In Column A, each cell up to A2197 has had data manually entered. A2194 has data AD453302085PIND, A2195 has data AD453302086PIND, A2196 has data AD453302087PIND.
Following on from A2197, I need to increment each cell by one number. I have modified the following solutions which were provided yesterday ="AD"&RIGHT(LEFT(A2196,5),3)+1&"PIND" and
=LEFT(A2196,2)&123+ROW(A2196)&RIGHT(A2196,3).
In my spreadsheet, each row of data in Column B starts with 3 numerics (e.g. 001) followed by some text. For example:
Cell B2 contains '001 - Text for this cell'
Cell B3 contains '002 - Different Text for this cell',
Cell B4 contains '003 - Different Text for this cell', etc.
I have hundreds of rows which follow this format.
I have had to insert several rows in my spreadsheet in between existing rows which has thrown off the numbering in the first three positions of my Column B cells.
Is there any way to update the data in Column B so the text data in each cell is retained but the first 3 numeric values are updated and again sequential?
I've got a column of IP addresses and want to increment the last octet. Starting with IP block in column A, I select those and drag to auto-fill to the right. Some cells increment and others don't. I'm using Excel 2003 on Windows XP.
View 3 Replies View RelatedI have a column that looks like the following and I need to add the numbers:
27 skids
31 skids
56 skids
13 skids
The unit "skids" is constant. The answer I am looking for is "127" or "127 skids"
I'm working on a spreadsheet with about 400 rows and 10 columns. All the numbers in the columns are formatted as text, which doesn't allow me to use AutoSum. I have selected the cells and formatted them as number with no decimals, but AutoSum still doesn't work because the formatting hasn't changed and they're still formatted as text. I know if I double click each cell, the cell changes the format from text to number, but that will take a lot of time to change 400 cells in each of the 10 columns. What can I do to quickly reformat the cells from text to number?
View 1 Replies View RelatedA
B
C
D
E
F
G
23445566894 Brwn pdc aft
Cat1
45687930596
$5
45687930596 Gld wdget adi
Cat2
23445566894
$6
In the example above, I would like to do a vlookup in column C that matches the digits in column A to those in column F, with the output being the corresponding value in column G. I believe it involves the left function but not sure how to really use it here.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
Im trying to write a very basic macro that will let me increment a cell value from 0 to 20. in this instance im trying to make cell a40 change from 0 to 20 and im trying to make it increment by 1 every time and then go back down from 20 to 0. In this code i need to be able to see the changes happening as i will be showing the incrementation on a graph.
View 2 Replies View RelatedIn my workbook I have a summary sheet and then will have approx 200 tabs (worksheets) after the summary sheet. Of those 200 tabs each tab is exactly the same and i need to pull the exact same data from each and every tab into the summary sheet.
e.g. My tab numbers will be 01 through to 200. I am currently using as a formula: ='01'!$L$6
Obviously pointing to Tab 01 and in that tab Cell L6..
i need this to automatically change when i drag the cell down to:
='01'!$L$6
='02'!$L$6
='03'!$L$6
='04'!$L$6
..
='200'!$L$6 ... and so on.
I generated my urls to online photos, I referenced cells where some are only numerical (ex. 479) while others contain a numerical/text mix (ex. 3014-RACK). Here is my url code in excel...
View 10 Replies View RelatedI have a spreadsheet where i do need to count cells values that are formatted as text but i do need to ignore the real text in some cells, in this formula i do need to add values depending of the adjacent cell.
I have attached a example : New Microsoft Excel Worksheet.xlsx
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedRemove the texts, punctuation marks, i.e; hyphen's, slashes, colon etc from a particular column and get me only the numbers?
Attached is the sample sheet : Fleets NOVEMBER 2012.xls
The numbers that we see in Column C is very mandatory. These are the Receipt numbers and that's exactly what i need. I do not need these texts along with it....neither the punctuations..
regarding splitting numbers from text that are in the same column. Is there a quick solution to my problem.
Text to columns won't work because the data is not the same.
See below the an example of my data: ....
I quickly put together an inventory form on our company server where employees can essentially just enter part numbers, quantities, and a few other things, rather than write everything out. So what might happen is, an employee puts together a list of 10 items with their respective quantities, but a few days later, another employee pulls up the spreadsheet and needs to add a few more of a part already listed. Protocol for the company is to do a separate line, rather than add it to the line where the item is already listed. What I am trying to do is, create a separate sheet within that workbook, that simply lists the part numbers, in order, with their total quantity. I have attached a basic spreadsheet showing what I would want, with a tab at the bottom labeled, "What I want."
View 4 Replies View RelatedI'm setting up a workbook where users will select a saved workbook from a network drive (using Application.Dialogs(xlDialogOpen).Show); the macro will then open the selected file and pull data from select columns in that workbook and paste it into the summary workbook which holds my code.
The column into which the data will be pasted will vary by source workbook, so I'm using application.inputbox to have the user provide the first column into which data should be pasted for the selected workbook. Each workbook will have data that needs to go into two side-by-side columns, so rather than asking the user to input another alpha column header, I want to just increment the original input to represent the next column, so I can use that in my code.
Since the data is coming in as text, does anyone have an eloquent way to increment it, taking into account the rollover each time the final character is 'Z'? I thought about defining the inputbox variable as a column and using offset, but that isn't an option in the dim/as autocode. This code will primarily be used in Excel2007, but ideally would also work in 2003.
