I'm trying to come up with a formula to find and proper sum the value in a table like this one:
Month/year
1995
1996
1997
1998
Jan
3,63%
0,86%
3,5%
1,5%
[Code] .........
But the actual table goes till december and the years till 2013. For instance, if I need the cumulative index from, let's say, jan/2010 to feb/2013, I'm having trouble with this formula. I can't get excel to sum them properly.
I need a find the intersecting price values for any given height and width. From what I have read on the internet, I can use the "=INDEX( ),MATCH( ),MATCH( ))" formula. However, this doesn't seem to work because the height and width is separated into intervals.
View 3 Replies View RelatedWhat I'm looking for is a formula that will search a data table on a source tab and find a value in a column. And have the ability to function like a vlookup and display the contents of cells in the same row on a different tab. The catch is the value will repeat it's self at random interval in the data table. So for example the values are ON-1 to ON-8 and MB-1 to MB-8. Each value will have it's own tab and I want the formula to search the Source tab and capture the value in order but on the next row of the spread sheet.
View 4 Replies View RelatedProblem description: I need to put together twelve arrows each comprised of four components; field point, front insert, shaft & fletch and nock. Therefore, I have forty-eight components in an Excel table. Each of these components may differ slightly in weight. My objective is to mix and match all of the components to create as many arrows as possible of the same exact weight.
Two questions. 1) How should I be thinking about setting up the problem? 2) Which Excel function returns the results I'm looking for?
Total weight
Point
Insert
Nock
Shaft
?
100.1
109.7
20
179.1
100.1
110
I am pretty new to VBA and have been wrecking my brain and reading just about every Thread there is on this and still can't figure out why I am not getting the code to work.
I am trying to get data from Column "Sale Price", stored in Table "MasterInventory" on worksheet "Master Inventory" to populate a textbox in a UserForm by means of Vlookup.
Upon running the code below I'm getting Value Error 1004, and during Debug when I hover over "MasterInventory" it shows "MasterInventory=Empty"
Also Im trying to figure out how to do it so I can call the "userform" up from any worksheet and add the entries in the table on worksheet (Jan, Feb, Mar, etc.) for the month depicted in the TextBox "Date" on the Userform
The code looks like this:
Private Sub CBx_PROD_AfterUpdate()
'lookup value in Col F [Sale Price] based on Product (Col A [Description] in Table [MasterInventory])
With TB_SP
If OB_Y.Value = True Then
Me.TB_SP.Value = Application.WorksheetFunction.VLookup(CBx_PROD.Value, MasterInventory, 6, False).Value
End If
If CBx_PROD.Value = "" Then
Exit Sub
End If
End With
End Sub
I have a table refreshed from a MySQL database that I use to create a report. I can use this data quite well using formulas in the cells.But in order for me to add more information to the report I use without making it cluttered I need to add some data as comments.
I have created a loop that picks up some cell values that I want to use as criteria but I cant work out how to use these variables to search through the table and get the info I require to put in the comment. In a cell I would use offset/match or index/match to get the required cell value but how do I do this in VBA?
Trying to find the sum of all cells in the array described in the formula that are equal to the values inside the quotations. I used this exact (as far as I can tell) formula to find the sum of values that were NOT equal to my quoted values and it worked just fine. Any ideas why formula 'A' will not work but formula 'B' does work? I have a feeling I'm missing something simple here!
Formula A - Does not work:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000="REJECTED"),--('Master Lead Sheet'!$N$2:$N$10000="CONDITIONED"),--('Master Lead Sheet'!$N$2:$N$10000="APPROVED"))
Formla B - Works:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000"No Answer"),--('Master Lead Sheet'!$N$2:$N$10000"Disconnected"),--('Master Lead Sheet'!$N$2:$N$10000"Wrong Number"),--('Master Lead Sheet'!$N$2:$N$10000"EMAILED"),--('Master Lead Sheet'!$N$2:$N$10000"needs to be emailed"),--('Master Lead Sheet'!$N$2:$N$10000"Refund"),--('Master Lead Sheet'!$N$2:$N$10000"REFUNDED"))
I was trying to figure how to write a formula that would return the contents of a cell in a table.
Here is the situation....
I have a 10 row by 10 column "grid". the top and left side of the grid contains a random number from 0 to 9. The numbers do not repeat.
It would remind you of a block pool.
