How To Copy CF Formula To Other Rows
May 19, 2014
See the attached workbook if needed
Column G
From G2:G102 has a number in it.
This number is an average of column D:F same respective row +2
What I am looking to do is if the value in H2:H102 is equal to or greater than the number in G2:G102 same respective row go bold green.
So I did a simple CF for H2 to look at G2 and that works fine but when I copy and paste format all the way done to H102. It is comparing all the values in H3:H102 to G2 instead of the respective row H3 to G3, H4 to G4, H5 to G5 you get the idea.
I don't want to do a CF on each row in column H because it will take forever.
What is the simplest way to do this.
I think it is just about the formatting of the formula?
View 2 Replies
ADVERTISEMENT
Feb 18, 2008
I have a macro that inserts a formula on the first row and then copies it down. The problem is the row count is variable but I know it won't exceed 5000 so I just copy it down 5000. For the blank rows I get the ugly #NAME, #VALUE, etc errors.
I know there are ways to supress those error messages, but how about a way so that the macro checks to see how many rows are populated so it doesn't copy down on the blank rows.
View 9 Replies
View Related
Apr 23, 2014
I have a formula
"=IF(ISBLANK(G8),"",MONTH(G8))"
in the cell L8, and I would like to add a code that copies down the formula from L8 to the last row in column L, when the below button event from Userform is click.
Code:
Private Sub CBAddNewItem_Click()
Set drng = Sheet1.Range("F7")
'move the value without selecting
drng.End(xlDown).Offset(1, 0).Value = Me.TBItemID.Value
drng.End(xlDown).Offset(0, 1).Value = Me.TBDate.Value
[Code] .........
View 1 Replies
View Related
Jun 24, 2009
Is there a way to create a formula to add for instance 4 rows to it. I am brining figures from a worksheet titled std inventory to another worksheet. The std inventory worksheet is set up by weeks with 4 lables. So the figures I want to bring in for weeks ending are in increments of 4 rows. For instance I am working on a sheet which I am inputting formulas which read:
= 'std inventory'!M50
My next formula down I want to input would be
= 'std inventory'!M54
Is there a way to copy and paste special this formula but have it add the 4 rows on easily?
So the next formula would be
= 'std inventory'!M58
View 9 Replies
View Related
Nov 21, 2008
I have a percent value in cell E3, for example, then other numbers in cells H3through AA3. The formula is for all numbers in cells H3 through AA3 to be multiplied by the percent value in cell E3.
When I try to copy the formula entered in cell H3 to the rest of the cells across the same row, it does not copy as I would like. Instead of having all cells multiply cell E3, it will progress through each next cell. How can I format all cells I choose in row 3 to multiply the same cell, E3?
What I want is to be able to change the percent value in E3, for instance, and have all other cells automatically change values according to the percent they are multiplying in cell E3. I have about 160 rows I want to do this same thing in.
View 3 Replies
View Related
Aug 4, 2008
Need "Copy formula when Inserting rows". For instance, A1=5, B1=10 but my formula set far behind in AE1=SUM(A1:B1). So,when I insert new row, I have to go to AE to drag the formula, is there any Macro or tips to simplify it?
View 14 Replies
View Related
Feb 17, 2003
I have an array formula that I want to apply to all the cells in a column with the exception of the = variable. Haven't been able to do anything but get it in the same relation ie.
{=SUM(IF('CO Angler Data'!K7:K106='CO Am Data'!C7,'CO Angler Data'!R7:R106,0))} becomes {=SUM(IF('CO Angler Data'!K39:K138='CO Am Data'!C39,'CO Angler Data'!R39:R138,0))} in column 39 when I want it to be {=SUM(IF('CO Angler Data'!K7:K106='CO Am Data'!C39,'CO Angler Data'!R7:R106,0))}.
Can I do this easily or do I have to do it manually like I have been?
View 4 Replies
View Related
Apr 18, 2012
This formula holds good for regular offsets (7 cells).
how to copy a formula that skip rows?
How to get the values from irregular offsets...??
View 5 Replies
View Related
Apr 13, 2013
Here is my problem. I have a a workbook with 2 sheets.
Sheet 1= Data sheet; Sheet 2 = Table
On sheet 2 I want to copy down an entire row (A8:AH8) but the problem is that the number of copied rows depends on the number of rows contained in sheet 1 column A (-1 row)
So if i have 101 records (100 +label) in column A sheet 1, in my sheet 2, it must copy down the formulas from (A8:AH8) until (A107:AH107)
View 2 Replies
View Related
Apr 8, 2014
I am trying linking it and this what I am trying to do , need a formula for it.
E.g.
