Jun Gross Profit  YZAAABACADAEAF45MonTuesWedThursFriSatSunTotal
46Â Â Â Â Â Â 1Â 47Â Â Â Â Â Â 6,166 Â Â Â 6,166 48Â Â Â Â Â Â Â Â 492345678Â 505,2187,1159,4868,06413,75512,8076,166 Â Â 62,611 51Â Â Â Â Â Â Â Â 529101112131415Â 535,2187,1159,4868,06413,75512,8076,166 Â Â 62,611 54Â Â Â Â Â Â Â Â 5516171819202122Â 565,2187,1159,4868,06413,75512,8076,166 Â Â 62,611 57Â Â Â Â Â Â Â Â 5823242526272829Â 595,2187,1159,4868,06413,7559,9617,589 Â Â 61,188 60Â Â Â Â Â Â Â Â 6130Â Â Â Â Â Â Â 626,641Â Â Â Â Â Â Â Â Â 6,641
What I would like is to be able to type in a number (1-30) and have it give me the number underneath that number. So if I typed in the number 18, it would give me 9,486.
I have tried index(match), dynamic ranges, but I must be doing something wrong.
I know organizing the data differently would be easier, but I have external software that spits out the reports like this so continuously reorganizing the data would end up taking a lot more time.
This is a floowup to the issue that was originally posted as "Returning MAX/MIN values from multiple rows in a named range ". I marked that post as solved since I have worked through part of the issue and since have a different one.
i'm trying to use HLookup to find an adjusted midterm grade that's given. but i have some conditions:
If student missed exam and has a zero – keep zero. If student has a grade of 1-119 points, increase their grade 40 points. If student has a grade of 120-125 points, increase their grade 35 points. If student has a grade of 126-131 points, increase their grade 31 points. If student has a grade of 132-139 points, increase their grade 27 points.
with these conditions, if my midterms grade is 120, how would i calculate it using HLookup? i worked on it but i keep getting the #NA! error. =H4+HLOOKUP(H4,B24:D25,2).
hlookups. I have written a formula "T(HLOOKUP($H$2,Jan-Apr!$F$5:$EO$10,3,0))" where H2 is the date that I want to match on the other sheets. It works for the sheet Jan-Apr but I have 2 other sheets May-Aug & Sept-Dec. Unfortunately Im at a loss when it comes to writing the formula to include the 2 other sheets?
I have some values representing daily values belonging to a particular Week number. The week numbers appear from 1 to 6 times in the top row. I would like to get data pertaining to a particular week number (as entered in B10) from the array in the area shown in Light Yellow and from there, I would do some minor calculations to arrive at the required data..
In the sample, the week number 3 appears 3 times and is shown here. The first value I am able to get using HLOOKUP. Getting subsequent occurrences are the issue I have. I thought I will try and use OFFSET function based on the cell reference of the first occurrence of the week number to obtain the rest. I have not had any luck in that.
Basically, my issue is how to use HLOOKUP to obtain if the Lookup value is repeated in the range. Or should this be tackled using some other route?
The week numbers appear in a sequence and are not placed at random.
if B2 value (red column) of datahave tab is equal to B2 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to A. if B2 value (red column) of datahave tab is equal to B3 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to B. if B2 value (red column) of datahave tab is not equal either B2 and B3 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to H.
[code]....
i tried normal Hlookup but i do not know how combine multiple IFs to solve my problem.
I am looking to pull out an outcome based on the user inputting two criteria, below is an example:
A B C D E F G H I J
[code].....
So if the user inputted P1 into cell H2 and inputted 9 in I2, J2 would show Pass, but if they inputted P5 into cell H2 and inputted 9 in I2, J2 would show Fail.
Above formula, in cell E8 is the number 3, however excel does not recognise this and returns 1. is there a way i can get E8 to see that it is a 3 in that cell and return the correct number of rows downwards in my table?
I was provided previously with the code for a VLOOKUPS function for a project of mine by JBeaucaire. It can be found here, in the returned file he provided to me: VLOOKUPS multiple results in a drop down list.
The set up works wonderfully. But now I'm trying to accomplish something that is just a little bit different. I'm trying to to populate an array with all the results returned from an HLOOKUP formula. I was wondering if anybody had any code written that might create an HLOOKUPS function. I've tried to tweak the code provided for the VLOOKUPS function by JBeaucaire but I'm a novice, novice programmer and can only pull off simple functions and procedures.
I used a Fuzzy lookup to match the data that was shared between my two tables. I was able to run 3 different Fuzzy attempts to increase my accuracy because the source data had a lot of spelling errors and such.
