IF Formulas With Multiple Ranges
May 31, 2009I am trying to combine three IF formulas that depend on ranges that vary. I think the attached sheet does a much better job of explaining what I am looking for than I can do.
View 3 Replies
ADVERTISEMENT
2 Input Vertical Ranges Need Formulas To Output 2 Vertical Summary Ranges
Mar 7, 2013I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
Formulas Using Ranges Within Cell?
May 2, 2014I'm working on a project whereby ranges of values are "scored".
The current layout shows ranges of within cells, and a hidden row with single values for the formulas to utilize. This means that whenever ranges are adjusted, the singles values also have to be changed.
I've attached a portion of the spreadsheet as an example.
Is there a relatively simple way to have the formula recognize the ranges as values and "score" accordingly?
If there is, can this be used for both ascending and descending ranges?
I should add that the ranges are not always percentages.
Using Date Ranges In Formulas ...
Feb 18, 2009I am having trouble entering a formula that measures how many times "Open" occurs in one column IF another column's entry is between 2 dates or within one particular month time frame. I've tried a bunch of formulas but can't seem to get anything to work!
View 9 Replies View RelatedVBA - Paste Formulas Into Cell Ranges
Aug 12, 2014I would like to add another step that pastes the formulas copied from the active sheet, to specific ranges of cells.
I would like the PasteSpecial XlFormats to apply to all cells on the active sheet, where as the PasteSpecial xlValues would only apply to all cells not in the ranges that the Formulas are getting pasted into.
Also for formatting purposes I have a few cells that are merged in the active spreadsheet, that unmerge when I run the macro. Ideally I would like any previously merged cells to stay merged once the macro is run.
Below is the VB I have...
VB:
Sub SaveSheet()
ActiveSheet.Copy
With ActiveSheet.UsedRange
.Copy
.PasteSpecial xlValues
.PasteSpecial xlFormats
[Code]...
Compare Named Ranges With Formulas
Dec 23, 2008i have an excel sheet with two columns, and depending on the status of the equipment, i need to compare the two columns and if the data is the same, fine, otherwise i need to display a msg box with an error. the columns have formulas in them, and i assigned a name to the cells i want to check, i keep getting errors with the following code, when the colums are the same, it is still displaying the msg box with the error. what am i doing wrong?
For Each Row In Range("Dev_Found") 'Loop through each row in Column C
If Row.Value ActiveWorkbook.Names.Item("Dev_Left").Value Then
blah = MsgBox("Your % Dev for after does not match % Dev before, please correct on form!", vbOKOnly, "Error")
Exit For
End If
Next Row
Inserting Named Ranges Into Formulas
Apr 18, 2006I am wanting to build a macro to calculate the average of a range of cells. I have about 2000 lines of data, and I want to average the first 12 cells (then paste the answer somewhere else), then average the next 12 cells, and so on. Using a loop to do this is simple enough. My problem is that I can't insert variables into the average formula as the cells to be averaged
Sub AutoAverage()
For x = 0 To 20
For y = 0 To 171
FirstRowRef = Workbooks("NP FT01-03 010206.xls"). Sheets("NP - FT01") _
.Range("a5").Offset(12 * y, 12 * x)
LastRowRef = Workbooks("NP FT01-03 010206.xls").Sheets("NP - FT01") _
.Range("a16").Offset(12 * y, 12 * x)
Workbooks("Mega Spectrums.xls").Sheets("NP - FT01").Range("a5").Offset(y, x).Select
ActiveCell.FormulaR1C1 = "=AVERAGE(FirstRowRef:LastRowRef)"
Next y
Next x
End Sub
Named Ranges - Indendify Ones Not Used In Formulas
Sep 29, 2006I have been handed a workbook which has been used and amended by a number of people over about 5 years. The workbook has lots of named ranges, many of which are obviously now defunct. Others may be defunct but I'm not sure. I would like to delete all of the defunct ones.
Does anyone know a way in which I can identify the cells in which a named range is currently being used?
Add Array Formulas To Mutiple Ranges
Oct 3, 2007I would like to set up VBA codes to generate a variable number of transition matrices. I would like to know how I can define dynamic ranges instead of coding each and every range. In the codes below, I have to define each range one by one instead of using a loop.
Sub TransitionMatrix()
Dim P1 As Range
Set P1 = Cells(2, 2).Resize(3, 3)
Dim P2 As Range
Set P2 = P1.Offset(5, 0).Resize(3, 3)
P2.Cells(0, 1) = "P2"
For i = 1 To 3
For j = 1 To 3
P2.FormulaArray = "=MMULT(" & P1.Address & "," & P1.Address & ")"
P2.BorderAround Weight:=xlMedium
Next j
Next i
Dim P3 As Range
Set P3 = P2.Offset(5, 0).Resize(3, 3)........................