Sheet 1 cell J3= Sheet 2 cell K3
Sheet 1 cell J4= Sheet 2 cell K9
Sheet 1 cell J5= Sheet 2 cell K15
and so on.
View 3 Replies
View Related
Nov 15, 2009
Column A lists an account code on the summary line of each invoice. I'd like to copy this account code upwards for each individual line of the invoice so that I can summarise each type of charge by account code in a pivot table.
I'm a bit stumped as to how to do it. If possible I don't want to have to modify the data itself in any way so that I can paste new data in the each day without altering it.
I've started on the right with a CountA function for each row, which I was intending as a means to identifying the blanks rows and discount them, but it also showed up that each line requiring an account code to be copied returns a 4 and each invoice summary line returns a 9. I'm just not sure how to reflect this in a function.
View 4 Replies
View Related
Mar 20, 2014
In column A I have Product Codes, They start at A3 and go down to A169.
I need to have a formula which i can drag across from CQ3 to DH3 which corresponds in the following manner.
CQ3 = A4
CR3 = A5
CS3 = A6
etc etc.
I then want to be able to copy the formula into another place, eg CQ20 = A21, CR20 = A22 etc
I have attached a screen shot.
Untitled-1000.jpg
View 3 Replies
View Related
Dec 15, 2008
I am trying to finish off a form that allows a user to insert a row below the selected cell and copy the formula from the line above if one exists. The code inserts the line but does not copy the formulas if they exist.
Application. ScreenUpdating = False
Dim cRow
Dim j As Long
cRow = ActiveCell.Row
With ActiveCell
.EntireRow.Insert
End With
For j = 1 To Cells(1, 255).End(xlToLeft).Column
If Cells(cRow, j).HasFormula Then Cells(cRow, j).Copy Cells(cRow + 1, j)
Next j
View 9 Replies
View Related
Feb 25, 2009
I have used the following long but simple formula.
=SUM((B17*B14)+(C17*C14)+(D17*D14)+(E17*E14)+(F17*F14)+(G17*G14)+(H17*H14)+(I17*I14)+(J17*J14)+(K17* K14)+(L17*L14)+(M17*M14)+(N17*N14)+(O17*O14))
I need to copy it to numerous other cells. However I need the row fourteen values to remain the same while the other values change according to which row I'm copying it to e.g
=SUM((B20*B14)+(C20*C14)+(D20*D14)+(E20*E14)+(F20*F14)+(G20*G14)+(H20*H14)+(I20*I14)+(J20*J14)+(K20* K14)+(L20*L14)+(M20*M14)+(N20*N14)+(O20*O14))
Is there any way of doing this without changing the formula manually every time?
View 3 Replies
View Related
Feb 7, 2014
I have a report that is run weekly that shows items that have been returned over the last 3 months. The report shows the original date of purchase and the return date, but not the number of days since the purchase and the return. I need to have any items that were returned over 15 days go to a new sheet and display just those rows of information.
View 8 Replies
View Related
Nov 12, 2008
I need to get a function that can copy some rolls in a worksheet 1 to worksheet 2 by sorting worksheet 1 according to column A of that sheet. I have attached a sample of what i intent doing for bether understanding.
View 2 Replies
View Related
Sep 3, 2007
I am trying to find a way of copying values from cells that are linked to another workbook and paste them to another sheet in same workbook to the end of last row entry. This needs to be done via VBA from a button. There are 35 rows and 9 columns linked to another workbook and they don't always have values (depending on source workbook). To cycle thru each row and copy if they have values and paste them to end of last used row on another sheet.
View 6 Replies
View Related
Mar 2, 2014
b2 = a2 * 150
c2 = a2 * 145
d2 = a2 * 140
e2 = a2 * 135
[Code].....
in the first row i want to use the fill handle at 135 and drag rightwards so as to copy/retain the pattern (decrementing by 5, from multiplier 150 until 100)
how would I achieve that?
p.s I also want the formula for columns to work with the fill handle drag downwards.
View 1 Replies
View Related
Jan 21, 2012
I need a code that will copy the format AND formulas of the entire row that I have selected (or activatedwith my cursor) to each and every blank row - until it gets to the last row of data on this spreadsheet.Since any employee could have more than 1 row of data - I am using a code that inserts1 blank row after each NEW employee name.
