I have a range that contains a mixture of hard coded data and data pulled from a database sheet. I want to average only the hard coded data not the ones in the cells containing formula. I need this to be dynamic instead of just selecting the cells as formula might be added later on.
View 1 RepliesI need to get together a countif formula that only counts if BOTH specified criteria are true... This is what I thought would work:
Code:
=COUNTIF(W1:W28, AND(>A18,
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedI basically want for it to be able to calculate all the games a each team has won in the example below.
View 13 Replies View RelatedI am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
in sheet 2 cell g16 i need it to count how many times "horse racing" appears in sheet 1 column m and also for it to count how many "y" are in column g of sheet 1 and return something like
4 from 4
this example is taken from the attached sheet
basically it needs to count the yesses in column g that correspond to the horse racing in column n
so there could be 7 instances of horse racing ( 4 in this example ) and count the y's in column g which could be 2 ( 4 in this example ).
I have been looking for a way to count the number of cells in a column that do not contain the word "No." I used the countif formula to count the cells that do contain "No" but I need a formula to count cells that contain anything but the word no.
View 11 Replies View RelatedI have a list of assessment scores for students with a matching grade in text form. I want to show the percentage of students that receive "Adv" and "Pro" grades out of the total number of students (cells with data). But I have extra cells in case students are added during the year. I need to have the formula ignore any empty cells and count all of the "Adv" + "Pro" grades divided by number of students with data. I would like to do this by including the extra cells in the formula so I don't need to amend the formula should students be added. This is the formula so far. Maybe there is a totally better way to write this formula.
=SUM(COUNTIF(C7:C60,"*"&{"Pro","Adv"}&"*"))/COUNTA(C7:C60)
I have cells C22:C27 with a number that could change each week. How can I get a total of the number of cells that = 0,1,3,4,5,6,7,8,9,10,11,12?
View 3 Replies View RelatedI have data over the last 170 days. Each entry has a time stamp. I would like to count how many entries there are between 7:45 am and 2:45pm. A total count across all 170 days is needed, but it would be great if I could break that down by calendar day (i do have that as a column).
Here is a sample of the data:Friday11/15/1307:08AM
Friday11/15/1307:08AM
Friday11/15/1307:16AM
Friday11/15/1307:16AM
Friday11/15/1307:46AM
Friday11/15/1307:46AM
And the sheet has dates starting in June and ending in mid December.
I'm hoping there's a more efficient way to do this in that I'd like to replace - for example - over 100 formulas with just 1.
Take this simple example range in a column of numbers: 100 down to 0 and for each cell there's a count of how many times that number is greater than those that follow. The 1st is 100 times, the 2nd 99 times and so on... finally I need a sum of these resulting counts.
My current method would require over 100 formulas in 100 extra cells to do this
I have attached a copy of my spreadsheet .My formula is in column BA and I am trying to figure out which students have 5 A* - C. We are only allowed to add 2 vocational subjects to this formula so basically 3 (or More) GCSEs + 2 BTEC/OCR Nationals. Now my formula works pretty well except if the candidate has 4 GCSEs and 0 or 1 BTEC it is still calculating as though the candidate has achieved 5 A* - C.
I have highlighted GCSE Subj in pink and Vocational Subj in Puple.
I have a drop down list in a column called Report Type (example below).
Report Type - Drop-Down Menu in Column F
Business/Operational/Work Plan
Budget Report
Performance Report
Program Quarterly Report
Program Mid-Year Report
Program Annual/Year-End/Final Report
Service Quarterly Report
Service Mid-Year Report
Service Annual/Year-End/Final Report
Financial Quarterly Report
Financial Mid-Year Report
Financial Annual/Year-End Report
Auditied Financial Statements
In-Year Reallocation
Annual Reconciliation Report
SRI Report
Other Report
I need to count all the cells that have: Budget Report, Financial Quarterly Report, Financial Mid-Year Report, Financial Annual/Year-End Report, Audited Financial Statements, In-year Reallocation, and Annual Reconciliation Report
Is this possible with a countif formula?
I am trying to put an "If statement formula" within cells using VBA but it errors at the word "error".
Basically what I am trying to do is put similar to the following example into a range of cells.. for example:
=IF(LEN(Verbatim_LU!B2)>100,"ERROR","OK")
...with B2 being worked out by the for..with and the value (in this instance 100) being put in by VerbLen.
NB: Column A contains a reference number hence not having this actioned on it and counts start from 2
I have an array formula which reads:
{=SUM(IF(Female2!$A$2:$A$5000=$A403,IF(Female2!$C$2:$C$5000=C$402,IF(Female2!$1:$1=C$401,1,0))))}
However this formula only counts the number of cells (returns 96 for 96 cells) rather than adding the numbers in those cells to come to a total of 34.
i know its out there, i just cant find it. I have a list of names in a specific pattern of cells on a spreadsheet. I would like excel to give me a number of how many names i have in this spreadsheet. I know COUNT does numbers, but is there a formula that counts names?
View 2 Replies View RelatedI have a list of 100 values in Column A of the attached spreadsheet Sample.xls. I need to count the number of values between a certain percentage including both positive and negative values. Example: I need to count all values that are between 0 and +5% and 0 to -5%.
View 2 Replies View RelatedCurrently, I am using countifs to count data within a specific range if it meets a criteria. Now I want to add to the formula. I need to count the cells within the specific range meeting the existing criteria I already have but only if one cell is greater than another cell.
