Gather Countries From List Based On Sum (Index / Match / Large / Sumif)
Jul 2, 2013
I have a table of sales by month per account. Each account has an associated country, but there may be many duplicates of each country per month.
I want to create a formula which indexes the country field and gives me the country with the highest total sum for a specified date range. I'd like to be able to drag the formula down and have the country with the highest sales, then the second highest, and third highest, and so-on. Column ranges are specified below.
K - L - M - N
------------------------------------------------
Month
Year
CtryDsc
Rev
1
2011
[code].....
I was thinking of using an array function utilizing index, large, sumif, and match, but I am getting stuck. I'm honestly not sure if what I'm looking for is even possible, but in Excel, everything is possible, so there has to be a way!
View 4 Replies
ADVERTISEMENT
Mar 31, 2008
I have an Excel sheet on which I need to calculate the largest, 2nd largest and 3rd largest volumes from the range of data.
I've done this using an INDEX and MATCH formula to return the Status # for the largest, 2nd and 3rd largest volumes. So the formulas are:
Rank 1
=INDEX(B3:G3,MATCH(MAX(B3:G3),B3:G3,0))
Rank 2
=INDEX(B3:G3,MATCH(LARGE(B3:G3,2),B3:G3,0))
Rank 3
=INDEX(B3:G3,MATCH(LARGE(B3:G3,3),B3:G3,0))
However when the volumes are the same the formula returns the same Status # for both. For example below, for Site 1; Status 3 is ranked 1st and then Status 1 is ranked 2nd, for the 3rd rank, the formula is returning Status 1 again.
Is there any way of changing the formula to return Status 4 as the 3rd ranked instead of returning Status 1 again?
Status 1Status 2Status 3Status 4Status 5Status 6Rank 1Rank 2Rank 3Site 18655802Status 3Status 1Status 1Site 241818691Status 2Status 2Status 5Site 389126220Status 5Status 3Status 2Site 43591872Status 4Status 3Status 5Site 51650015Status 1Status 2Status 2
View 9 Replies
View Related
Jul 14, 2007
I've attached my condensed softball team spreadsheet At the bottom, I'm trying to show the stat leaders, and the problem is the ties. For example, batting avg, there are 2 players tied for 2nd at 0.750, how can i have the name column show each of the 2 tied players (Paul and Nathan)? I think this thread shows what i'm trying to do, but i can't adapt it to my spreadsheet.LARGE Function with Numbers and Text
View 2 Replies
View Related
Feb 10, 2014
I am looking for the largest TOTAL SCORE in each division, but need to display 3 placings. Current error: If the score is a duplicate, it is repeating that score with the same rider.ALSO - I need to add the 'PLUSES' as part of the tiebreaker (i.e. 940 with 24 pluses would be 1st, 940 with 4 pluses, 2nd...etc)
View 3 Replies
View Related
Jul 16, 2012
how to return the top 5 results in a set of data.
In a nutshell, I have data that needs to be sorted but some intermediate to advanced (to me) excel formula needs to be used to sort the ranking properly. I've already used index, match and large but it does not suffice.
View 1 Replies
View Related
Sep 13, 2012
I am attempting to use the LARGE formula to pull the top 3-5 percentages out of a field of 50-100, while using the INDEX/MATCH function to pull the corresponding "descriptor" that is associated with those top 3-5 percentages. (I need to do this across multiple data sets, but I can't get past this 'duplicate' issue) However, I am running into the problem when there are 2 percentages that are identical (WH 14 and WH 16 in pasted text below), then the INDEX/MATCH function only pulls the 1st "descriptor" and doesn't continue down to the Duplicate. how to tell excel to move to the next set of duplicate data and match the 'descriptor' to that data?
I have attached a file that should show what I am trying to do. These are the formulas I am using right now, pulled down into the 3 cells below them to get the top 3.
B1:
[Code]....
C1:
[Code]....
Warehouse S/S %
WH 1 50.00%
WH 2 57.14%
WH 3 0.00%
WH 4 50.00%
WH 5 100.00%
WH 6 60.00%
WH 7 33.33%
WH 8 66.67%
WH9 60.00%
WH 10 63.64%
WH 11 78.57%
WH 12 55.56%
WH 13 42.86%
WH 14 71.43%
WH 15 61.54%
WH 16 71.43%
Attached File: Book1.xlsx
View 9 Replies
View Related
Jun 22, 2012
My spreadsheet has duplicate lookups, which I need to sum. The INDEX MATCH formula will only bring back the first amount in the list, however I need to return the sum of all the matches. I'm assuming I can include a SUMIF, however not sure how to incorporate.