If I have two numbers, 0 to 9 , is there a way to return the cell that corresponds to the intersection of those numbers in my table?
It would be both a Vlookup and an Hlookup which I can't do.
Bonus calculation model...
100% of sales target = 100% of bonus
110% of sales target = 125% of bonus
120% of sales target = 165% of bonus
etc...
How can I solve for someone who books 107% of sales target?
I have a series of worksheets that have materials displayed as shown below:
Column A Column B Column C
Material A
material B
Material V
Material F
Total Price 123456
Material C
material B
Material V
Material G
Promo Price 123456
I would like to know if there is a formula can perform a lookup based upon the material in column A and then return the Total price in column C. For each material in column A there is a price but only 1 total price for each grouping.
I have a sheet, called "output", in which I need to complete column C "calculated values". I need to complete the table based upon a formula table (which is in sheet "formulas").
For the first row of data, cell C2, I need to take the price per order ($0.25; cell A2) and number of orders (40; cell B2) and copy data to cell B4 and B6, respectively.
Once the data has been copied to to cells B4 and B6 on the fomulas sheet, I need to copy the calculated value in Row N to the output sheet. Note that the value being copied from N can be N11, N12, N13, N14, or N15 (the one that is <> to null).
Column A:
pants A green
Pants B red
Jacket C green
Jacket D blue
Polo C white
....
I need a formula to find some value( in our case "colors" = "green, red, blue, white" ... = 20-30 values), and to return in column B, the values, like:
Column A: Column B:
pants A green | green
Pants B red | red
Modern green Jacket | green
blue winter jacket | blue
Polo white D | white
I have different product feeds (csv) and i will like to search for colors in the product names.
Is it possible to enter a formula using two summarized values within a pivot table?
For example, if the original column was "X" and within the pivot table i'm using "Sum of X" and then another for "Average of Y".
Can I then divide "Sum of X" by "Average of Y" or any other similar calculations between 2 summarized fields?
I have a spreadsheet with some calculations and the part i am interested in is data in R4 : V58
In this R4:R58, S4:S58 and T4:T58 have some rows that have False because of IF calculations that put False in some rows of R and hence in S and Hence in T.
For example, R15="FALSE" so will S15 and T15 be. Col U is based on whether the corresponding row in R is False or a number. If a Rown in R is false, the row in U= 0 else the row in U is the same as in the same row of a different column - Col I
Col R, T and U are numbers. Col S is text
For example:"
R S T U
False False False 0
False False False 0
False False False 0
55 DEF 3 15
46 XYZ 2 67
False False False 0
False False False 0
23 GEF 4 43
I want a table in another worksheet that will sort through this using a formula and print
Col1 Col2 Col3 Col4
55 DEF 3 15
46 XYZ 2 67
23 GEF 4 43
If I can define things like where the table will be placed in the new worksheet etc, that will be a bonus..But It appears I cannot understand how to do this at all..
table1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
Data Table including-
List of Identifying Code Numbers for customer invoices
Multiple repetitions of individual Identifying Code Numbers in list
Various data in table range including Various Values of invoices from different dates for each repetion of Identifying Code Number.
- Wish to find largest invoice for each Individual Identifying Code Number in the table without using a pivot table.
i have tried combining Max and Large functions with Vlookups etc.
I have a large table that I want to reconstruct. For simplicity sake, let's just says it's 3 rows (excluding headers) by 3 columns.
Item Description
1/1/2014
1/2/2014
1/3/2014
Cheese Burgers
2
3
4
Hot Dogs
5
12
6
Beverages
2
5
3
I want to reconstruct it so that the column headers become values in the table. The table headers are dates, in this case, if that gives clearer picture. So the new table would have 9 rows, (3 rows of data, excluding the header times four columns).
Item Description
Date
Quantity
Cheese Burgers
1/1/2014
2
Hot Dogs
1/1/2014
5
[Code] ....
The above example is sorted by date but I would be indifferent if it's sorted by the Item Description.
Is there an easy way to do this? Pivot possibly? Again, my data table is large: 36 rows x 181 columns. Using the copy/paste/transpose feature is pretty impractical.
how can i sum pivot table filtering some values in other table. if i change filter, sum is changed
View 1 Replies View RelatedVlookup a table, to another table that has multiple values.
E.g.
