I have a linked document, only 2 sheets. On the first sheet there is a column for + or - signs, I need a formula for the second sheet to show the + as a 6 and the - as a 5 instead of just the symbols carrying over.
View 3 RepliesLotus 123 had a function where you could graphically, in a cell, show plus symbols(+) or negative symbols (-) for the value of the data. For example if you had a column of numbers that you calculated from the previous year that indicate the change, Lotus, in the next cell would allow you to graphically display the symbols that indicate the strength of the change. So if your result was a positive ten then ten plus symbols would be shown. If it was -20 then 20 negative symbols would be shown. Now the numbers I am looking at could be 600,00 and I believe there was a way to to proportion the symbols for example for every 100,000 put in one symbol so the result would be 6 (+) signs.
View 5 Replies View RelatedCan i find a list anywhere of the new Excel 2007 ALT numbers to give the symbols eg Alt0186 = the degrees symbol in 03 but doesnt work in 07?
View 10 Replies View RelatedI am looking to remove numbers and symbols from a single cell.
For example, I start with something like:
Cell A1: M. Flank1, T.D. Chang1*, T. Person2, J. Doe3
Cell A2: T.R. Money1*, Y.R. You2
...
and I want:
Cell B1: M. Flank, T.D. Chang, T. Person, J. Doe
Cell B2: T.R. Money, Y.R. You
...
And, there are about 300 more, with varying number of people per cell.
I'm not great with Macros, so if there is a way without macros, that would be good, but, if a macro works best, I can give it a shot..
I would like to easily replace every character in column A with a blank, with the exception of - and a number. I am trying to get rid of all letters,:, / and other miscellaneous characters without having to delete them one character at a time.
View 7 Replies View RelatedIn my Excel 2010 workbook I wen through File > Info > Check for Issues > Inspect document. But as it's shown following, it doesn't show anything. Why?
Capture.jpg
Field A which I need to convert into two cells.
So I would have two columns for which would give me the split of A
A) 6210220121120
What this needs to be is 62102 in one field
The other field it needs to read as a date (which is backwards) and this would be: 02/11/2012. As you can see that is how the field is.
Last four digits is the DD/MM backwards and the year is forwards.
I would like to create a formula that will sort the numbers in column B, there are also equal numbers in this column
The difficult part is that there is text in column A, and is linked to the numbers
So if numbers are sorted the names should be sorted in the same way as well.
I have this worksheet with 2 buttons and 2 textboxes.the first button is named search literally to search the items inputted in the textboxes and the second button is clear which clear all the inputted items in the textboxes and the search field. I manage to code those things however I have a main problem. How am I suppose to linked a checkbox with those items?
For example I searched this particular item so the checkbox corresponding to that item must show up in the left most column of it. and if I searched multiple items those checkboxes must show up too. I am having a hard time coding and trying since I am new in vba. I also attached a sample worksheet. I am using excel 2007.
Search.xlsm
I am processing a fair few Invoices, which are being sent to me via e-mail as excel documents, very often they contain mistakes, a decent amount of mistakes. Usually the prices are wrong.
I keep track of every single entry on the invoice on my own document - Tracker, which I consider to be the superior/more correct document to the Invoice presented to me by my contractor.
Both of the documents have a reference number, which is a specific docket number, and horizontally, in the invoice, there is going to be a price for this docket. In my document, there is going to be a separate column for the total price.
Is it possible (I guess with VBA) to check for mistakes in the Invoice, but use the Tracker as a reference for this check.
Tracker has
columns
A - Name
B - Department
C - Date
D - Docket No.
C - Total price for the docket (calculation of E to Z)
E to Z - all smaller entries
Invoice has
columns
A - Date
B - Docket No.
C to E price for that docket, but it is spread, because departments are separated out, so each VAT account can be charged accordingly. I guess it is possible to do a separate column for the price, if it is easier to do a script that way.
Basically, I need to check if in the Invoice document, the price (C to E) for Docket No. (B) is the same as the price (C) for the Docket No. (D) in the Tracker.
I would like the wrong entries to be highlighted on the Invoice Document, so I can see straight away, that this needs attention.
Not always the price is wrong, sometimes the Docket No. is spelled incorrectly (Dyslexic contractor), hence the highlighting.
I need a script that will turn a excel doc into a txt doc. Thats the easy part. The hard part (at least I think it is), is I need it to be in a certain format and I'll do my best to explain that fomat below.
View 9 Replies View RelatedI am trying to show the all possible combinations of a set of numbers in Excel, in my case I think permutations are more appropriate to use. For example: there are three numbers 1, 2, 3 I want to show results like:
1, 2, 3
1, 3, 2
2, 1, 3
2, 3, 1
3, 2, 1
3, 1, 2
The functions in Excel available only give the total number, but I want to see these combinations!
I want to have a cell report the sum of a column and have that sum change depending on which values I have filtered on another column. I have a cell reporting a sum of times in column E, but if I filter Column F to show only jobs for 1/16/09, I want that number to display the total time for just those shown. At this point, it just shows the total regardless of what is filtered.
View 3 Replies View RelatedI have over 2000 cells like the following
S304
S205
S204
S306
S207
and so on
Is there anything I can do to show just the numbers and not the S at the start without me having to delete each S individually?
I need a formula to show the numbers as they are when they are below 30, but when they go above 30 I need it to display 30 every time. I have attched a file.
