I have a statement that runs to check for empty cells but i want it to only run when cells in column A contain data and this can change from time to time.
Eg sometimes column A will contain 10 items, sometimes more sometimes less, sometimes none.
Need a statement that will only run my statement when these cells contain data.
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedI am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I am trying to put an "If statement formula" within cells using VBA but it errors at the word "error".
Basically what I am trying to do is put similar to the following example into a range of cells.. for example:
=IF(LEN(Verbatim_LU!B2)>100,"ERROR","OK")
...with B2 being worked out by the for..with and the value (in this instance 100) being put in by VerbLen.
NB: Column A contains a reference number hence not having this actioned on it and counts start from 2
How I might be able to create an IF statement that would look at various cells and if empty, would go to the next indicated cell, ect, until it found data and then conduct the sum analysis indicated in my formula below.
The cells identified in my formula, which look for "", I want to skip to the next as stated above if empty.
=IF(J4="","",IF(N4="","",IF(S4="","",IF(AB4="","",IF(AF4="","",SUM(J4,N4,S4,AF4))))))
The problem with this formula is that if J4 is empty, it stops and does not continue on...
I use the If - Then statement in VBA to determine a condition which works perfectly fine for the particular cell I reference to, but i need it to apply to all the cells i.e. cells A1:A10?
Sub MACRO1()
If Range("A1") = "PAYE" Then
Range("B1").Formula = "=C2 * .128"
End If
If Range("A1") = "LTD" Then
Range("B1").Formula = "=(C2 - 100)* .128"
End If
End Sub
Sam
HI can't seem to get this last scenario laid into this if statement. I am having trouble with the second statement. I need the three cells to equal 100, but only when all three are filled. If only two as in this scenario I would like % Error in cell G2.
Sheet3 *DEFG250%50%*O.K.Spreadsheet FormulasCellFormulaG2=IF(SUM(D2:F2)=0,"",IF(AND(OR(ISBLANK(D2),ISBLANK(E2),ISBLANK(F2)),SUM(D2:F2))=1,"% Error",IF(OR(D2>E2,F2>E2,SUM(D2:F2)1),"% Error",IF(SUM(D2:F2)=1,"O.K.",IF(AND(E2>D2,E2> Excel Jeanie HTML 4
I have a worksheet that has 5 rows and 5 columns. The five rows are Highschool subjects. Math, English, French, Phys. Ed, History. The Five columns are Monday, Tuesday, Wednesday, Thursday, Friday. I want to device a worksheet that say for Monday it will have YES for math, no for english, yes for French, yes for phys. ed, no for history. Tuesday would be say no for math, yes for english, no for french, etc, etc. I then want to use an if statement to convert the yes & no entries to a numeric value. I.E I have this right now. =If(B6="YES",1,0)
This simply puts a 1 for a yes and 0 for a no into cell M6. What I want tho is each subject to add the amount of yes's for the week and put it into cell M6. So if math is taken 3 times a week it would put a 3 into cell m6. if History is taken 4 times a week it would put 4 into cell m7, etc, etc.
I have a ss that has item descriptions, quantities and pricing.
Item descriptions are identified by a letter (a, b, c, etc) and in cells C20:c32. These are selected by drop down box. Item quantities are in cells E20:E32.
I want to evaluate cells C20:C32 and determine what letter is chosen. If A is selected in any cell C20:c32 I want to count the quantities for A in cells E20:E32. I can't quite figure out how to do this.
I have a sheet with thousands of rows and 45 columns and I need to delete a range of cells (G:Y) if the cell in column V = the cell in column X, and I need to do this by row. I think an if/then statement would work.
View 4 Replies View RelatedI'm after a formula that will look at a number of cells(that are not in a range) with the word "C" and if they all = "C" then I want the cell to come back with the result "yes" otherwise "no".
View 12 Replies View Relatedtask of inserting a block of cells into a worksheet.
I have saved 4 different blocks of cells and depending on an option chosen from a drop down menu i want to select one of more of these sets of data and paste them into a worksheet.
I want to conditional format cells with an if statement (something to that nature). I attached an excel file to aid in my question. Basically I want it to be color coded to alert users Red if no action is required because info is left out Yellow if info is available so take action Green if all is complete and nothing needs to be done.