Table
GPASP002
Look up table - need to return second coloum but not the first value, all the values?
GPASP002 KZASP100
GPASP002 KZASP500
GPASP002 KZASP600
GPASP002 KZASP501
GPASP002 KZASP502
GPASP002 KZASP601
I have this list of companies (about 50) in one work sheet. If a certain company has sales or costs it will appear under the company name, as either Products, Installation or Freight. It looks something like this:
Company
Sales
Costs
[Code]....
What formula should I use the find the installation that belongs to that certain company? And not all companies has a line that say installation.
One aspect of my Excel-based project involves comparing the operator-entered part number (in Excel) to a predetermined list of part numbers in one column of an Access database table. Right now, my program is telling me that every part number entered in the spreadsheet (50+) does not match any part number in the database, which I've verified to be incorrect. I've checked that both the spreadsheet part number and the database part number are of the string datatype.
To the best of my knowledge, my looping logic seems valid and robust. To the best of my knowledge, there are no hidden characters in either the database cells or in the spreadsheet cells causing this apparent mismatch. I'm completely stumped at this point as to why my program doesn't detect any matches between the spreadsheet and the database table. Below is the Sub containing the code for checking that the part numbers match:
[Code] ....
This issue seems to be a hybrid issue between Excel and Access with (to me) more of the issue on the Access end.
I am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
I have data similar as shown in the following:
A1A11
B2AA1122
C3B22
D4C33
D44
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
A111
AA1122
B222
C333
D444
the third column always will have at least the same letters as the first column, but new letters/entries can occur.
compare some list of values in order to fiind the common values.
View 1 Replies View RelatedI have a table below that looks like this:
LOC
# of days
DTX
3
RTC
3
PHP
12
IOP
12
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1
DTX
$ 1,292.00
2
DTX
$ 1,292.00
3
DTX
$ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
I have data that looks like this:
day# id amount
1 56575 0
1 56675 0
1 56680 0
1 56683 0
1 56681 0
1 51810 0..............
How do you write an excel macro that looks at the number in the first column (day #) and finds all the duplicate id#s in the second column that are in day 1and adds the amounts together in the 3rd column then writes the first column number (day#), second column number(id#) and the third column (sum of the amounts of duplicate Id#) to an new worksheet. Then the macro would loop through day #2 and do the same thing. Notice that the values in the id column are unique in this data set below this is how I would like the data to look. I have accomplished this in a pivot table but my problem is I need a cvs file to export the final data into an external database which is why I need a macro.....
DSee the attached.
The current spreadsheets add up each persons totals by matching the name in each tab with the name of the person who won the job located in current orders tab.
BUT.....If two salesman pair up on up on a job then the formula doesn't recognise the joint name. eg Gary/paul in row 69 (current orders).
I need the totals to half the job and add it to the salesmans total accordingly. There is no 'Paul Tab' as he is our MD and doesnt have a target.
How do i change this code so i can find the next available row in a table. At the moment it finds the next available row after the table. The table starts row 4 and finishes row 311 however it could grow. There is data in other columns in the Table so i need to stick to searching only column B for the next blank cell.
[Code] .....
I have data spread across 76Rx68C - this table is raw data with no logic to placement of values within .
In another sheet i have one row of values.
I need to know if each of these values appear in the data spread. - a simple YES / NO would suffice - i dont need to know where exactly are they appearing in the data table.
I'm having trouble coming up with the proper syntax to find the last (empty) row in a table. I already have the code figured out to add the row, but need to identify that cell as the paste target.
Originally, the 3 tables on this sheet were in different columns (each table is only a one column listing of part numbers). But then when I would attempt to delete something from one of the tables, it would delete the entire row, which of course affected the other tables as well.
So, I arranged the Tables so that they are all in Column A. Now a deletion shouldn't affect the other tables. But with that came another problem, the usual method (End(xlUp)) to find the last cell no longer works. I need to find the last cell in a specific table, not the last cell in the column.
Code:
the_sheet.Range("Table3" & last_row_with_data).PasteSpecial Paste:=xlPasteValues
Here is this section of code in its entirety:
Code:
Public Sub SKU_Fix()
Dim lrow As Long
Dim the_sheet As Worksheet
Dim table_list_object As ListObject
Dim table_object_row As ListRow
Dim last_row_with_data As Long
Dim Log2 As String
[Code] .........