I have cells with '1 hour' , '5 hours' , '2.5 hours'.
All I want to do is add the numbers and ignore the text.
I am trying to find a short way of creating a list using the drag down tool. Normally this isn't a problem when the numbers are at the end of the data, however they are in the middle so the drag down tool does not like it and will only copy the same data into the cells below.
Eg. the list I am creating goes as follows:
Dicso 80Gb: Cyber Records Barcodes: CR 001. ai
Disco 80Gb: Cyber Records Barcodes: CR 002.ai
Disco 80Gb: Cyber Records Barcodes: CR 003.ai
...and so on.
How do I create the formula to recognise that I want the number within the text to increase by 1 each time?
I was recently issued an alphanumeric range that I would like excel to manage for me. The alphanumeric numbers contain 5 characters. The basic pattern starts zero to nine, then A-Z, then 10. For example, A0500 through A0509, A050A-A050Z, A0510-9, A051A-A051Z, A0520-A0529, etc.
View 4 Replies View RelatedIs it possible to increment / decrement cells using wild characters? I've found myself needing to increment values at different position, for e.g. :
ABC-###-FR05-AB
ABC-222-FR##-AB
C##445-KJ
where I would want to be incrementing # placeholders. It would help if I can give it a start number, and the increment amount (which can be different than 1).
What about possibly extending it a bit more to include two or more place holders at the same time as follows:
ABC##- FR*** (where # would have its own starting number and increment value, and * would have its own).
So quick sample of data :
B74
B74
9
94
1
948
B74
So if I have this data in a column you notice they have different length. Now I want my macro to add leading zeros until the length of all occurrences is 4.
I know for numbers you can do a range.numberformat = "0000".
But this won't work for B74 because (obviously) it will not be recognized as a number.
I know in a formula you can do it with the command TEXT. However I do not want to create extra columns I want something to alter it in place just like the numberformat does but then for numbers and text.
I have data listed in column A. The data appears in text, blanks, and phone numbers....all in different rows.
I need to capture only the phone number and 3 rows above it no matter what the text says or how many rows inbetween each phone number. Then proceed to copy and paste it to a new sheet into one column.
This needs to continue until i reach the end of column a.
Eg. row 1: the fox
row 2: the pig
row 3: animals
row 4: water
row 5: land
row 6: (780) 111-2222
i need to copy rows 3-6, paste to new column and then continue down column A looking for the next chunk of data to copy and paste.
So it would turn out to look like:
row 1: animals
row 2: water
row 3: land
row 4: (780) 111-2222
All in column B
I have the following data in column b and I would like to extract into individual cells.
I would like to extract upto the first number, number text after first number etc
I have several rows and the data lengths are variable
Liverpool FC 2 Sheffield United 1
Manchester United 0 Everton FC 3
Middlesbrough 2 Manchester City 0
Norwich City 2 Chelsea FC 1
Oldham Athletic 1 Crystal Palace 1
Queens Park Rangers 3 Southampton 1
i have excel sheet with name labels.i want count how many times user repated along with his branch code. acctully am done this using this formula, but not getting what am exepected.
Formula in B1 is ="JSK-SW-1"&(countif($A$2:$A2,$A2))
output is value is incremented, but i want text also be change.
A B
Name Count
Sateesh JSK-SW-1
Rajesh Raj- SE-1
Sateesh JSK-SW-2
Rajesh Raj-SE-2
Anil JAK-DE-1
I have a cell with a value of, Text 1 and in the next field I want it to display Text 2, then text 3 and so on.
Is there any way of doing this? I guess I am looking for something like a1+1, just a shame it doesn't work.
I have to put different ticket numbers for a company with some code. At present, I am manually copying and pasting data (which is too difficult as sometimes, tickets may be more than 300). So, suggest some easy way out, keeping in mind that I am new to Excel. I want this as output.
Company Name= New Horizons
Code=CS/02
Number of Tickets=1/300
Here, I want to increment number of tickets automatically like 1/300, 2/300, 3/300 till 300/300 and all the other entities like Company name and code should remain same. My rest of data remains same except number of tickets through out. I also have to print same data.
I have a spreadsheet which reads:
A1 E012345678
A2 126789433
A3 ABCDEFGH
A4 CDEEGFFH
A5 E0456783
A6 98765432
etc.
I need only the the data in Cells A1 A5 etc. which means the 3 cells below (A2, A3, A4 ) should be deleted. A5 I need the data, and then A6, A7, A8 I do not need ... A9 need and so on.
the data should be in in one below the next with no spaces in between.
Data is only in column A.
I have a table of data in which a lot of data appears as " "999" Then 'fix this, not working, formats numbers with decimals as whole numbers
c.NumberFormat = "#,##0 "
End If
' now format to line up right justified
[Code].....
I have cell A1:A25. each with a number, and the same text "Hour(s)" So cell A1 would be 24 Hour(s) and so forth down to cell A25.
Due to the sheet being large, I can't just insert another column to list the text. I need for cell A26 to sum the numbers ignoring the test in the cells. I searched to forum, but didn't exactly find anything that works correct.
I want to separate the text and numbers into two different cells. Basically, I have the entire drawing details in one cell and I need to split it up, e.g. I have:
KEEP PLATE 902 4 0002
STOOL 525 4 0199
PACK PLATE 525 4 0200
PACK PLATE 525 4 0201
PACK PLATE 525 4 0202