I am trying to get my User Form to work whereby I choose a pre-determined date entry. I have tried some coding but cannot get it to work. What code I need to add in VBA for this to work? I have tried to alter the time entry from my previous post that was solved but are doing something wrong.
View 11 RepliesI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I have to report Actual Headcount every month. Since I cannot add the Headcount numbers in the FY Column. What is the best possible forumula I can use to pick the last month's reported numbers into the FY Column.
For example.
I have 13 columns (A - M). Jan - Dec and the 13th column is the FY number.
This month, I am reporting March numbers in Column C
Column D through N (Apr through Dec) are emplty
I need Column N (FY number) to read Column C and enter the value from that cell.
similarly when I report April numbers in Column D next month, I want Column N to read April numbers and ignore the prior months.
I tried using the min/max function but since h/c fluctuate every month I could not use that. I could use an "if" statement and go back every column but that seems to be inefficient way to solving for this. Any thoughts?
BTW, I am using Excel 2010
I have a list of dates going through several years of data - month ends and starts don't always coincide with calendar months. I need to figure out a way to get the oldest date of the previous month, for example. Tried vlookup but could figure out how to do it for one year only, hence not as applicable with several years of data.
View 9 Replies View RelatedI have a VBA function that shows a user form. In the form, the user has to select a value from a combo box. Once they do that and click the submit button, I want to return to the next line in the function. So far I've been unable to accomplish this
View 1 Replies View RelatedI have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
We have multiple work orders per opportunity, and each work order has a date. I have a sheet of these work orders which shows the work order #, work order date, and opportunity date. What I want to do is add a column which reports the work order date if it is the earliest instance of a work order for the opportunity (said differently, the first work order for the opportunity). Is there a way to write a formula to report whether the date of the row is the earliest date for a given opportunity, all in the same table?
View 1 Replies View RelatedThere is a speadsheet at work with a column which has a range of dates (from 18/05/2003 - date) which information gets drawn from every Friday. The information needed from the column is pretty simple but lengthy to expalin. For example...
[url]
As you can the dates are in no order...and need to stay that way. The information needed every week is shown here...
[url]
I have got the formula for the number of enteries between each date but strugling with the earliest date within the dates. I can do it manually by auto filtering the column and looking for the date closest to the earliest date but this is long.
The dates change on a weekly basis...just to throw a spanner in the works.
Is it possible to have a cell "pop up" a calendar for users to pick a date from and have that date entered into the cell?
When using a Pivot Table I regularly filter on known data specific to me i.e. WBS codes.
Column ‘A’ contains the WBS Codes which can be as many a 1000, however, I only need to filter out the 10 or so I require, and currently I uncheck all the records and manually scroll through the list to check the ones I require.
In order to speed things up I recorded a macro which works fine, however, If I need to check any new codes I would have to record the macro again, as I tried to edit the Macro and all it does is to un check all the other codes I don't need.
Is it possible to create a Macro that picks up a range of data that is then used to filter on. (i.e. only the records I require)
I'm not sure how too set this up, here is a example of what I would like too do. This would make adding data too my list easy, I use Vlookup on my main form and it works great, had a lot of help on that from this site. I might be asking too much for this, if so tell me too go away.
View 14 Replies View RelatedI've created a userform that will pop up automatically when opening my workbook. My workbook will have many worksheets identified by the employee's last name, then first name (i.e. Doe, John) Etc. I ideally would like the name entry in my user form to locate the correct worksheet based on the sheet name and then all of the other data in the user form be put in the next available/appropriate row and column, etc. of that particular sheet. This user form would save me a ton of time keeping my training logs up to date, instead of having to locate each employee tab manually and then enter the data and then look for the next tab, etc.
At the end of the year I'll manually go to each worksheet and balance that year's training time and cost (as you'll see from the attached example), but I'm hoping that the user form entry will identify that "yearly balance row" as having data and would skip to the next row to begin the next year's training entry. The "Enter Data" Button would place all of the user form data (other than the name) into the appropriate row/column and I believe my refresh button will empty the user form fields, but I'm hoping it won't delete the data that was just previously entered into the worksheet. (See attachment)
see in atteched file User-form "frmEntry" work fine to update the data in Trader worksheet. but i need help to program.for the "frmExit" which i program. u can look in to the database "Trader Worksheet" .it enter the data in next available row.instead of up dating the corresponding existing stock ticker.to sell the stock.also when i enter the second sell of stock it change the row which is already their.not in new row.