Absolute/Relative Ranges In Formulas
Oct 22, 2007I have a Formula = SUMIF('Master List'!B3:B190,AE197,'Master List'!AG3:AG190)
When I copy this formula the next line is as Follows =SUMIF('Master List'!B4:B191,AE197,'Master List'!AG4:AG191) Is there something I can do to in order to make so that when I copy the formula is would read =SUMIF('Master List'!B3:B190,AE198,'Master List'!AG3:AG190). Elliott Auto Merged Post;Nevermind I used the formula = SUMIF('Master List'!$B$3:$B$190,AE197,'Master List'!$AG$3:$AG$190)
Variable Cell Ranges In Formulas
Feb 23, 2008I need to run a formula each month which calculates the ‘product’ for a range of cells in a column, where the cell range will change each month. The starting cell for the range is static, but the range end will always change - additionally, the last valid cell will always be followed by a null value cell. The attached example shows the basic format of my data – a range of values, by row, which will always end with a null value cell. The formula I’m using (to match my example) is: =(PRODUCT(A10:A13) –-> and I want to display the result in cell C10.
While I’ve been able to identify the ‘ending good row’ several ways, I haven’t been able to figure out what to do with this information – I seem be be lost in the translation of OFFSET values to CELL REFERENCE values. Has anyone encountered this specific scenario and found a solution?
Changing Named Ranges In Formulas With Dropdown?
Jan 25, 2012I have a workbook with several sheets and named ranges like ES_Date, ES_Range, ES_Volume or MC_Date, MC_Range, MC_Volume. The 1st two letters are the name of the sheet where the named ranges are located (one is dates, another volume, etc.).
What I'm trying to do is calculate averages, extract maximum and minimum values from the the named ranges using a start and end date that are entered in cells "H6" and "I6". The formula I am using right now is:
{=AVERAGE(IF((ES_Date>=H6)*(ES_Date
Locate Dependents & Precedence Of Formulas In Named Ranges
Nov 17, 2007I need to select in a sheet the cells which have name reference to see if the whole sheet is dependent , i have tried to trace the dependents and precedents but that didnt work,
View 5 Replies View RelatedCopy Multiple Ranges From Multiple Sheets And Paste In Order Via VBA
Apr 21, 2013I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
Print Multiple Ranges From Multiple Sheets Userform
Jun 16, 2007I inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click()
Sheet7.Activate
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.RightFooter = " Construction Assumptions"
.PrintArea = "CONSTRUCTION" 'the named range to print
.Zoom = False
.FitToPagesTall = 1
.FitToPagesWide = 1 'this changes depending upon the page selected
End With
ActiveSheet.PrintOut
End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate
'Sheet3.ResetAllPageBreaks 'disabled due to errors
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.PrintArea = "DEVBGTALL" 'the named range to print
.FitToPagesWide = 4 'this changes depending upon the
.FitToPagesTall = 1
End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
Track Changes On Multiple Selected Ranges On Multiple Sheets
Jul 6, 2007I need to be able to track changes on selected ranges on multiple sheets, but Excel does not appear to be able to do this. It only appears to allow me to select multiple ranges on the same sheet.
is there a way to track changes on multiple selected ranges on multiple sheets
Multiple Parameter Lookup For Multiple Table Ranges
Jun 15, 2008In the attached file i have multiple tables for different types of conservatory roofs (16 of them in total). The ranges at the top and side relate to milimeter measurements and the data in the middle relate to the price for that sized conservatory roof. The table works where the two ranges intercept each other. I have a formula to do this for one of the tables only. What i would like is a way of choosing which type of roof to use (i.e. which table to use) and then to be able to input the measurements and the price to be displayed. All of this needs to be done in one query so its as user friendly as possible. i've had is to use a pivot table, i feel it is not possible to use a pivot table to do this sort if thing after research into them, although i am un-familiar in the making of them
View 4 Replies View RelatedVLOOKUP For Multiple Ranges In Multiple Columns
Feb 21, 2013Im trying to make a vlookup so I can say find a record where column A is >4, B is =2, C is 1.
Example - The lookup would find these 2 ranges.
7
2
3
2
6
4
[code]....
How To Set Multiple Ranges
Feb 1, 2014I have set following ranges:
[Code] ....
I use above rngData1 as follows:
[Code] ....
How can I use all above ranges in For Each statement?
For example For Each rngRow In .Range(rngData1+rngData2+rngData3+rngData4).Rows
How To Add Multiple Formulas
Dec 13, 2008I'm trying to add the sum of two seperate columns on two seperate criteria.