Current Formula Below:
=INDEX('3.5 IFRS Instr Curr YTD in CHF'!$M$27:$CC$400,MATCH('Detail Reconciliation'!$C12,'3.5 IFRS Instr Curr YTD in CHF'!$A$27:$A$400,0),MATCH('Detail Reconciliation'!M12,'3.5 IFRS Instr Curr YTD in CHF'!$M$26:$CC$26,0))
View 9 Replies
View Related
Nov 12, 2013
I need a little coaching on big data. I have two reports, one from a production system the other from the invoicing system. I need to reconcile the two reports to ensure our invoicing ties out to production. At this time I am focusing on 1 particular item code, but there are potentially hundreds of item codes.
I have 1 Item Code.
I have a around a hundred invoices. (Sample 100)
I have a few hundred different customers. (Sample 100)
I have several hundred lines of billing data. (Sample 650)
I have several thousand lines of production data. (Sample 40,000)
In the billing system, per invoice I might have 1 or more billing lines for this item, usually no more than 2.
In the production system, per invoice I might have 5 to 50 or more production lines for this item per invoice.
Example
Prod System:
30 lines of data has a run amount and a total run amount for each line.
I am looking for tools to reconcile this data. VLookup and Index/Matching is not cutting it. VLOOKUP does not move beyond the first line found. Index/Matching wants to add all the prod together. I can get subtotals easy enough. I have tried Concatenation, but when it takes multiple production data lines to equal 1 billing line, this does not work. I needs some thing that can look at the Qty on a billing invoice and tie it out to various lines of production data to identify which production jobs went on that line of the invoice.
Here is a sample. These are fairly easy to resolve, but others are not so easy due to number of production and billing rows.
Invoice number
Billing item
Est. Quantity
Actual quantity
Billable Qty
Sales order
Position number
Sequence
Agreement
Billing source
Description
Total Billable Qty
[Code] ..........
View 4 Replies
View Related
Mar 2, 2014
I am trying to sum the data in "details sheet" column H into "monthly sheet" based on the period and type match.
I am not sure where I am going wrong as the column references returned values that they should. However, the values in Col H from details sheet are not being summed up based on the criteria into monthly sheet.
I am getting zero amounts.
View 5 Replies
View Related
Jun 22, 2009
Following is a summarized example of my data and what I am trying to accomplish.
[Column A] contains a list of account numbers. [Column B] contains current balances, [column C] contains balances from one month ago, [column D] contains balances from two months ago. Within the same spreadsheet I want the ability to type in the account number in one cell and then the column number in another cell. For example, If I type in the account number 1234 and the column number 3, I would get the balance from [column c]...if I typed in the column number 4, I would get the balance from [column D].
My first thought was to use a simple SUMIF formula that would compare the account number I type with the account numbers found in [column A]. The problem is getting a formula that can translate the number 3 to [column C] or the number 4 to [column D]. Note: the actual spreadsheet I am using extends out to column BI.
This is simuilar to the Column Index Number used in a VLOOKUP formula.
View 9 Replies
View Related
Sep 12, 2008
I have a list in which I have to lookup various Groups and find a Name accordingly. I am now using a very simple IF formula but I get blanks too. Refer below for an example. (A and B are data table, D and E are lookup).
Sheet1
ABCDE1NameGroup GroupName2 A A03MikeA AMike4 A A05JasonA AJason
Spreadsheet FormulasCellFormulaE2=IF(B2=D2,A2)E3=IF(B3=D3,A3)E4=IF(B4=D4,A4)E5=IF(B5=D5,A5)
Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
Mar 21, 2014
I have created a sales pipeline list in a workbook. One of the sheets ("Contacted potentials") has the following setup:
A---------------------B---------------C----------------D
Company name--------Location--------Probability--------Total company sales
Rows 1, 2 and 3 have other information. The actual list starts at the 4th row.
In another worksheet ("Overview"), I want to create a list of companies that have agreed on working with us (displayed by a probability of 100%). This should preferably be done in column A. Furthermore, column B should list the total company sales for that specific company. I have tried this myself using INDEX and MATCH formulas, by using the following formula:
=INDEX('Contacted potentials'!$A$4:$A$1000,MATCH(100%,'Contacted potentials'!$C$4:$C$1000,0))
But this only displays one of the companies, not all those which have a probability of 100%.
