I'm trying to graph my temperature readings.I put my readings in 1 page in order for me not to use many pages when Im printing.
Is there a way that if I graph my temperatures it will give me a continuous graph?
1. I have a very long list of values which exceed 1000 readings. I would like to calculate the averages in blocks of 10.
2. The following is a very challenging query:
I have the following readings
From To Value
0 4 55
4 12 64
12 21 53
21 31 34
etc..
I would like to get the following outputs
From to Weighted Value
0 10 ((4x55)+(6x64))/10
10 20 ((2x64)+(8x53))/10
etc
I have a list in excel 2003. Two columns of that list have formulas on them and the last column contains a formula that finds the minimum value and the second lowest value on a certain column. The data I am checking for the minimum/second lowest spans from H9 To H61 for now and the formulas just doing fine with all the conditional formatting. How could I manage to always pick the last 53 rows of the data base which has 1000s of readings without having to change the range everytime in order for my formulas to work properly?
View 9 Replies View RelatedWorking in Excel 2013......... I take 3 readings per day, I would like to see the daily average per day
In cases where the data is blank or "0", just average the 2 readings.
Sample Data
Date Speed
6/1/20142560
6/1/20142550
6/1/20142558
6/2/20142554
6/2/20142537
6/2/20142532
[Code] ..........
I'd like to try and use an array formula to return the minimum temperature between two dates. Say Column A holds a list of dates. Column B holds the temperatures for each of those dates in column A. Lets say that I want to return the minimum temperature between 10th Jan 2007 and 12th Jan 2007 with the daily temperatures being 9,10 and 11 respectively. I used the following array formula to return the maximum temperature between two dates and it succesfully returned 11: {=MAX( (A1:A10>=DATEVALUE("10/01/2007")) * (A1:A10<=DATEVALUE("12/01/2007")) * (B1:B10) )}
However when I try and use the MIN forumla the answer I get was 0 when it should have returned 9: {=MIN( (A1:A10>=DATEVALUE("10/01/2007")) * (A1:A10<=DATEVALUE("12/01/2007")) * (B1:B10) )}
I have a sheet set up with date in Column A, time in column C and numbers in column D, starting in row 2 down. I made a pivot table with the dates grouped by day, 7, to show a week and I can group the time by hours, 6am, 7am, 8am. but what I want to do is group the time for times between 2 times, like from 6:00 AM to 10:00 AM, 10:01 AM to 2:00 PM and 2:01 PM to 8:00 PM, what I am wanting to do is group by week, group by the times above and average the numbers for that time. Is there anyway to do this in a pivot table? Or some other way? this is for use in Excel 2003
View 2 Replies View RelatedLooking for a formula to average rows of blood pressure readings. Column H contains readings as general format, e.g. 120/80 Have tried numerous formulas using LEFT and RIGHT to isolate #'s to sum/average with no luck at all. Compounding factor is that both #'s can be either 2 or 3 digits.
View 8 Replies View RelatedI have attached the table with the values and have a red font for problem area.
I need to increase the cylinder filling temperature from 40deg.Celsius to 50deg.Celsius if possible.
O2 Cylinder filling.xls
I have an Excel document which receives data dump from a weather website cells B1:I20. I need the temperature and dew point from cells B3:I3, however the data is returned in a "Temperature / Dew Point" format. To use the data, I separate the Temp and DP into their own cells B22:I23 by:
View 2 Replies View RelatedI have a table with average temperatures(120,125,130...220) on the vertical axis and equipment sizes across the horizontal access (size 1,2,3...11). At the intersections is the amount of heat given off the equipment. This table is used as a reference for another sheet in the same workbook.
Basically what the sheet is for is to look up the average temperature of a piece of equipment (given the size and exact heat given off). In order to do this, I need to interpolate using the 2 closest energy values and their associated temperatures. There's a better explanation in the file and it makes for sense when you're looking at it. Attached is the table.
I had 4 initial temperature values and after some time i got new temperature values. Now for calculating 2nd iteration i need to use new calculated values and for third iteration values from 2nd iteration is to be used and so on.
How to calculate temperature values directly for 10th iteration without solving each iteration?
I have to excel files
1. Temperature & Humidity Reading
2. Summary
I tried to copy a date from Temperature & Humidity Reading file using the formula ='[Temperature & Humidity Reading.xlsx]Sensor 7'!$C$2 to Summary file
if the date format is like this 6/10/2013 12:00:00 AM the result is fine, but when i try to copy that formula for the succeeding dates the results is same from what i copied.
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedHow can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
I have a X-Y graph with 602 data points. My x scale is a counter from 1 to 602 and the Y is a decreasing set of numbers. When I hover my mouse over the points on the graph (I zoomed the graph) My first 3 points are all labeled as Point "1". At the end of my graph, my last 3 points are labeled 599,601,602, it skips 600.
I am using Excel 2007. Has anybody seen this before?
I am creating a graph with a wide range of values (0.06 - 300). The smaller values are barely visible on my column graph. I have tried all of the tricks I know. Any way to get the smaller values to show up instead of just hovering towards the bottom of the graph?
View 9 Replies View RelatedI need to set up a graph (smooth line chart possibly) with an (x axis) that are not regular intervals. I've attached an example.
the amounts would be (y axis) and the corresponding dates (x axis).
