Extract Dates And Place Them In Separate Cell?
Apr 30, 2014how do I extract dates that a person is absent in a month and place the dates in a single separate cell?
View 1 Replies
ADVERTISEMENT
How To Extract Dates And Put Them In A Separate Cell
Apr 30, 2014how do I extract the dates that a person was absent in a month and place all dates that he was absent in one cell?
View 1 Replies View RelatedExtract Text From Column :: Place Into Separate Columns
May 14, 2007I have a long column of info as below. I want to extract (the name changes)- "SEAPORT TWN" etc and also "01.30" and place into separate columns say G and H at the next available cell.
**
SWITCHLIST FOR TRAIN---Grain Spec -East
DEPARTURE TIME from WESTTOWN is 01:00
TOWN STOP---SEAPRT TWN Arriving at 01:30
PICKUPS
Terminal Shipping Burl North 460020 GRAINCAR empty Elevator Co. Ltd.
Terminal Shipping Sante Fe 100396 GRAINCAR empty Elevator Co. Ltd.
Train should leave this town with 2 car(s)
TOWN STOP---PRARIE TWN Arriving at 02:00
SETOUTS
Elevator Co. Ltd. Burl North 460020 GRAINCAR Grn w/Wht Lttrs -4 Bay
Elevator Co. Ltd. Sante Fe 100396 GRAINCAR Maroon w/Wht Ltr -3 Bay
1/05/2007 8:57:52 a.m. ...............................
Extract Information Before A Sign In Separate Cell?
Oct 24, 2013How do I Extract information before a sign "/" in a separate cell ?
View 2 Replies View RelatedSeparate Names From Dates & Commas In Cell
Mar 26, 2008I have a file with list of names in the attched file.They are not in the same format coming from the source in my company. I need only the names in the separete column without the dates and the commas. The text is not in the same format. Looking at the data, can someone help me make a formula to separate only the names from the the entry.
the data is huge and it takes lots of hours to clean this data.
I am attachign the excel file for reference.
Using If, Extract Data From One Worksheet And Place In Another
May 1, 2006I am trying to create a basic order history in excel from orders generated on our limited ERP system. I have exported the data required and imported to excel, but due to the export limitations, I can only export certain fields at a time.
This means that I have to create three sheets for all the data I require.
The first sheet has the bulk of the data and is now nicely collumned. However, I cannot get both the customer code and full customer name on the same sheet due to the aforementioned limitations.
Sheet 1 has customer code and other data, sheet 2 has customer code plus full customer name.
I have created a collumn for the customer name on sheet 1 (A3) next to the customer code (A2)
Basically, what I am trying to get it to do is as follows:
In "A3" I need to create a formula that states that if A2 contains a certain customer code, then look in sheet 2, match the code and place the full customer name for that code. Bearing in mind that we have over 395 customer codes in use, so asking for a specific code to lookup would be as time consuming as entering the codes manually.
Macro To Extract Data And Place Into Template ...
Mar 5, 2008I need to create a "purchasing programme sheet from extracted data in a different workbook.
In short I need to open the Allocation, Add stock qauntities to the the boxes with a quantity in it and if its a zero i need (Once the button has been pressed) the information to be extracted to the corresponding boxes in the Purchasing Programme Document: Description, Part Number and quantity.
Macro To Extract Data And Place Into Template
Feb 23, 2009able to press the create report button ive created, which will open a template report sheet....
View 13 Replies View RelatedExtract Numbers From Specified Place In Text String
Feb 19, 2008I have got cell A1 containing this text string:
=IF(SUM('SL-001 - AT-001-001'!R[852]C:R[856]C)=0,SUMPRODUCT('SL-001 - AT-001-001'!R[826]C:R[830]C,
'SL-001 - AT-001-001'!R[840]C:R[844]C,'SL-001 - AT-001-001'!R[846]C:R[850]C),
SUMPRODUCT('SL-001 - AT-001-001'!R[826]C:R[830]C,'SL-001 - AT-001-001'!R[840]C:R[844]C,
'SL-001 - AT-001-001'!R[846]C:R[850]C,'SL-001 - AT-001-001'!R[852]C:R[856]C))
*'SL-001 - AT-001-001'!R992C*R3C9
and I would like a macro that will extract the numbers between each instance of the letters R and C , i.e. 852, 856, 826 etc etc. in cells A2, A3, A4 respectively.
Extract Data From Files Within The Same Directory Or Below And Place In New Workbook
May 3, 2006Firstly, I have attached a file called test2 which has two sheets within it, one called list and one called 12345. This is for demonstration purposes only as in real life these are both separate files.