Ps. it is possible to automatically update this list (by pressing F9) when a company's status changes to 100%?
View 5 Replies
View Related
Mar 2, 2014
Populate my drop down list. I have 2 columns. I want to populate my dropdown list with data from column a that has a specific value in column b. is this possible with out using VBA?
E.g.
Column A / Column B
123 / TEST
126 / TEST
100 / BACON
231 / CHEESE
basically I would like a drop down list that contains the constants from column b. so from the example above it should contain 123 and 126 as options.
View 6 Replies
View Related
Aug 26, 2009
I have a list of data that I want to average the number in column B when there is a match in column A
COLUMN A | COLUMN B
alpha | 100
beta | 200
gamma | 300
alpha | 400
beta | 500
What I'm looking to do is return the MEAN of values in column B where column A = alpha. Though, I would settle for returning a list of the values that match the criteria. Index/Match combinations don't seem to be helping me because they only return the first match, I'd like to return all matches.
View 4 Replies
View Related
Oct 20, 2009
Let's say I have a list in worksheet 1. It's in column A, starts in row 1 and goes.
Red
Orange
Yellow
Green
Blue
Purple
In worksheet 2 I want to list in row 1, starting with column A, which colors have a value next to them. I want the list to match the first worksheet's order. I'm looking for a formula solution.
Example 1
WS 1
Red 3
Orange 4
Yellow 5
Green
Blue 1
Purple..........
View 4 Replies
View Related
Sep 11, 2006
I have a problem with my spreadsheet. I am trying to created a sheet to record time trials for bicycle racing. I have created in the main tab 'time entry' a class, rider #, name, incremental start time, and finish time. There will be 6 classes of racers (i.e. xm,xw,sm,sw,nm,nw). What I am trying to accomplish on the results tab, are the results based on the riders class. All of the riders classed as 'xm' listed with their respective info and time. I have attached a copy of what I have so far.
View 2 Replies
View Related
Jun 6, 2006
I am looking for a formula or something - that when a reference number is used - it popluates cells from a list. Attached is a sample spreadsheet - 2 worksheets are being used - 1 is Purchase List and the 2nd is Fax Commitment. When reference no is filled in on the Fax Commitment sheet and it = the same reference no as on the Purchase List - I need it to populate the appropriate fields (in this case I have colour coded)
View 3 Replies
View Related
Oct 8, 2009
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
View 9 Replies
View Related
Feb 7, 2014
Am trying to use index match to return value in column B based on matching 2 first chars on the left in column A.
Col A Col B
POS Majalt
POS Minalt
POS Instinctive
NB Viral
NB Sierra
NB Pierce
CLM Team1
CLM Team2
OS Tr1
OS Tr2
HR Tetra
HR Pentagon
IT penelope
Cell C1 : NBA MyFormula : {=INDEX(B:B,MATCH(LEFT(C1,2),"*"&$A:$A&"*",0))} <<== I need to find the match of NB only in range A:A to return the related values in Col B.
Expected Result:
NB Viral
NB Sierra
NB Pierce
Other than formula stated above, I've also tried with Isnumber(search), etc but all return errors.
View 14 Replies
View Related
Aug 15, 2014
I have a spread sheet with towns listed in Column G from row 3-81. I months going across row 2 as column labels (they are dates in Jan-14 format). They go from column H-AF.
What I want to happen is to have a formula (not in VBA) which will compare the month in row 2 versus the current month. If it is more than 5 months ago I would like it to return the town in column G for the corresponding row. The only thing I am using to "mark" the last time the town was worked is an X so that is all it needs to look for.
View 9 Replies
View Related
Jan 1, 2014
I would like to ask how can I get to work the index match function (if there's any formula other than this current function its fine) if i have a start date and end date as range date then another criteria for name to get my desired result. im having a hard time to explain so i attached a workbook so you can around it.
I found a formula and tweaked it but still cant get to work.
View 10 Replies
View Related
Apr 24, 2012
I have a rather large table that I need to return the column heading from.
Within the table I have a list of Names in the left most Column (A) and a list of Percentiles in the header row (row 2) (incrementing by 5%). By inputting the name and a cell value I am trying to return the column header.
Using an example;
5% 10% 15%
Bob 3.5 4.1 4.15
John 3.6 4.2 4.30
Chris 3.3 4.9 4.95
Sammy 3.7 4.6 4.7
Like I said, knowing the name and the cell value, I want to return the percentage value. So for example, Bob would be one input value, and another input value would be 4.1. I would want excel to return 10%.
