I have a list in excel 2003. Two columns of that list have formulas on them and the last column contains a formula that finds the minimum value and the second lowest value on a certain column. The data I am checking for the minimum/second lowest spans from H9 To H61 for now and the formulas just doing fine with all the conditional formatting. How could I manage to always pick the last 53 rows of the data base which has 1000s of readings without having to change the range everytime in order for my formulas to work properly?
I have a sheet set up with date in Column A, time in column C and numbers in column D, starting in row 2 down. I made a pivot table with the dates grouped by day, 7, to show a week and I can group the time by hours, 6am, 7am, 8am. but what I want to do is group the time for times between 2 times, like from 6:00 AM to 10:00 AM, 10:01 AM to 2:00 PM and 2:01 PM to 8:00 PM, what I am wanting to do is group by week, group by the times above and average the numbers for that time. Is there anyway to do this in a pivot table? Or some other way? this is for use in Excel 2003
Looking for a formula to average rows of blood pressure readings. Column H contains readings as general format, e.g. 120/80 Have tried numerous formulas using LEFT and RIGHT to isolate #'s to sum/average with no luck at all. Compounding factor is that both #'s can be either 2 or 3 digits.
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create Name: Fruit
Refers to: banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
It is a product list of office stationary with codes, descriptions and quantities. Using this spreadsheet we input into the quantity how many we want of the item, all well and simple you could call the list a stationary order form.
What I would like to be able to do with this Giant list is to have a function that would extract items off the list into a cleaner consolidated form. As in, if I wanted to order some of item A, C and F, I would like for the second table to just Show ACF without every letter in between or blank cells.
I know a simple method would be to have an IF formula to return the information to a new sheet that I could simply remove blank cell rows (unordered items) and ready for print each time. But I would love to know if there is a better way this could be achieved.
I have basic/intermediate knowledge of excel and can setup the data if need be in order for the function to work, but I can't seem to find the correct function for this project.
I need to consolidate these two lists of data into one list.
First set is just a basic list of individuals with their data.
Second set is multiple entries for those same individuals. Each entry shows a subscription to a programme. The final single sheet should have one row per individual which shows all of the programmes they are subscribed to.
See attached, example sheet.
The real list is 3000 IDs, so need some kind of formula to do this.
I have a list in column L2:L352. I would like to be able to start at AD2 and drag horizontally so that AD2 = L2, AE2 = <BLANK>, AF2 = <BLANK>, AG2 = L3, AH2 = <BLANK>, AI2 = <BLANK>, AJ2 = L4, etc.... until L352 has been autofilled.
I have a large amount of data, 40,000+ rows about how students do in remedial classes including from whom they took the classes. I have pulled from it a subset of student success as relates to the separate instructors. Now I would like to extract a consolidated list of those instructors for whom the student gain on criterion based pre and post course assessments is above a specific level. I have no trouble writing if statements that will look at two types of data, the course taken and the average student increase to determine which instructors meet or surpass the criterion, but I can only do that within a list that includes all the instructors. Because there are more than an hundred such instructors, it would be easier for the dean if I could provide a short list of those that meet specific criteria. I believe that it would be an array that I should use, but I have been fooling around with this for 2 days now, and am finding myself at a series of deadends!
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
I'm currently working with 3 dropdown lists depending on each other using data validation and =indirect(). I arranged them like in a top-down approach where you have a mother-list and child-lists (categories-->subCategories-->subCategoryCriteria). The user should easily chose first a category then a subCategory etc... This part works perfectly
My question is: when a user chose in the dropdown list e.g. a category, a subCategory and a subCategoryCriteria and he now maually deletes the value in the highest level, which is the Category (mother-list), all sub level values like subCategory and subCategoryCriteria will stay. It shouldn't be that way, because it's not logical. If you turn a tree upside-down (top-down approach) and cut one of the higher positioned trunks, all lower positioned trunks will fall off as well, right? So, my question is: can I use a conditional formatting or a formula to delete or fade out the value in the lower lists when the higher list value is being deleted?
I tried to use If-formula in combination with indirect in data validation, like =IF(A1="";("");INDIRECT(B1))...just and example.
The value doesnt need to be deleted, it could also be automatically face out like white on white or something. It's just confusing for the user if he deletes the highest choice and the lower choices still stay.
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
[URL]....
[URL]....
I am aware there are people with more pressing problems than computer games and as such
I'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example: FAILED - whole row changes red SUCCESSFUL - row has no fill Tested - row changes to orange
The function below should return the value in a cell IF the string in the cell two cells to the left of it is "Nemo" Omitting the part highlighted in blue, my function returns a list of unique values...but when it's included, nothing is returned at all. Perhaps, there is an error in the syntax that I'm overlooking?
Function listUnique(rng As Range) As Variant Dim row As Range Dim elements() As String
Is there a way to create a drop down list from a comma delimited list in a single cell? For example, col A is Name & Col B is the delimited list - Blue,Red,Green (list can be different for each name). Would like a drop down list in col C that allows you to pick one of the values from Col B.
I would like to be able to compare the "standards" in Column A with the Assessment status in Column B and the Assessment period in Column C in order to generate a compact list in another workbook (ideally) or tab (if not). A list might typically contain all the standards that have been M (mastered) during a given Assessment period. I realize that filters would achieve this to a large extent but I was hoping to automatically populate another worksheet or tab.
It's a quarterly schedule for utility meter readers, divided up into days across the top, and routes/areas down the side. There's a space with each route for the employee ID to go, depending on who's doing it.
Down the bottom of the sheet, there's a few empty lines for all the available employees who haven't been allocated to a route.
On the second sheet labelled EMP LIST, is all the employee IDs. It's also got the areas they work- it's for something I want to implement later.
I can put all the employees into a single column list, then use basic DV to give a dropdown menu by each route, to assign an employee to it. This is pretty straight forward. I've also been playing with this in combination with a countif, so that employees already assigned do not appear in the list.
This is about as far as I've managed to get with it.
I need to get the employees who aren't assigned to anything to appear in a list below the routes. I'm fairly sure this is just another countif, but I'm not 100% on the exact formulas.
I also need the list in the dropdown menu to reset for each day of the quarter, i.e. if I assign an employee to a route on the 30th day of the quarter, their ID will disappear from the list for any other route for that day, but will still be there for the other days of the quarter.
So far the only way I've managed to do this is by duplicating the employee list for every day of the quarter, which is going to get very cluttered, and also makes staffing changes difficult. I'm hoping there's an easier way to do this using one data set.
I've added an example of the sheet. It's one week and it's only got about 1/3 of the routes we would actually have on any given day.
I am working on an email marketing project and i have a small problem. I have two different email list. One (List A) is a large list of potential leads. The other (List B) is a list of leads we are not supposed to market to. I need to delete every lead on List A whose email address is also in List B, so that we do not send unwanted emails to our clients.
The best way i have to do this so far is to go through line by line, which is very impractical.
In case it matters here is out list format. Each list has 10,000 + leads. Each lead occupies a row. The row stretches across 13 columns and each column holds a different variable about the lead (names, state, email address).