What I am trying to do is create a history in the file called list that extracts certain data from the file called 12345 and places it in a more user friendly format. No problems with the formulas etc, just a case of a few ifs and buts.
My real problem lies in the fact that file 12345 is only one of hundreds of files and in order to create the history, I have to repeat the process on all the other files, so that the list grows as I copy the data.
Again for demo purposes, the file "list" sits in the C root ie C:list and the job files sit in C:files*.*.
Is there a way to automate the process so that formulas or VBA residing in the file "list" searches through the C:files*.* and populates the list as it runs through them.
Extract Separate Numbers From Letters
Feb 1, 2007I've found several posts but none seem to peform this varying function:
EX12345678....Result in Col B: "EX" and Result in Col C: "12345678"
RTZZ4567.......Result in Col B: "RTZZ" and Result in Col C: "4567"
The problem with the formulas I've got specifically define - pulling let's say LEFT, 2 characters.....when, I may need it to pull 2 or 3 or 4. I found something that's smart enough to look for ONLY ALPHA and strip those out and place them into one column. =LEFT(A1,MIN( FIND({0,1,2,3,4,5,6,7,8,9},A1&"0123456789"))-1)
* I need something that's smart enough to look for ONLY NUMERIC. no matter how long the string is...and place those in Column C (like I mention in the example at the top).
Extract Data By Type To Separate Workbooks
Mar 12, 2008I have created a workbook for a co-worker. The way it works is data comes from an outside source with customer names in Column A and their Account Reps in Column H. This data is pasted into a template that I created with a very simple macro recording that filters on each Account Rep and is copied and pasted each into a different workbook. Then I had to go through each workbook (because of the info being sensitive) and create a macro that deletes the unwanted data because when the data is pasted it transfers all of the data and you can unfilter to see the full sheet.
I know there is a better way to extract data on each change in column H into a new workbook. Does anyone know how to do that? Another issue is the original data is not very clean so there are blank rows in the list. For Example:
CustomerTechnology SegmentOpportunity Dollars ($)Opportunity StatusAction Item(s)(ST) or (LT)Due dateAcct RepCustomer 1Action 1ST3/30/2008ACCustomer 2Technology 1Action 2LTTBDACCustomer 3Technology 2$10,000FindAction 3LTTBDACCustomer 4Technology 3FindAction 4LTTBDBHCustomer 5Technology 4FindAction 5LT1/31/2008BHCustomer 6$30,000Action 6LTTBDBHCustomer 7Action 7LTTBDMJCustomer 8Technology 5$10,000QualifiedAction 8ST3/1/2008MJCustomer 9Technology 6QualifiedAction 9ST2/28/2008CGCGCustomer 10Technology 7$18,000FindAction 10ST3/1/2008CGCustomer 11Technology 8$10,000QualifiedAction 11ST3/30/2008BHCustomer 12Technology 9FindAction 12LTTBDACCustomer 13FindAction 13LT3/15/2008AC
Create A Separate Function To Sum All The A1's? Below Is An Extract Of My Sub Routine.
Jul 18, 2009For Each wksht In ActiveWorkbook.Worksheets
i = i + 1
ReDim Preserve wkshtnames(1 To i)
wkshtnames(i) = wksht.Name
x = wksht.Range("A1:B2").Value
Next wksht
VBA Function To Extract Number Groups From String And Separate Them With Hyphen?
Feb 19, 2014I need a VBA function to extract number sequences from a string and separate them with hyphens In the example below cell A1 has the value 'xx2 yyy34 zz515' The code must produce the value '2-34-515' from the above example I have the following function that extracts the numbers but need a way to separate the groups with a hyphen
Code:
Function parseNum(strSearch As String) As String
Dim i As Integer, tempVal As String
For i = 1 To Len(strSearch)
[Code]....
Extract Two Separate Numbers Of Varying Length From Text Field
May 24, 2014a formula to extract the numbers into two separate fields. The text may vary in length and the numbers vary in length also from 1 digit to 2,000,000.
Data in A1 is as follows:-
Meter reading Old:1345 New:67890
Shade A Cell Red If Two Separate Conditions Apply (in Separate Cells)
Dec 3, 2013I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
View 11 Replies View RelatedSeparate Dates/times By Specifics
Nov 16, 2009Is it possible to seperate this sheet by Time - using column F, anything which is between the hours of 07:00 - 09:00 and 16:00 - 19:00? Response - column I - times up to 60 mins - 61 - 120 mins and over 120 mins
View 5 Replies View RelatedCheck To See If Dates Match In Two Separate Columns?
