How To Extract Dates From Cells And List Them Seperately In A New Tab?
May 11, 2009
I have set up a 'week of' calendar for a year. This allows users to enter data in a cell for the week. For example, the today would be displayed on the calendar, the 11th.
What I would like is, in a separate tab, to list (in list format) only dates with data entered.
How can I write a formula that checks a cell, and displays the data, but if there is no data, it goes to the next cell (to the right). In the new tab, I would like the data to be listed top to bottom even though the calendar is left to right.
It would also be cool if in a separate column in the new tab to display the date, but im not sure how because the calendar isn't of actual dates, but of a few cells on the top with the month, and the actual number is in the cell.
Right now I have this as a start, but it's not much...
=IF(Category!C11>"",Category!C11,"")
I have attached an image of how the calendar is set up.
I have a spreadsheet which in the first column has dates for every day of the year(for many years), and figures in the second column. I want to extract the data relating only to the month end dates. What is the best way to go about this?
The month end date may also only be the last working day of the month rather than the actual month end date
- In column A, I have list of items that take up 700 cells (i.e. the text is in cells A1, A2... A700).
- I have applied conditional formatting to these 700 cells, so some of them are now highlight YELLOW based on a criteria (i.e. cells A3, A14, A422, A654 are yellow)
- I want to create a list of these yellow cells in column B.
I have the following code that sorts each column sperately and it works, but believe this is a long way round and not the best way. I need the columns sorting alphabetically seperately and each has a header row.
I have a sheet with a date and the number of months on it which will change. I need the sheet to list the dates in a column for each month automatically: e.g. Two cells contain date “jan07” and the period “10” months. The rows A1 to A10 should have jan07…jan16 listed automatically. If I change then change the number of month to 11 I would like the rows A1 to A11 to update automatically.
Hi Guys, This has been bugging me for a bit now and I just can't sus it...
I have a sample perpetual calender that I have been modifying to fit my own purpose. The calender part works fine.
I have beside that a column for holidays, etc and then a another column for other events.
When I put the date in the holiday or events columns I would like the date to be highlighted in the calender above (different colour depending on which column it came from).
The formula I have been playing with (no success) is:
=MATCH(DATE($R$2,1,C8),$I$41:$I$65,0) - This is the Formula for the 1st column of dates.
The 2nd formula is similar, just changes the column it tries to draw the MATCH(DATE.... from...
Although this formula works fine on the sample spreadsheet. When I enter the formula on my sheet, it doesn't seem to work...
I have attached the spread sheet that I am working on.
Basically I have 2 columns each with a list of dates in no particular order (and containing blank cells too), one planned date column and one actual date column.
What I need to do is plot this on a graph, and since the number of dates has no set limit and I dont want to have to plot maybe 100 dates on the x axis, so i want to group them by week before plotting them, i.e. 10 dates for week ending 10th jan, 25 dates for week ending 17th jan etc
I have a pivot table that counts how many of each date occurs, i.e. 10 x 2nd jan, 7x 3rd jan etc etc but it does not split them into weeks.
im sure theres an easyish way of doing it so i can get the 2 lines on the graph for no. of planned dates each week and no. of actual dates each week, i just cant see it.
I have a problem for extracting dates of leave from the attendance. A sample WB is attached. In the attached WB, I want to extract date(s) on which leaves were taken.
I have a column of numbers that have certain dates in it. I want to extract the dates and then copy and paste the dates into another column. Shall I use a macro for this or can it be done manually?
I want to see if the people on list one are on list two. I need to come up with a formula that gives TRUE for each person on list one who is on list two and false for each person on list one who is not on list two. Several caveats: 1) there are people on list one who aren't on list two and vice versa, 2) the people have several defining characteristics which need to be met, and 3) dates are involved.
With respect to point three, TRUE should only appear if the people on list one are on list two and if they were employed by the organization on a specific date (ex: 3/5/1996); in order for the TRUE statement to appear in the G column, the person should not only be on list two but also be employed on a specific date. The specific date should fall within the start and end employment contract.
I have a list of dates in this format (7/20/2013) that go through several months. I would like to make have a formula that takes all of the dates from a specific month out and make a new list of those days. For example, if I have 7/20/2013, 6/28/2013, 8/3/2013, 7/1/2013. I would like to to take only the dates from July and put them in a new list: 7/20/2013, 7/1/2013.
I currently have an Excel payroll extract that populates a start date and end date via the calender control 11 user form.
What I have found out is I need to inject some sanity to this application. I can not have users select days that are outside of a pay period.
The users should only be able to select the first or the 16th of the month for a pay period start. Then they can only select the 15th or the 28th/31st for the pay period end.
What I am trying to do is have them select the month and the pay period start date, then the end date would automaticly be selected. But I don't want to have to create a bunch of loops to counter for the differing month end dates or leap years.