View 3 Replies View RelatedI have a number format that I need assistance with:
The number format I need is 1234-000 or 1234-001
The normal number format is 1234-000, very rarely does the 1234-001 be used. So I would like the number format to left fill the left section 1234 and right fill the right section 001.
So I have a bar chart with numbers as its data labels...so each bar is divided into 4 colors equaling to 100% ...how can i show percentages next to numbers in the chart...so for example if a bar equals to 200 and each color is lets say 20, 60, 40, 80 ...i would like to show these numbers as well as percentages..i know we can do this manually by inserting a text box but the percentages might change quite often and i dont want to go through the hassle of calculating and changing them each time.
View 1 Replies View RelatedThe current method I'm using to get the results I need in Excel are a bit manual and excessive. is a simple all in one formula for what I'm trying to do,
The data is 3 rows. We can also assume the data is in the first three columns starting from A1.
698
885
499
As you can see in the above set from 0 through 9, the numbers that are not listed are 0,1,2,3,7
And As you can see the numbers that are listed are 4,5,6,8,9.
How do I find and show which numbers from 0 - 9 are not in the set.
How do I show the number that are listed in the set Example:
Note: the special characters aren't needed.
698 4,5,6,8,9 --- 0,1,2,3,7
885
499
Note the the evaluation is for every three rows. So the three rows in the example are from a table with 150 rows. Each row begins a new evaluation for the next three.....Example:
698 and the following two starts the next set
885 and the following two starts the next set
499 and the following two starts the next set
and so on ......
Over in the following thread
[url]
you can see we've hit a problem with the Calendar Control object.
I submitted a workbook which has an Activex calendar control embedded on a User Form. On my PC everything appears as you'd expect, with the calendar showing the individual days in the calendar matrix. However when the user loads the form on their system, although they see the calendar as you'd expect, and they can change the month & year at the top of the calendar, they don't see the individual day numbers, 1,2,3 etc. within the body of the calendar.
if i had a group of numbers , for example, the scores would be 30, 40 , 50 , 60 , 70 and 80 , how would i group that. like it would show me how many scores are between 30 and 50 , it would show up as 3 , then between , 51 and 60 it would show 1
View 2 Replies View RelatedWhat formula can I use to return the value in column A if the value is found.
Something like:
=LOOKUP($M$1,$B$18:$O$31,give the value in Column A of the row of where the result is)
I'm trying to write a macro in Excel that would change any number greater than 10 in a spreadsheet to say "+10"
View 9 Replies View RelatedLets say cells A1 to A5 contain these lines of information:
Till 174 (T0215) - till keeps turning itself off.
Till 245 - stuck on windows screen
116 - keyboard is unresponsive
Berkel Scale is constantly beeping
ped not reading cards Till 156
How can I show only the numbers from these cells (i.e. B1 will be 174, B2 will be 245 etc...)? As you can see the number isn't always in the same place, and doesnt always have the same characters either side.
How do I format numbers so it will show the actual first digit, and the rest as x?
so that $1,234.56
will appear as $1,xxx.xx
or alternatively,
$1,234,567.89
will appear as $1,xxx,xxx.xx
I would prefer to do this with custom formatting rather than VBA,
(this is so I can generate sample reports for prospective clients, without showing the real numbers in the tables)
I have a rather large report full of data, 10+ columns contain a RANKING column, and these ranks, 1-10, are assigned by a % bracket:
1-20% = 1
21-40% = 2
41-60% = 3
61-80% = 4
81-100% = 5
101-120% = 6
121-140% = 7
141-160% = 8
161-180% = 9
181-200% = 10
There are several hundred rows in each column that all need individual ranks. My first thought is to program a if then else statement for 1 to 10 with a % limit range, but this isnt feasable as i would have to program a separate if statement for each of the many hundred rows, or do one heck of a fancy loop that i just cant contemplate (as the rows are split and sepperated... no solid uniform place for the data to be plugged.) What is the best way to go about this? I'm at a total loss of ideas with my knowledge of excel.
Is it possible to just show numbers greater than an amount in a pivot table?
View 3 Replies View RelatedThe list columns 5,7 and 9 has number entries.The userform has 3textboxes.is it possible to link total amount of this numbers result into the textboxes.Like column 5"CZ" entries total will showup in textbox10,column 9"DD" = textbox14
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim a, i As Long, ii As Long, b(), n As Long
ListBox6.Clear
With TextBox2
If .Text = "" Then Exit Sub
If WorksheetFunction.CountIf(Range("cv:cv"), .Text) = 0 Then
MsgBox "No Entry !"
TextBox2 = ("")
Exit Sub..........
I want to show numbers on my excel spreadhseet in thousands. However, the challenge is I want to show negtive numbers in red within brackets. For instance, I have a number -104,784,089. I want to display it as (104,784) in red color. Similarly, I want to show 577,090 as 577. Is there a customer formatting I can set up in excel that do that?
View 2 Replies View RelatedHow do I truncate a range of numbers where a number will not show more than 2 past the decimal ....and this be in vba as part of a macro.
View 3 Replies View RelatedI am trying to find the right format that will show a variety of account numbers properly.
I have these types of numbers displaying like this right now:
9.04585E+13 (should be 90458524211818)
785656.001 (showing properly)
NRDE1312089 (showing properly)
SCGA 396.00 (showing properly)
The formatting is set to general, which works for all but the top type of account number. I tried setting to a custom format like "#.#######" ...The only problem with that format is that the "." shows up whether there is a decimal in the number or not. What's the way around that?