View 4 Replies View RelatedThe userform takes the data to a worksheet, then i run a pivot table on the worksheet to provide an easy to view summary of entries....
I'd like the user to be able to amend a record if they see an error ... so from the userform how do i do that ? I've read a bit about refedit ( completely ) and a bit about Find...
I have managed to put together a userform to input the data from a safety audit card to populate a spreadsheet so that i can generate stats etc (every ticked check box inputed a tick onto the spread sheet into the correct colum for the data, on resetting the form it went to the next line as per the userform database example available here). This was working fine as it only had 5 check boxes and although my code was probably a bit rough, it did the job. The code I was using is:...
View 9 Replies View RelatedI have the following code in a userform, assigned to a command button.
Private Sub CommandButton1_Click()
Select Case TextBox2.Text
Case Is = ""
MsgBox "Please enter the Name of recipient."
Case Else
End Select
Select Case TextBox3.Text
Case Is = ""
MsgBox "Please enter the E-Mail Address of recipient."
Case Else
I modified this code as it was starting at the bottom of the worksheet & checking for the 1st vacant row from the top. I wanted it to start at the top & look for the first vacant row down. That way, if there was a entry that was deleted, it would find that row 1st & keep the list in order. This code worked fine for the last 2 days, but, this morning, nothing is being entered on sheet2.range A2 or lower.
I have a userform with two pop up calendars (calendar1 and calendar2). Calendar1 is the "start date" and must be a Monday. I have this portion working fine. If they select a date other than a Monday an alert message will pop up notifying the user a Monday must be selected. I need to limit the user to a date selection in calendar2 to be a minimum of three years out from Calendar1. I would like an alert message to pop up in Calendar2 should the user select a date inside of my three year minimum. Am I even in the ballpark with the following:
If Trim(Calendar2.Value) < (Calendar1.Value + "not sure here") Then
Calendar2.SetFocus
MsgBox "Select End Date 3 Years Out From Start date", vbExclamation
I just need to make a user form for entering data in one of the sheets ( Pending Confirmed Orders ), requested user form should be used to enter the orders information in columns ( each column in new entry ) and just the rows ( from 6 - 21 ) with noting that row no 16 is to link external pdf file as you will see.
File : [URL] ........
I have created a userform with a texbox and a "continue" button. In my macro I first ask the user to input name, date, etc then I have a line that says "frmDiscrepancies.Show". This code shows the userform but I am unable to type anything into the textbox. How do I activate the textbox so that I can type in it? Of course the next step is to be able to click on the command button "continue" and have it continue with the macro...
View 9 Replies View RelatedI am working on a spreadsheet to create a school 'tracking' system based on excel. What I need is that as soon as a box in column B is ticked, a date (TODAY() is entered in column A. That is not so difficult, and I have used the formula in cells in column A:
=IF(ISBLANK(Bx);"";TODAY()), where x is the specific row.
So, keep cell A clear untill something is written in cell B. This works fine.
But, for the purpose I need to keep the TODAY() date fixed after entry. And it need to be erased again if the tickbox in cell B is emptied again. It need then to re-enter a new date after cell B is re-used.
I'm having a problem with data validation. I set an entire column so that it could only be a date between the first date in the list and the current date. I tested a few cells to make sure that it was working the way I wanted and I noticed that it allows a random number like 3 or 5 to be input after row 50. This would create a date in the 1900s. Why is this happening and how can I stop it.
I have a requirements to do a simple monitoring data entry. Composed of 1 admin and 10 users. These 10 users are assign to a different lines basically every lines have assigned user.
These 10 user will do a data entry. once they are done on the data entry the Admin will update those entered by the users based on ticket number and the users can browse those updated records.
Every users per line have assign ticketnumber that start in "L1"&YY&MM "-"001" this compsed of lines + year+month and numbers.
For the users side. Right now i have already created a workbook with userform to perform data entry by user (samplefor line1 and line2 user).
It has also a viewing form to view by the users if its already updated by the admin. i put also an events if the admin work book is open by other user they cannot access the workbook.