I have found different suggestions using a combination of index/match but even using these functions I cannot get it to return the COLUMN value instead of a cell value.
View 8 Replies
View Related
Apr 27, 2012
I think I could get this to work but the INDEX command is not returning an index of the row like it is documented. It is returning the value in the cell. In order to get this to work, I need to return the index of the row. I need to know what row the match found the item on because the value I need to copy is going to be in column J of that same row.
I have two worksheets within 1 excel document.1 worksheet is a hand filled and excel programmed worksheet (Name is website-upload)1 worksheet is a hand filled and excel programmed worksheet (Name is website-upload)
1 worksheet is a hand filled and excel programmed worksheet (Name is website-upload)
The other worksheet is a table from a database connection worksheet. (Name is ODBC_Products)
Each worksheet has a Sku column in it.
website-upload: Column AODBC_Products: Column B
Each worksheet has a QTY column in it.
website-upload: Column KODBC_Products: Column J
Goal: I would like to search the Sku column ODBC_Products and find a match for a sku that is listed in the website-upload sku column and then when I find that match, display the qty from the ODBC_Products worksheet to the website-upload worksheet.
Notes: I add columns and delete columns all of the time on this worksheet so I would rather do this in excel vs. a macro. I figure this can be done with something like:
Returns N/A
Code:
=INDEX(ODBC_Products!B2:B1000,MATCH('website-upload'!A2,ODBC_Products!B2:B1000,0),1)
OR
Returns an Error
Code:
=INDEX(Table_database_name_products[productcode],MATCH(A2,Table_database_name_products[productcode],0),1)
Notes:
Here is an example of what I have: [URL]
The website-upload image says Website Qty column (J). That is supposed to say column (K)
View 9 Replies
View Related
Oct 21, 2012
I have a table with Dynamic Headings and Expanding rows, that's setup like below: The formula in the Qty column would produce a "0", if the result of the Index Match has a blank. For example in a different table the reference cell would have "Heading3". Therefore the results in the Qty column would be like example below. The products in the table below are like 0's and 1's to trigger the formula to calculate with the variables, or give a zero. If the Index Match found "Heading2" the results would be based on cells under "Heading2 Column" etc.
x
y
z
[Code]...
View 8 Replies
View Related
Sep 21, 2009
I am trying to rank stores based on a quantity of run outs they have. I have a list of stores in order with the run out quantities. I use the large function to figure out the rank but when you have two stores with the same quantity it only finds the first on in the list.
View 2 Replies
View Related
Apr 30, 2009
I have a list of data that I'm using the index - match function to output data based on user input.
For example, I have:
1 10
2 15
3 20
So when '1' is selected another cell outputs '10'.
However what I want is for example if 1.25 is input, I want it to interpolate to spit out the correct number between 10 and 15.
View 5 Replies
View Related
Jan 2, 2013
I have sheet full of data containing results of multiple tests on various equipment.The sheet contains many columns of data but below are the specifc criteria i want to use to extract the data. As maintenance is carried out regularly the list is always growing. I want to create a dashboard summary of the "Machines" which i will colour using condition formatting. I will list the machines in the columns and would like the rows below each machine to be populated with the results.
Column 1 Lists the various factories
Column 2 Lists the Machine
Column 3 Lists the Part
Column 4 Lists the result.
Results can either be "ok", "warning", "Alert" only
View 6 Replies
View Related
Jun 24, 2009
I'm trying to create a formula in cell f13 of my attached spreadsheet "Sample 1" that will search the 2nd attached spreadsheet "Sample 2" and return the correct serial number based on both the matching PO # (located in cell E10 on Sample Sheet 1 and in Column 5 on Sample Sheet 2) and Product # (cell A13 on my Sample Sheet 1). My current formula is not returning the correct result and I'm not sure why.
View 4 Replies
View Related
Jan 21, 2010
I'm trying to hone a quoting tool to generate an amount based on a given range and minimum charges for specified subsects of the range. If you reference the attachment I'm trying to calculate a charge in cell K15 based on values in B9 and C10 referencing the table I8:R9. What I cant figure out is how to create a minimum charge of 50 for J8:P9 (points A-G) and a charge of 95 for Q8:R9 (points H-I).
View 2 Replies
View Related
Jul 11, 2012
I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies
View Related