If G2 does NOT have data then cell H2 has red fill
If G2 does have data then cell H2 has yellow fill
And finally if I2 is filled out cells A2:I2 are green filled
I have two cells with the following equations:
H3=IFERROR(VLOOKUP(A3&TEXT($A$1,"m/d/yyyy"),'CLABSI_Raw'!$A$1:$M$300,13,FALSE)," ")
I3=IFERROR(VLOOKUP(A3&TEXT($A$1,"m/d/yyyy"),'CLABSI_Raw'!$A$1:$M$300,10,FALSE)," ")
In an adjacent cell, I am trying to use an if statement
J3=if(and(H3<1,I3<1),"yes","no")
I am not getting a return in cell J3.
Would like to write an IF statement where it reads if any cells in a column are highlighted and gives the sum of those highlighted while ignoring the ones unhighlighted.
Is there any way to do this or an alternate method that would possibly work?
if it's possible to create a statement from cells in a workbook perhaps by using the hyperlink option or if there is any other alternative way.
In brief, the statement should recognise what has been inserted into each cell in the row and then generate a statement.
I hope this is clear. See attached a copy of the excel sheet from which I would like to create the statement.
I've got four columns of data. The first column contains pricing for a bunch of products from our company. The other three columns contain pricing for three other competitors. So for example:
Product | Our Price | Comp1 Price | Comp2 Price | Comp3 Price
Gloves | $4.59 | $5.00 |$6.00 | $3.56
Hats | $5.00 | | | $4.59
In column G right after Comp3 Price I have an IF statement that says if Comp1 Price is less than Comp2 Price, Comp3 Price, and Our Price, to print "Comp3" in that cell. If it is not less than the comparable data, then check Comp2 Price then Comp3 price in the same fashion. If Comp1, Comp2, or Comp3 is not less than Our Price then print "My Company Name." This will allow me to see who has the lowest price for that product and also tell me if that lowest price is lower than our price.
My problem is that I can't get it to work out so Excel ignores blank cells. So for example, Comp3 has the lowest price amongst our competitors for hats and is also lower than ours. But when I check for Comp3 price being lower than Comp1 and Comp2, it comes back as negative because Excel sees those cells as zeroes even though they're blank. My formula is:
=IF(AND(C2<D2,C2<E2,C2<B2),"COMP1",IF(AND(D2<E2,D2<C2,D2<B2),"COMP2",IF(AND(E2<C2,E2<D2,E2<B2),"COMP 3","MYCOMPANY")))
This would do exactly what I need Excel to do if it would ignore the blank cells. The problem is that Comp3 has pricing for hats because they offer hats, but comp1 and Comp2 don't offer hats at all, so naturally Comp3 has the lowest price; however, according to Excel Comp1 and Comp2 have the lowest price because the cells are blank and counted as zeroes.
So, does anyone know how to work this out so Comp3 will be counted as the lowest price for hats, ignoring the blank cells of Comp1 and Comp2?
I have been given a spreadsheet with the sales data for each of our salesmen. Each job has its state listed and what I need to do is break down the information by region. The catch is that the regions are not given - just the states. So I need to assign the states to their corresponding regions. To do this, I tried writing an "IF" statement like this:
=IF((B2="AL"),"SOUTHEAST",IF((B2="CA"),"WEST",IF((B2="NJ"),"NORTHEAST",IF((B2="TX"),"SOUTH CENTRAL", ... and so on.
So I was doing this for all 50 states. The problem is that the statement got too long. So how do I write this? There has to be a shorter/easier way.
I have a sheet with several thousasnd lines that has empty cells between the account number and account name. I need to fill those cells with the account number and account name so that it can be used in a pivot.
View 2 Replies View RelatedI need a formula that will tell me if EITHER two cells = a text word. I've tried a few things and can't seem to get it to work!!!!
See in the example of my spreadsheet below: If A2 = FALSE or B2 = FALSE then D2 should display "Allowed" if either are TRUE D2 should display "Not Allowed"
Is this possible!?!?! I've tried way to many different formulas and am close to giving up..
A
B
C
D
1
Not Slow
50%
FY
Change
[Code] ........
I need to see if it is possible to set up an IF statement that can pull information from cells based on the results already available in those cells.