NOTE: This report is initially sorted by employee name so that each occurrence is grouped together.REPORT SPECIFICS:1) This report reflects typical paryoll information.2) Certain columns have data that is either in text, general, or number ($) format3) The number of columns may vary depending on which PR report is being worked4) For the sake of simplicity - we can assume that the column titles will always be across row 15) Each employee name on this report may repeat several times depending on how many weeks they worked,so the SUM() formula should adjust automatically to capture all the rows of data to add up for each employee
HERE IS MY SPREADSHEET:
texttexttexttexttextformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 CSDINNECage Nick2581/7/1281$ 600.00 CSDINNECage Nick2581/16/12245$ 25.00 CSDINNECage Nick2581/23/12323$ 25.00 CSDINWPolly Cracker1781/7/12856$ 60.00 CSDINWPolly Cracker1781/16/12242$ 654.00 ARVIPWPolly Cracker1781/23/12322$ 2.00 ARVIPWPolly Cracker1781/28/12161$ 5.00 ARVIPWPolly Cracker1782/6/1284$ 3.00 CSDINSEDim Sum6871/7/1284$ 65.00 CSDINSEDim Sum6871/16/12126$ 5.00
HERE IS MY CODE TO INSERT 1 ROW
Sub InsertRowAtNewNameONE()Dim LR As Long, i As LongLR = Range("C" & Rows.Count).End(xlUp).RowFor i = LR To 2 Step -1If Range("C" & i).Value Range("C" & i - 1).Value Then Rows(i).InsertNext iEnd Sub
NOTE: See below: I will format and add formulas where I need on the 1st blank row that was createdand I need a code that will copy this particular row to all blank rows to the last.
recordtexttexttexttextcountformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 2201.5$ 300.00
View 5 Replies
View Related
May 19, 2009
I am trying to find a way to copy and paste multiple non concurrent rows of data from one spreadsheet to another.
Ex: I have a large worksheet with approx 20,000 rows of data. I need to copy
and paste every 100th row to a new worksheet.
I think this might be possible by setting up a formula and linking worksheets,
but I'm not exactly sure how to do it.
View 12 Replies
View Related
Jun 24, 2008
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies
View Related
Apr 14, 2014
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
View 10 Replies
View Related
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
View 9 Replies
View Related
Feb 2, 2014
The below code compares the Data in a Field that must be set and collect the duplicate Values in a second Worksheet.
The thing I want it to copy the rows, when a duplicate is found in Col A. editing the code below:
Original Sheet:
"A" "B" "C" "D"
Teil1A11000
Teil1B21001
[Code]....
View 7 Replies
View Related
Aug 15, 2009
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 A 3 a1
row7 B 1 a1
I'm trying to do is set up a VBA code that will take lines lines 2-4, copy the rows and then paste them in new rows every other row for the rest of the document, so that it appears as...
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 data data data
row7 data data data..............................
View 4 Replies
View Related
Apr 7, 2012
I'd like to be able to search a spreadsheet for a specific word or series of characters. Once all of the ROWS that contain the characters are found, I'd like to be able to have another spreadsheet with ONLY those rows (all columns).
View 8 Replies
View Related
Dec 13, 2006
I have 2 workbooks.
The first one (Top Ten Auto Generator.xls) ( Sheet is Summary) has 1 row (13) with 4 cells that have data. A13 with date (today formula), B13, D13, and E13 are numbers. The cell range will be the same each time the data is copied (the workbook has a marco to generate the numbers each day already).
The date doesn't need to be copied, just the other 3 cells data (in the same order) using paste special.
The workbook that needs the cell data is a report ( Dashboard.xls) that has lots of different departments each using 3 columns for their specific data. The left most column A is the date listing to match.
The column Range for my department on that "Raw Data" sheet is "H", "I", & "J" where the "H" would get the data in "B13", "I" would get "D13", "J" would get "E13" for the date that matches the other workbook.
So the way it would work, is that once the vba is run the 3 cells from the auto generator are copied, then the vba opens the dashboard.xls and looks for the date in column A which matches the other workbooks A13 date value, and then the cells are pasted into that row, but in column H, I, & J.
Here's sort of some code that I put together to see if that would be easier to understand. I'm new at doing the vba so I don't have better code.
Private Sub CommandButtonpaste2dash_Click()
'get our data from generator
Windows("Top Ten Auto Generator.xls").Activate
Sheets("Summary").Select
Range("B13,D13,E13").Select
Range("E13").Activate
Selection.Copy
Workbooks.Open "Dashboard.xls"
Sheets("Raw Data").Activate
'look for the date in column A which matches A13 in the Auto generator
Some Code For finding the right date
'once found, paste special to the same row, but in column H (the 3 cells should paste together ok)
some code For pasting into H In the same row As the found date
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats
ActiveWorkbook.Save
MsgBox "Done!!!"
End Sub
View 9 Replies
View Related
Nov 18, 2009
I need to copy and paste 4 rows individually under each of the 500 rows.
View 12 Replies
View Related
Jun 9, 2009
I have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
View 9 Replies
View Related
May 1, 2014
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
View 11 Replies
View Related
