=5
What I want to do is to divide the sum of those cells with the number of cells with a value > 0 (but all cells must be controlled to check if the value > 0).
In real life it's easy to see that I want to do 14/3 (A1>0, B1>0 and E1>0 equals three cells), but how to write this formula in Excel?
I have an array in my code and I need to divide each elements of the array with a constant.
View 9 Replies View RelatedI basically have lots of lists of 12 cells. how ever some of those lists contain errors (e.g instead of having 12 numbers it will only have 10)
so instead of doing =sum(a1:a12)/12 i want to divide by the amount of numbers in that area in this case 10 so i can get an average.
I am trying to add 2 groups of cells and then divide the number by 60?
I can't get it to divide? It will only total.
=SUM(T807:T832)+SUM(T837:T846)/60
I have a simple formula that adds two numbers and divide the result by another number
K1: SUM(E1,F1) / H1
K2: SUM(E2,F2) / H2
K3: SUM(E3,F3) / H3
K4: SUM(E4,F4) / H4
K5: SUM(E5,F5) / H5
etc, etc
and then I average the results
AVERAGE(K1:K5)
etc, etc
When H1, H2, H3, etc is 0, it generates a #DIV/0! (since you cannot divide by 0)
I want a formula that I everytime a H1, H2, H3, etc is 0, I want to set it to a specific number H1, H2, H3, etc to 15.00
For example:
IF (H1 = 0, 15.00, sum(E1,F1) / H1)
If the number provided (H1) is 0, set it to 15.00, otherwise add the two numbers (E1, F1), and divide this result by the number provided (H1)
But this is where the problem is:
In every single cell that I have NOT yet provided information, it treats the BLANK cells as if it was 0, and has set every single cell to 15.00.
I have a sumproduct formula, I am trying to divide the output by the number of members used in the calculation:
This is my data set
4/10/2014102.6214/10/201499.5144/8/2014106.144/8/2014105.4
4/9/2014102.3284/9/201499.3864/2/2014105.8734/7/2014103.6
4/8/2014102.0884/8/201498.7953/17/2014105.5864/3/2014103.95
my sumproduct function is adding up all items that fall on that date which is fine, but i would love to calculate an average so divide by the number of items that were used in the calculation, is that possible?
=SUMPRODUCT(--(A1:G9=A11),(B1:H9))
I'm trying to create a formula which will allow me to do the following
1. Enter the number of jobs received
2. Divide it by the staff available without ending up with decimals.
As an example. Say I have 60 jobs to be allocated and there are 13 peeps to distribute them to I'm currently getting 4.62. What I need to do is make sure that the jobs are only issued as whole numbers. E.g 5 peeps gets 4 and 8 get 5. I also need to factor in jobs on hand etc but I have already cracked this.
I have 4 columns labelled 1st Year, Frequency, Spread and cost. then I have columns spanning upto 30 they represent years but can be labelled as 1 to 30. My challenge is that I want a formula/function/macro that depending on what I type in the first 4 columns it will populate the remaining 30 columns with either cost or 0.
Example: if I had £9,000 at a frequency of 10, starting on the 5th year with a spread of 3.
The cost represents the cost of each frequent. so in the example I would get £3,000 on each of the 5th,6th and 7th years then another £3,000 on the 15th,16th,17th years and finally another £3,000 on the 25th, 26th and 27th years.
what I want to be able to do is have one function/formula that I can paste across all of the year cells. I currently have a formula that can copy the cost at different frequencies but I cant figure the spread out.
=IF($K:$K>0,IF(OR($8:$8=$J:$J,MOD($8:$8-$J:$J,$K:$K)=0),$L:$L,0),0)
where K is frequency
8:8 is year
J is cost
what is the best way to approach this?
How could you divide all numbers in a pivot table by a certain number?
View 1 Replies View RelatedI have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.
=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)
I have to make a table that shows that a if someone purchases
less than 5 items they receive no discount
5-10 items they receive 2% discount
11-20 items they receive 5% discount
21-50 items they receive 8% discount
over 50 items they receive 10%
and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.
[Code] ......
How to create a formula in cell M2 that looks at the second row of numbers (0 and 500s) and tells me the rightmost value that is greater than zero. In this example it would return 12.
Second Question: Is there a way to return any counted value, for example the second-to-last number that is over 0?
I have a spreadsheet with rows of data. I need a formula that will return the column number of the last column in a row where there is a value >0.
Let's say that cells A1:F1 contain values. Some have values of 0 while others have values >0. I need a formula in cell G1 that will tell me the column number of the last value >0.
A B C D E F
0 2 5 0 6 0
So the formula in G1 would return a value of 5, which corresponds to column E.
I'm lost on VBA, but I have been successful at recording a few extremely simple macros. I have a number of pdf statements that I have run through OCR, and the OCR often misses the decimal point so that 43.85 comes out as 4385. (this is in dollars, so everything has 2 decimals).
These cells are usually pretty easy to spot, so I want to select that cell, press a keystroke or 2, and divide the value in that cell by 100. I assumed that by selecting "relative cell references", and recording a macro with the keystrokes "<F2>/100<HOME>=" (without the quotes, of course), I would accomplish that. But instead, it places a constant in that cell, with the value obtained in the cell where I recorded the macro.
Is there an equation to count numbers greater than zero without adding an additional column?
I had a COUNTIF equation but realized that the criteria that I used to use required an additional column. The additional column I used to have would be something along the lines of =IF(A1>0, "x", "") and then count the X's. I was just wondering if there was another equation that could reduce that step.
With four numbers, I am attempting to "return" a number that is greater than zero, EVEN IF zero is in the array. Meaning, I need the number greater zero, knowing zero is within the array. This will be a part of a much longer concatenate formula.
010 5 0
I would expect the answer to be "5".
I tried: =abs(min(A1:D1))
This works great if there is a negative number (e.g. a -5, rather than 5 shown above), but when the numbers are all positive, the result is "0", I want 5 or the next greater number above zero.
How do you put an answer in a cell after subtracting 2 numbers and if greater than a number put that answer in. This isnt right just an example
=IF(a1-a2 is greater than 10 then put that answer in the cell if not just leave it blank?
I like to do is if cell H3 is Greater than cell A35 to promt the message box below. But if less than do nothing. And if possible if less than to look at sheet 2 cell A35 and do the same.
If WorksheetFunction.Sum(Range("H3") >= ("A35")) Then Exit Sub
MsgBox "QTY. MUST BE GREATER THAN END FEQUENCY", vbOKOnly