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
I would typically consider myself a decent Excel user, but I haven't been able to solve this one. Maybe it's just the lack of sleep now. I am attempting to combine 4 cells into one where the last cell contains a date. Below is the formula I am using:
=B3&" "&C3&" "&D3&" "&TEXT(E3,"m/d/yy")
It works when all of the cells have values, but the only problem I am having is that some of the dates (in column E) are blank. When this cell is blank the default date that displays is "1/0/00." If I add the typical, " " at the end it says the formula has errors. The need for the TEXT(E3,"m/d/yy") for the cells that contain dates is throwing me off.
I have a WAY to complicated excel form that I'm going to move to Access but I need to have this working in the interim. The form has a dynamic element, the user can choose the number of items they are ordering and it unhides the required number of text boxes. To keep the scripting down a did a little work-around to update the database using a loop through the form controls:
'Save the main row MainOrderRow = ActiveCell.Row LastRow = MainOrderRow + (ExtraOrders - 1) ' Calculate the last row ExtraOrderNo = 1
For DBRow = MainOrderRow To LastRow
' Save the text box name with the extra order number k = "txtDescriptionMul" & ExtraOrderNo & "" l = "txtQuantityMul" & ExtraOrderNo & "" m = "txtTotalValueMul" & ExtraOrderNo & "" n = "ComboBoxUnitMul" & ExtraOrderNo & ""...................
I have a list of U.S. cities and their crime numbers. The list contains roughly 8700 records. What I need to do is pull the records for 10 specific cities from that list. Exactly which cities are singled out may change from year to year. And this is something I'll need to do every year when the crime stats are released by the FBI.
I have some code that is importing data from a text file that contains ~35,000 line items and is ~50 columns wide (this part of the code is working fine).
Once the file has been imported, I need to copy certain line items to a sheet called “output”. The code would be something like this if reading line by line:
If the value in row x, column 5 (it is always in the 5th column) in “AccountList” then copy entire row and to next empty row in sheet(“output”)
The “AccountList” is separate sheet with a list of account numbers in column A with ~250 items.
I am not sure if the code to extract this data should occur while I am importing the data or if I should do it after and run through the data again.
I have data for the distances of cars journeys. I'm looking to extract the 1st journey distance for each date for each car. The car registration number is in column A.
This is an example:
Sheet1  ABCDEF1Reg number Date distance  1st Journey distance 210D1449904/01/20119.271  9.271310D1449904/01/201110.016  1.876410D1449905/01/20119.292   510D1449905/01/20119.629   610D1449906/01/20119.327   710D1449906/01/20113.185   810D1449906/01/201110.163   910D1555506/01/20111.876   1010D1555612/01/20119.534   1110D1555712/01/20111.48   1210D1555812/01/20115.628   1310D1555912/01/20115.356
Say I had a list of words, all 9 letters long and I wanted to find all the words that had anagrams of themselves (e.g. ISOPTERAN - PATRONISE) and then list them separately as a new list.
I have tried all sorts of Excel spreadsheet solutions, but I always hit a dead end.
Can anyone write some code that I could add to a module that would accomplish this? The logic would go something like this:
Start with first word, check that word against all the words in the list (column of words), if it is an anagram with another word (e.g. ISOPTERAN - PATRONISE), then both words would be extracted and pasted in a new list for the first occurrence, if while still checking the first word in the list against the remaining words it found a second match, only the second word found would be extracted and pasted in the new list. After the first word was checked against all the words in the list the second word would be checked. Then the third, etc. until the whole list was checked.
I have a column of names of people who have logged calls within a period. Some of these names obviously pop up more than once and I am wanting to report on those top 3 people who have logged calls in that period.
In short, I want the top 3 most frequent in a list.
Trying to get the list from a combobox in an online form. I'm doing this as a check to make sure what I need to be there is there. Then the macro will select what I need and move on. If not found in the list, then it will move on...
So I start thinking about it and I'm not quite sure how to do that in Forms. Does ListIndex get me there?
I'm unable to give the site because you'd have to login with a password, but here's the code I have to Set the combobox:
Set PartNumOffr0EDrop = .Document.all.Item("PartNumOffr0EDrop") myVal = PartNumOffr0EDrop.ListIndex
I need to know how to loop through the combobox and store the value of each member of the list to a variable or cell.
Basically, I need to extract data from a grid/table (11 columns wide) and transpose it into a list for use in a pivot table. It like sort of reversing a pivot table to access the original data but I only need 5 of the columns repeated for each occurrence.
I have read many internet sources but they don't seems to fit my needs. Here is a solution from a similar question posted on StackOverflow entitled "How to “flatten” or “collapse” a 2D Excel table into 1D?"
The attached simplified mock-up explains what I am trying to do. I have colour coded the data to understand. The number of rows (10) will always be the same but the number of columns (Branches in this case) can extend for many columns.