For admin side. I created also a userform for updating the records entered by the users to update records admin will enter ticket number to textbox.
This is the reference to find and search those records that belong to a particular ticket number and lines which will be updated by the admin.
Right now, I am doing records consolidation for both user and admin records. I have a button for both admin and userlines to perform consolidation. Once the user entered the records admin will capture those records and copy to the workbook used by admin to perform update. Then once the admin perform update the user will capture those updated by admin and copy to the workbook under the user.
Basically they have separate workbook for their entry and database.
Right now I encounter some issues which I think this will affect the integrity if records. Sample like once i perform consolidation it create duplicates records.
I have a userform
1. On my userform I've got 9 txt fields, 18 opt boxes and 3 buttons (please see attached form)
My problem is: If I intput a principal name, spouse name and child/ dependants I seem to work just fine.
However, if I input just a principal name and child/dependant instead of just placing one child/adult dependant on the sheet it places 2.
As a matter of fact, if no spouse is selected and child/dependant is entered then the last dependant is always repeated.
I have used the following code:
Private Sub CmdAdd_Click()
LR = Cells(Rows.Count, "A").End(xlUp).Row + 1
Range("A" & LR) = txtPrin
Range("I" & LR) = txtTotal
Range("A" & LR + 1) = txtSpouse
If opt1.Value = True Then
[Code] ......
I have a list of account entries on sheet1 that go from 1/1/2014 to 2/05/2014. I want a userform that prompts for a cutoff date, where I will enter 1/31/2014, and it will then clear all entries AFTER the date that I enter into the userform.
I will be doing this on a monthly basis, and the number of rows will change each month.
Is this possible to do using VBA?
I am trying to find out whether you can restrict the rest of the userform from being available, unless a certain field is entered.
I have a tax invoice userform, I want to restrict the user from entering any other data unless they have selected a customer.
There are other fields such as Customer Address, Customer Number, Disc% and Terms that populate through vlookup code once the customer is selected, so still need that to work once the customer is selected. I just don't want them to be able to enter any other data on the userform without the customer being selected.
I wasn't sure whether I needed to enter code into every other textbox or combo box that if cboCustomer = "" then pop up an error message, but that would require a lot of code to be entered. I have 30 comboboxes and 53 Textboxes that I want to restrict to not being available unless a customer is selected from combobox.
I am trying to figure out how to build a drop-down menu with VBA that has 2 built in choices, 'call' or 'put', and based on the selection in the drop-down list (call or put), the value in the cell directly to its left will be 1 (if 'call' is selected) or 2 (if 'put' is selected).
I have tried doing this with the data validation tool, but the problem I have run into is that I do not want to store the items in the drop-down list (call or put) anywhere in the excel sheet.
I am working in cell T3 of 'workbook A'.
I want to lookup a value from cell C4 in 'workbook B' if the value in cell G3 of 'workbook A' equals "Yes". If the value of cell G3 in 'Workbook A' equals "No" I need the value to be 0.
I have a userform, UserForm1, which lives in a spreadsheet called 'Data Entry.xls' There is nothing else on the spreadsheet itself, it's just for the use of a userform.
I would like the user to populate textboxs in UserForm1 but have that update cells in a separate spreadsheet 'Training.xls' in the same directory.
I have this code at the moment to find the next empty row and to input data into it, which is working perfectly to enter data to sheet1 in Data Entry.xls:
[CODE]Private Sub CommandButton1_Click()
eRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = TextBox1.Text
Cells(eRow, 2) = TextBox2.Text
Cells(eRow, 3) = TextBox6.Text
End Sub[CODE]
How can i modify it so it would do the same thing, i.e find the next empty row and then populate with what the user types in the textbox but in Sheet1 of 'Training.xls'
Would 'Training.xls' need to be open?
I have a row stored in the variable Found_Row3 and I want to set the variable ACRow to all colomns from A to Z of that row. Below is what I have so far...not working
[Code] .....
I need to distribute a list of data into 10 even groups of data. Here is the scenario.
I have 10 salespeople on my team with a list of accounts that need to be evenly distributed based on two criteria
- Each sales person needs to have the same number of zipcodes , with the closest TOTAL # of accounts and TOTAL $ value as possible