I have a field called “Age”. What I want to do is; If I type in the person’s age say “26” then I want another cell to display an age range (i need to entered the age ranges i want eg “16-20, 21-29, 30-39” etc. So if I type in 26 in the first filed I want to second cell to display “20-29”.
View 3 RepliesWant to be able to select a month (Jan - Dec) set in a range A1:L1. When the selection is made, I want the selected cell to be displayed in a separate location e.g. cell C4, but if the selection is outside the range A1:L1 then C4 to remain blank.
View 5 Replies View RelatedIn cell D1 of sheet 2, I want the cell reference to be displayed of the next available cell in column A of sheet1
for example if cells A1:A238 in sheet1 are populated the cell D1 of sheet2 will display A239
How can I get the last cell with data, show in other cell? For example last cell populated info in total cell.
Date Cases Within 30 Days
01-Sep-0622.83
02-Sep-0622.78
03-Sep-06
04-Sep-0622.86
05-Sep-0622.82
06-Sep-06
07-Sep-06
Total22.82
How could I create a menu that displays cells from another sheet when the appropriate menu value is selected?
For example, the menu (on sheet 3) would have:
Week 1
Week 2
Week 3
If I select Week 1, I want to display cells B4:B10 from sheet 2 underneath the menu. If I select Week 2, I want it to display cells B19:B25 from sheet 2 under the menu.
I am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.
View 2 Replies View RelatedI'm trying to have text in a specific column output a letter, only if every cell in a range of 4 contains the letter Y (yes). Using IF/SUMIF formulae I have managed to get he final cell to output the text, but it does it if ay one of the range of four cells contains the data, not all of them, which Is what is desired.
View 9 Replies View Relatedif i have data from A1 to A10 and they are changing every 10 sec.
i want to display them one by one in message box every 10 sec or 1 min.
I cant seem to work around this in excel.
For example.
I got work sheet with all data, and i need something like, if cell A1 = Left, and cell A2 = right, display only a range of data, say all data in row P to R and row U to W only accordingly to the criteria i set in a new worksheet in same workbook. And i need the display data to update automatically everytime i change the criteria.
Can I have a formula in A1 cell to display the No. of cells in selection (in a range) any where in the sheet. Just the No. in A1 cell is sufficient
View 4 Replies View RelatedI have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
I have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
how can i check the range value if i have the merge cells in the range? i want display it in the msgbox.
View 10 Replies View RelatedI'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedI have a column of numbers ranging from -500 up to 50,000... How do I get it to only display numbers between 0 and 1000?
(I already have a formula attached to this column)
I want to use a msgbox to display the dim range of
r = "G" & endg & ":J" & endg
Should be something like G29:J29
How can I do this?
it's so I can investigate what is going wrong with my pie chart code
Code:
Sub Add_PVVrGChart()
Dim co As ChartObject, endg%, i%, r$, sname$, suffix, r$, s$
'~~~ Suffix allows the code to be manipulated more easily with changing the sheet name but keeping the Suffix the same
suffix = Array("A", "B", "C", "D", "E", "F", "G", "H")
For i = LBound(suffix) To UBound(suffix)
[Code]...
I'm trying to figure out a way of showing a price range on lots of different products. My spreadsheet is set out as follows(sorted by price ascending):
column A Column B
Product1 $1.99
Product1 $2.43
Product1 $3.01
Product2 $21.01
Product2 $23.98
I want to be able to summarise the product 1 price range as $1.99-$3.01 and product 2 as £21.01-$23.98. Is it possible somehow to concatenate the price from the first and last occurence of each product in column A?
I have about 20 named ranges, and I have a formula that spits out the name of the range I would like to be displayed. So, for instance, in cell A1, it says "Red1" (the words are created by a formula though). I want the data to change to the new data if A1 changes to say "Red2". The problem is that when I refer to the contents of cell A1, it will not use the contents as the named range. This was a little difficult to word so if you don't understand what I am saying just ask.
View 3 Replies View RelatedI am writing a macro in which the user selects several ranges (entire columns) for the macro to manipulate. I display a userform to the user that contains 16 refedit objects (1 for each range that they picked). Unfortunately, the value that appears in the refedit boxes is not very user-readable. It looks like this:
'[WorkBookName.XLS]Sheet1'!$B$5
I can assume that all of the ranges will reside in the same workbook, so I have been cutting the workbook name portion off as a string and displaying it in 1 place only. I can leave the value of the refedit as: Sheet1'!$B:$B, but even that is not very friendly. Of course if I do change the value of the refedit controls then I will need to "fix" them before attempting to access the range.
Does anyone have a suggestion as to how to display the sheet and column of the range to the user?
I am using the following code to display a range of cells from a single column (A1:A10) in a message box, with each cell value on a seperate line.
View 7 Replies View RelatedThere will be anywhere from 1 to 5 values in each of these columns, but not
successively. There will be several blank cells inbetween these nonblank
cells, which I need stacked neatly into the first five rows at the top of the
worksheet.
Example:
(A10) - Apples
(A17) - Oranges
(A23) - Peaches
(A38) - Some other fruit of your choice...
(B14) - Toyota
(B21) - Honda
(B44) - Mercury...........
Excel Formula, that will display the top 5 values withinin a range in another area.
Example: I have a row of number, 16, 72, 87, 12, 45, 23, 12, 43 etc.
I want a different row to display the top 5 values from the this row/range. I do not want to simply conditional format the first row.
I've got a spreadsheet where i need the user not be able to save the workbook if there is a blank row in a range of task which run from A4-last cell with data entered.
I would like it to say that "the row will be deleted, please amend"
After the check has been completed or varified it saves
i want to insert a range of cells from a worksheet onto a userform. how can this be accomplished? i use excel 2007, so theres no spreadsheet control. active x controls i dont know anything about and i heart its unsafe.
View 9 Replies View Relatedit is possible to populate a textbox (Userform_Initialize) with a predetermined range from a worksheet ("range" meaning " multiple cells"). I know you can set the ControlSource to populate the textbox using ONE CELL, but I don't know a way to do this with a range of data.
I've tried using the Value and Text properties, but no luck. I'm hoping to have the Userform Textbox populate automatically with a set of data when the Userform is opened. The data will always be 2 columns wide, but could be anywhere from 1 to 50 rows long. I've considered naming this dynamic range and then populate the textbox (somehow) with the named range. Can't figure it out and beginning to wonder if it is possible using VBA.
Can I display the contents of a range of cells in a message box?
View 4 Replies View RelatedI am using the built in moving average function to calculate the moving average of a set of numbers. There are a few things that i would like to do.
First i would like to have the last result displayed in a single cell. Then next to that cell i would like to have a cell that would specify the period of the moving average. I would like to be able to change the period in that cell and have that change it in the actual function. And finally i would like to have the moving average in a chart that would also change its period once that is changed in the respective cell. I realize that this might need some VB coding which i am currently learning.
I have been trying to get a certain selection of cells to display inputs as capitalized no matter if entered in lower case. I looked through this forum and found some, I did try some of the suggestions, and I am having no luck. I am wondering what I am doing wrong?
View 12 Replies View Related