That would be great to start with. Then I have one of these sheets for each month, can there be a continuous graph made using each month or does it need to be individual graphs.
Davyccexamp1.xls
I want to plot a quadrant graph as in the attachment, but I can't find them. how to plot them.
View 2 Replies View RelatedI need to create a graph using the data in the following format:
Item X Y
A: 10 100
B: 20 200
C: 30 300
D: 40 400
E: 50 500
etc.
I need to annotate points with A,B,C etc in the scatter plot so that the same can be quickly identified in the graph.
I have three colums of data.
First represet company , second colum represent data1 ( x- axis) and third represet data2 ( y-axis).
I want to plot x-y graph with the company name
Eg.
McDon | 10 | 20
In the above case i want to show a round circle or dot which will be 10 right on x axis and 20 up on y axis and near the dot i want to show McDon as company name.
See that attachement... Graph is coming well.. but i am not able to add the company name to the dots.. or pot of x and y intersection
I would like to create a graph where the numbers are grouped in such a way as all numbers between 0 and -1 are shown in one column, all numbers between -1.1 and -2 are shown in the next column, all numbers between -2.1 and 3 are shown in another column etc
The numbers are shown below
11/03/09
-2.5
-3.8
-3.9
-4
-4.1
-4.5
-4.6
-4.9
-5.2
-5.4
-5.4
-5.5.......
I use spectrometer in my reesearch. The datas are in (a, b) format in single cell. Is it possible to seperate a and b seperately? like a in seperate cell and b in seperate cell?
View 4 Replies View RelatedI want to carry out a survey in Sept, Oct and Nov. I will asking 1000 random people in each survey what is their personal favourite--- iPhone, Nexus or Blackberry. Counts of each phone type is then divided into male and female.
Now we have three variables: gender, phone type and month. Is there any way I can present 3 variables on X, Y & Z axes and the value at their intersection as bubble size (or colour gradient)? Theoretically it's possible but I can't find a way to do it in excel. Or anyone knows any software that can get the job done?
See attached sample file. Any way to get column graphs next to each item (horizontally), each column being the revenue for that item.
Attached File : Sample.xlsx
My macro prduces some text ang a graph on the screen and I can print the result.
Ok so far. But when I run this macro in a different screen resolution, the layout of the page is disturbed: the graph is on the wrong place and the dimensions of the graph are different.
Of course I can drag and resize the graph and include this proces also in the macro but I think this is not the right way. My question is: are in VBA commands which can fix the graph to a location on the sheet/screen and adjust the graph to the requested heighth and width?
I know that to show a tab in VBA you can write worksheet("NameOfTheTab").select
However, it does not work when the tab is just graph.
Trying to create an N1.85 graph in Excel that has irregular spaced tick marks on the X-axis. Found the following information but no luck with it. Need US measure for this semi-log (10 X N1.85) graph. Also called a semi-expo (Q1.85) graph.
The resulting graph appears to be a log graph in reverse with one scale; the column widths are smaller at the left and become larger as they progress to the right.
Info found:
A 1.85 graph can be constructed manually by establishing a series of 15 values (in the case of the example in D5.2.1) from a base measurement to the exponent of 1.85.
Step 1
Select a base measurement for the desired size of the graph. A base measurement of 1.0 mm will produce a graph to 15 which is approximately 150 mm wide; a base measurement of 1.5 mm will produce a graph approximately 300 mm wide. In the case of a 1 mm base measurement, the x-axis numbers will be the 1-15 series. In the case of a base of 1.5 mm, the numbers will be represented by the series: 1.5, 3.0, 4.5, 6.0 etc. for 15 values.
Step 2
Construct a series of columns to the 1.85 exponent values measured from the zero point. The rows representing the pressure values are linear.
NOTE - A good approximation of the above can be computer-generated by a spreadsheet programme by entering a column width established from the exponential figures by subtracting the preceding value in each case. The column dimensions are displayed in the number of standard characters able to be accommodated in the column width which is slightly inaccurate in linear dimension.
The figures below indicate the values for a graph based on 1.0 mm.
Linear scale Exponential value of linear values = Column width = linear values to 1.85 power exponential value - preceding value
1 1 1
2 3.61 2.61
3 7.63 4.03
4 13.00 5.36
5 19.64 6.64
[Code]....
I want to create a graph as showed below.
Actual graph will contain a larger/longer X-axis (40 instead of 6 readings), but no more than 2 rows af data (A and B), of which one has a seqenced number af data (row B).
Row B alo has got singular points of data superimposed over the cylinders.
I have got all the numbers ready, but I don't know whether or not it is even possible to create a graph like this.
The cylinders have values up to 45.000 (accumulated in row B), the points (black dots) go from 2 to 6.
If so, I'm having trouble selecting the correct template out of the excel's standard list of graphs.
I have data refering to acceleration of a motorcycle. it uses a calculated value representing acceleration.. each value only relates to the one before and after it, and has no real world value example:
RPM 3000 = .1169 acceleration 4000 = .121 5000 = .131 6000 = .141
Now i want to compare my acceleration vs my real world speed based on each gear, below if first gear.
RPM 1497 = 15 kph 2994 = 30 kph 4491 = 45 kph 5988 = 60 kph
So the one axis is common but the values are not equal to one another and how to get the graph to show RPM vs speed and acceleration?