ABCDEFGHIJKLM1Non FeaturedGoodGoodIdentical IMEIsGoodNeeds RLM NumGoodGoodGoodChk DOA BoxGood32Non FeaturedNo ExchangeGoodGoodGoodNeeds RLM NumGoodGoodGoodChk DOA BoxGood23
What I need is a formula in cell M1 that will check each cell B1 thru K1 for the data "Good". If it does not equal "Good", then I need the checks true/false value(s) to show the reason shown in the other cells.
In other words, for row 1, i need a formula where the outcome would be "Identical IMEIs" because D1 is the first box in the set that does not equal "Good". Then if D1 was corrected to "Good", the outcome would then be "Needs RLM Num".
I tried to do it in sections such as {=IF(B7"Good",B7, then the next check )} but the number of statements exceeds the number of IF statements that can be nested. And I really need the formula to fit in one cell.
I have a range that contains a mixture of hard coded data and data pulled from a database sheet. I want to average only the hard coded data not the ones in the cells containing formula. I need this to be dynamic instead of just selecting the cells as formula might be added later on.
View 1 Replies View Relatedthe AND part of the statement tells the cell to see if 4 cells are all <-10 then do its thing that part works what i need now is if that has happened then do not do the next 3 cells
View 2 Replies View RelatedI am trying to build an if statement to test variables that are in time format and then perform a calculation.
I was able to get an example working if I convert the start times to integers rather than time values. However, the data won't be provided to me as integers.
So, I need a nested if statement (using "and") that will test for two situations using cells in time format or I need to write a macro to convert the time data to integer format. I've been working on the former most of the day and have hit a brick wall.
In cell M32 there will either be an O or the cell will be blank. In cell T51 I had placed an IF statment like this:
=IF(M32="O","","X")
Now that works ok but there is a glitch on my part. If T51 is blank because of M32 containing an "O" then the user will also enter a number into T51. Because I was using an IF formula in the cell it gets overwritten because of the user needing to enter data in the cell because of M32 containing a O. How do I write a macro so that a similar formula is used but still able to enter data manually without overwritting the formula?
I was trying to use an if statement to produce results based on 2 cells. The number in the 1st cell can be the number 1 to 5, but each number has critera with it. Say the cell is A1 and i enter the number 1. Then i want to check the value of Cell A5, if this is less than 40 then the cell A10 should read 250 and if A5 was over 40 then it should read 285. struggled to get a formula properly to work.
Here are the values for each number: A1 = 1 with cell A5
I want a message to show up if I have any of 6 selected cells empty? It basically serves as a reminder to fill in all required cells in a sheet that may be located in different cells. How can I write a formula in one cell that will look at all source cells and tel me that some are empty?
NameAgeLocation
Joe******
HeightWeightTime
******3 PM
Formula Here to verify all filled in.
I've got a work book (2010 btw) with several tabs.
On tab 5 is an inventory list with "Stock Number and Nomenclature" merged in row A7-Q7 and down to row A23-Q23.
Beside each Item there are “Required Quantities (EA)" in Colum U7-U23. After an inventory is executed, The values are placed in Colum V7-V23 (INV).
Stock Number Nomenclature EA Inv
34419-43450 Mission Modu 1 “X”
After inventorying.... I need a formula that "compares the required quantities (EA) to the actual inventoried values (X)".
IF the actual inventoried quantities are equal to or greater than "Required Quantities" - Display Nothing in tab 6
IF the actual inventoried quantities are LESS than the "Required Quantities" - Display “Stock Number and Nomenclature" in tab 6 for a shortage list, ignoring the "blank cells".
I need to sum cells that contain this formula: =if($c$5=0,"",c5*b5). I am getting a wrong data type value error.
View 7 Replies View RelatedI have a list of data for each year dating back 10 years and some of lists had entries that weren't available so the cell showed up #N/A. I searched and replaced them with 0 but when I graph the data it skews my graph. I was wondering if it was possible to take a logic (IF) statement that says if the cell = 0 then take the average of the next and previous data points so the graph looks smooth. i.e. =IF(G444=0,(G443+G445)/2,G444) This gives me the correct number i want, but i want to apply it to all my lists like a format if possible.
View 1 Replies View Related