Now I am at a point where I need to analyze the 3 possible Fuzzy matches. I am kinda stumped on the best route to do this and thought that an approximate match Hlookup would be the best route but I can't seem to get it to work.
Here is a pic of my table:[URL]
I am trying to match the cell outlined in red against the 3 cells outlined in green, when the best suited match is found I need to copy the green cell and the orange adjacent cells to it's left and right (ID# and Similarity). It would be best if the match threshold was in the low 90% range.
I have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
I am facing a problem using Hlookup function. I am using Hlookup to do a control check of consolidation i am doing here, however it only returns the first found value instead of all correct values (or range).
I am attaching a file with an example. In the file formula is used in Supply(S) sheet on row 73.
I have various 6 x 6 blocks which contain just numbers, in another part of the spread sheet I have a 1 x 6 block of numbers. What I need to do is to check whether any of the numbers in the 1 x 6 block appear in any of the 6 x 6 blocks.If that does occur then I want to make a specific cell increase by the times that the match happens.using HLookup but just got errors and the If Statement, although did work, went on and on and on.
Im using the following HLOOKUP formula : =HLOOKUP($B$14,$DA$15:$EH$380,2,FALSE) and I need to drag it down 365 times, but the row index num, ie ‘2’ does not increment with the drag. Is this correct – or is there a way of making the 2 increment?
I have some experience with programming, so I understand the theory behing things like loops, arrays and functions etc...Only problem is, I need to make a program at work to ease workloads and I'm afraid I have no idea where to begin.
Basically, I need something similar to a lookup, but thanks to the limit of IF statements available in the formula bar, I can't write what I need.
The program I need to write wouldbe similar to an autofill function. On Sheet1 of my spreadsheet, there are fields: Name, Address 1, Address 2, Address 3, Postcode, Area, Rep.... (The last three are the most important) On sheet two, Postcode, Area, Rep already have data entered in thier respective columns. (D3, E3, F3).
What I need done on Sheet1 is when the user enters the first two characters of a postcode, the 'program' will lookup the entire row respective to the postcode that is entered. when enter is pressed, the Postcode will copy itself from the other sheet as well as the Area number and the Rep into the empty fields in Sheet1. The other way to do this is look through a long list until the right postcode for an Area is found then assign the Rep the Contact details (Add. 1, Add. 2, Add. 3...).
I have a huge data and I need to find values through HLookup and than have to find the sum of that whole column.But when I tried to to so It is showing error as Formula broken.
The formula I'm looking for should look for the name mentioned in B2 in range AC2:AF400 and retrieve the corresponding data below it starting from D11 to D41 and continue on F7 to F34 etc.
I have a formula that looks like this: =HLOOKUP('Output'!$B$3,'Input'!$B$1:$P$300,'Input'!$A3+1,FALSE)
It is working very fine, when the cell has a value, but when it doesn't - it will return 0. So my question is: is there any way to make it return certain value or word like "No value" instead of zero?
I have an Excel workbook containing a number of worksheets. My problem is that on one sheet(BlkPick) I have Rows containing headings(Location Names)and a column containing Product names. I wish to lookup the corresponding value contained at the matching intersection on another worksheet. I have searched this forum along with google and found that INDEX & MATCH are what I should be combining with Vlookup and these work when used on the same worksheet but when I test using say MATCH alone I get an error when attempting to MATCH my result from a different worksheet.
I have a chart of numbers pertaining to progress of a project by month. The end of month dates are in a row across the top, the progress % are in corresponding rows and columns below:
I'm trying to do a SUM of HLOOKUP values to get a total progress for a given month. For example, I need to see the total progress for end of May from end of March: SUM(HLOOKUP(5.5) to HLOOKUP(1.2))=5.5+3.4+1.2 in a cell at the end of the row. How can I do this? Do I need to use another function?
Really basic question - I'm trying to get HLOOKUP to lookup a number and return text that is in another cell but it keeps returning #N/A. I know the formula works because when I change the text (that I want returned) into a number it returns the figure. How can I get round this?
Is the Hlookup funktion not included in Excel 2002? I've been trying to run basic exemples from microsoft, and ones made by myself, and I just can't get it to work. Excel just keeps telling me that's it wrong in the formula. I really need hlookup work.
Is it possible to use HLOOKUP without exact matches. e.g. < =HLOOKUP(E1,Actuals,2) > where E1 is "2009 October" and the lookup value in named range "Actuals" would be simply "Oct".
using the table above i am trying to do a three match to return a value. I am using the following formula and keep getting a #value error. essentially the formula is returning "Green"*2354. What I am wanting to return is the value 2354.