The formulas needs to add all cells in range B9:B149 that contain the word "OPEN" and that also contain thw word "MF" in the cell range of C9:C149 to give me a numerical total.
I tried using the IF, COUNTIF, SUMPRODUCT but the mutliple criteria is beyond me.
IF Function With Multiple Ranges?
May 18, 2014I am trying to create an IF function and how to create it for multiple ranges. The for the following criteria is what I am trying to work with: If a checking balance is $500 dollars or below return "low", If it is between 500 and 2000 return "Medium", and IF greater than 2000 return "high"
View 2 Replies View RelatedCount In Multiple Ranges
Mar 12, 2009look at the formulas in column cells G28..G33 and tell me where I went wrong.I have attached the file.
View 2 Replies View RelatedAverage Of Multiple Ranges
Jun 2, 2009I have a list of grade from 2~4 (i have long list but for sample i made it short). I want to get average of all grades one by one as well as by making some groups. Like 2,3, "2~4" (all groups) then "3~4". All the things were going nicely with a drop down menu. But when i put average on grde "3~4" only then the problem occurred. Although I've done my work but still I think there must be some improvements.....
View 6 Replies View RelatedWith For Multiple Ranges (not Using Union)
Dec 29, 2008Quick question: When using "With" is it possible to specify 2 ranges, or will I need to do 2 different with blocks? The reason I say not using Union is because I need my ranges seperate. I run 1 set of commands on Range 1, and 1 set of commands on both Range 1 and 2.
View 3 Replies View RelatedSum Same Ranges Of Multiple Worksheets IF...
Aug 27, 2009I am trying to use an ActiveX CommandButton on Sheet40 to do the following:
Sheet40 (E31:AN39) = sum of (E31:AN39) for sheets 6-15 PROVIDED that cell D3= "y" in those sheets
So the steps are:
(1) Among sheets 6-15 select those in which cell D3 = "y"
(2) Set the range of (E31:AN39) in sheet40 to the sum of the same range in the selected sheets
ie cell E31 = sum of cells E31 in selected sheets... cell E32 same... cell AN39 same
Select Multiple Ranges
Nov 9, 2009I have 2 ranges which on their own seem to work fine (I have check by just putting ".Select" at the end of both of them). The issue is that I want to apply the same border format to both ranges, however, when I try to put them together in a "With" statement it includes all of the range from the top to the bottom and not just the 2 two ranges. Ranges being used:
View 2 Replies View RelatedNEXT Without FOR When Checking Multiple Ranges
Jan 27, 2010I am getting a NEXT without FOR error message when i try to run this code. This is the portion of sub im having trouble with.. been trying to work it out but to no avail. I thought that i might have to do Next Ccell, though I got the same error.
View 2 Replies View RelatedDetermining A Set Value From Multiple Ranges?
Dec 15, 2008I am trying set up my spreadsheet so that when a number is put into one column. The next column is filled with a number that will correspond to the other number specified from a range of data.
Distance Sheet no.
55
68
93
135
186
So in the sheet No. column I want it to read the number in the Distance and put in the Corresponding sheet number.
So if:
Sheet 1 is : a distance of 1 though 20
Sheet 2 is : a distance of 20 though 40
Sheet 3 is : a distance of 40 though 60
Sheet 4 is : a distance of 60 though 80
Sheet 5 is : a distance of 80 though 100
Sheet 6 is : a distance of 100 though 120
Sheet 7 is : a distance of 120 though 140
Sheet 8 is : a distance of 140 though 160
Sheet 9 is : a distance of 160 though 180
Sheet 10 is : a distance of 180 though 200
How can this be automated without writing a ton of nested if statements.
This is an example but in reality I have 29 "sheets" with different ranges to separate.
Countif With Multiple Ranges
Jan 20, 2010Countif: Is there a way to have a single criteria (a persons name) and multiple ranges example: a6:a10 c6:c10 and recieve the sum of that criteria and ranges?? I know there is I just cant get it.
I need to count a persons name entered in multiple ranges (cells or areas) on the same worksheet. I cannot make one big range because i will need to do the same for the b6:b10 but for a different "need" the a colum and c colum bieng "completed" the b colum bieng "not completed". I have tried =countif(a6:a10 + c6:c10, cell_with _persons_name) and for obvious reasons that wont work,
VBA Hide Multiple Ranges If Then Else
May 1, 2012The else part is the part i cant get right.
Sub LabSumPTOHide()
If Sheets("Labor Summary").Range("A8").Value Like "Function*"
Then Sheets("Labor Summary").Rows("7:49").Hidden = True Else Sheets("Labor Summary").Range("9:15,24:49").Hidden = True
End Sub