This is what I currently have: =COUNTIFS(Report!$F$4:$F$1048576,">=8/1/2013",Report!$F$4:$F$1048576,"=8/1/2013",Report!$F$4:$F$1048576,"
I am working on a sheet that has over 150 tabs of information. It is a simple audit that allows for Yes, No or N/A to be selected for each audit category. I have an Outcome Summary tab that is pulling totals for all the audit information on each tab. I did a CountA statement to count any cells (from all worksheets) that had anything selected, so I have my count for the amount of files audited, but for the life of me I cannot come up with a formula that counts the ones that passed or failed the audit. Needs a formula that counts for Yes as 1, No as 0, N/A as 1 (these don't count against us) and doesn't return an error for a tab that wasn't selected.
View 3 Replies View Related I have the following SUMPROCUCT in place and it works fine for current purpose:
=SUMPRODUCT(VLOOKUP($E$9,Rota!$C$4:$FU$369,{5,30,53,78,103,137},FALSE))
columns 5, 30, 53, 78, 103, 137 all contain text. However I need to amend some of these to text but I still need the SUMPRODUCT to add up.
Is there a way to amend the above formula so its counts both text and numbers in 5,30,53,78,103,137 ?
creating a multiple if statement. I have 3 columns in Sheet 1 called "Raw Data". Column A is dates, Column B is Clients and Column C is Products. I want to count the number of products sold to a specific client on a specific date. In Column A, the are multiple dates repeated as there are different sales reps so i have the dates repeated several time.
the current formula i am using is:
=COUNTIFS('Raw Data'!$A:$A="2013/01/01",'Raw Data'!$B:$B,="MotorCity",'Raw Data'!$C:$C,="Cars")
the problem is that i keep getting 0 as a value. If i remove the Date as a variable, the formula works. I just cant seem to count multiple criterias if the date is one of them.
In s74 I have the formula
=COUNTIFS(C:C,"Holiday Inn Express Limerick",I:I,1)
And it gives me a count of 21. Is there a way where I can use conditional format to highlight those 21 instances?
How do I write a bar chart which reads the format of a cell instead of the content? ie I want to count how many cells in each column are amber. Amber cells have already been decided by conditional formatting.
See demo attached : bar chart demo.xlsx
I have set my 'lastrow' to the last value in column A. The problem is, this code gets run whenever an autofilter is made. As a result, the 'lastrow' records itself as the last row of visible data. In reality, I need it to track the actual last row of total data.
lastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
The formula below was posted recently as a way to extract a numeric substring from somewhere in larger string. When I first saw this formula, how it "came up with the goods" and so I spent some time looking at parts of it to see what they did.
Although I've made some progress, I still don't fully understand it. Heres the formula, and below Ive detailed how far I've got:
=Iferror(lookup(9.99e+307,--mid(a1,min(find({1,2,3,4,5,6,7,8,9,0},a1&1234567890)),row(indirect("1:"&len(a1))))),0)
I hope my findings below are correct:
1. The formula is returning the first substring of contiguous numeric characters from the full string in Cell A1
2. 9.99e + 307 ensures that the search value won't be exceeded by the returned value.
3. The Mid function uses Min(Find( to get the character position of the first numeric in A1 (so MID then has its first 2 parameters). So far so good.
4. Now... I cant work out where MID parameter 3 (the substring length) comes from. I suspect its the row function, but can't see how as this isn't an array formula, and without CTRL+Shift+ Enter, I could only get Row to return 1 in my experiments (giving me only the first substring digit).
How does the formula return the correct number of numeric characters, (apparently) without counting them?
I have a countif statement based on certain criteria in a table which is reading off of a drop down list on a separate sheet.
Apple (a1) =COUNTIF(Table2[Fruits],+'Drop Downs'!A1) ...and the results are 3
Pear (a2) = =COUNTIF(Table2[Fruits],+'Drop Downs'!A2) ..and the results 0
Banana (a3) = =COUNTIF(Table2[Fruits],+'Drop Downs'!A3) ...and the results are 1
I have also set up a bar graph (this may change to a pie chart at some point) which is feeding from this. My question is, if I do not want to any results with 0 value to show up on my chart (both on the X&Y axis), how do i amend the formula to do this? I read in a couple of places about the NA() function or about just hiding the rows, but if this chart is updated "live"on a weekly or monthly basis, I would like to chart to move with the data simultaneously...so the numbers will change, sometimes they will be 0, others they may not.
I am using the formula below to count the occurences of relevant text strings (names) in a cell that can contain many separate strings. It works great. "References!$F$2:$F$34" contains my list of names and the formula returns how many occurences there are in each cell.
What i'd like to do know is work in a date criteria. Each name has an associated relevant date attached to it as does each cell that I am looking for these names in.
So...in english what Id like to do is alter my formula so that when it finds a text string that exists in "References!$F$2:$F$34", it then compares the associated date in "References!$G$2:$G$34" with the date associated with N3 which happens to be O3.
SUMPRODUCT(COUNTIF(N3,"*"&References!$F$2:$F$34&"*"))
For work I keep track of errors in files my co-workers make. So in one individual cell it may look like this :
OP15698
OP25687
or
OP45986
OP74563
I simply need to count how many of those file numbers there are in one cell.
Is this possible? I also use Excel 2007.
Is it possible to insert a formula or have a calculation performed for the range component when using the countif statement.
I am trying to take the entries in the rows in column B and divide its corresponding row in column A and then count how many meet a certain criteria.
I have been using this function to count the number of unique text values in a data set:
=SUM(IF(FREQUENCY(MATCH(B2:B10,B2:B10,0),MATCH(B2:B10,B2:B10,0))>0,1))
It works great if I want to count number of unique text values overall. However, I want to count the occurrences of unique text values if they meet specific criteria. (Like a countifs function would if it could count unique text).