Apr 6, 2013what i am trying to do is look at an entire column, and see if that same date exists in the other Activity tab, if the dates match, then show the activity
here is the formula i am using, =IF($A9=Activity!$A2,Activity!$B2,"No Activity")
my problem is that i am only able to isolate one of the cells,, how do i check the entire column?
in other words, if i select two weeks, those two weeks of activity will show, if i select all weeks, all of the weeks activity will show, right now i can only get one of the weeks
my data looks like the following
1st tab
1/8/2013 - 1/14/2013
1/29/2013 - 2/4/2013
1/22/2013 - 1/28/2013
[Code].....
Macro To Copy And Place Data To Specific Place
Feb 22, 2007I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
View 2 Replies View RelatedExtract Data From Between 2 Dates?
Dec 28, 2011I have a sheet of data where I need to extract data from between 2 dates, if the result of the 2 dates are
View 1 Replies View RelatedExtract 2 Or More Dates From A Range
Jun 19, 2007I have a problem for extracting dates of leave from the attendance. A sample WB is attached. In the attached WB, I want to extract date(s) on which leaves were taken.
View 9 Replies View RelatedExtract Dates From Column Of Numbers
Sep 14, 2013I have a column of numbers that have certain dates in it. I want to extract the dates and then copy and paste the dates into another column. Shall I use a macro for this or can it be done manually?
Column A1
03.03.2013
1,02043
1,02043
1,01927
1,01988
06.01.2013
1,04778
1,0512
1,04758
1,05099
07.10.2012
VLookup To Find The Customer And The Dates And Then Bring Me Back An Asterisk In A Separate Column
Jul 27, 2007I have 2 spreadsheets. One is a promotion calendar that lists the dates that promotions on a certain product runs. The other is a shipment grid of shipments of that product to the customer.
I want VLookup to find the customer and the dates and then bring me back an asterisk in a separate column to show me that that certain week that product was delivered was a promotion week. The problem I have is using Vlookup to lookup 2 things at once (and if they match to the promotion calendar) and return me an asterisk.
Here is my formula now:
=IF(VLOOKUP(J2&" "&L2,'East Data'!M:AU,2,FALSE),"*",0)
J2 is the customer name
L2 is the week
"East Data" is the spreadsheet with all of the promotions and customers.
How To Extract Dates From Cells And List Them Seperately In A New Tab?
May 11, 2009I have set up a 'week of' calendar for a year. This allows users to enter data in a cell for the week. For example, the today would be displayed on the calendar, the 11th.
What I would like is, in a separate tab, to list (in list format) only dates with data entered.
How can I write a formula that checks a cell, and displays the data, but if there is no data, it goes to the next cell (to the right). In the new tab, I would like the data to be listed top to bottom even though the calendar is left to right.
It would also be cool if in a separate column in the new tab to display the date, but im not sure how because the calendar isn't of actual dates, but of a few cells on the top with the month, and the actual number is in the cell.
Right now I have this as a start, but it's not much...
=IF(Category!C11>"",Category!C11,"")
I have attached an image of how the calendar is set up.
Payroll Extract To Work Only On Certain Pay Period Dates.
Feb 9, 2007I currently have an Excel payroll extract that populates a start date and end date via the calender control 11 user form.
What I have found out is I need to inject some sanity to this application. I can not have users select days that are outside of a pay period.
The users should only be able to select the first or the 16th of the month for a pay period start. Then they can only select the 15th or the 28th/31st for the pay period end.
What I am trying to do is have them select the month and the pay period start date, then the end date would automaticly be selected. But I don't want to have to create a bunch of loops to counter for the differing month end dates or leap years.
Extract Month End Data From List Of Dates
Nov 20, 2007I have a spreadsheet which in the first column has dates for every day of the year(for many years), and figures in the second column. I want to extract the data relating only to the month end dates. What is the best way to go about this?
The month end date may also only be the last working day of the month rather than the actual month end date
Fill In The 3 Criteria Fields, Calculate The Result, Copy The Result, And Place It Into The Correct Place On The Table
Oct 19, 2006I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
| ID Y
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria:
>= First Day of the Month
<= Last Day of the Month
= ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
How To Separate Row Data From One Workbook Into Separate Workbooks Based On Cell Data
Apr 23, 2014I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies View RelatedString Extract - Separate First Two Or Three Letters In A String
Sep 4, 2012I am working with flight numbers and want to split out the letters from the digits. Examples,
BA1234A
BA123
EZY4566H
BE7893B
In column A I need the first two or three letters only,
BA
BA
EZY
BE
In column B I need everything to the right of what appears in column A
1234A
123
4566H
893B
etc.
Place Sheet / Tab Name In Cell
May 7, 2014How do I do this?
View 3 Replies View Related