Identify And Remove Rows Containing #N/A
May 25, 2006
I have a macro that performs Index&Match formulae on another workbook. This leaves me with some #N/A results. I then require the macro to delete all rows that contain #N/A. I have tried to identify these via
If Range("E" & myLoop).value = "#N/A"
and
If Application.WorksheetFunction.Isnumber(Range("E" & myLoop).Value) = False
but each one gives me a Run Time Error 13 (Type Mismatch) because, even though the results are now values and not formulae, it sees '#N/A' as an error (Error 2042).
View 3 Replies
ADVERTISEMENT
Apr 14, 2014
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
View 10 Replies
View Related
Nov 3, 2006
i have a series of colums in which i have a formula for checking if each proceding row has the same value in the cells above ie duplication. i am using the following formula
= if(and (C4=C3),(D4=D3),(E4=E3)),"yes","") although this seems to work ok, some of the cells in colums D & E are empty.
what should i do to check for this.
what i am attempting to do is check for duplicate rows where the row is only a duplicate if the previous row is identical.
View 3 Replies
View Related
Sep 4, 2007
I have two sheets with many rows and about 8 columns. The second sheet is some of the rows copied and pasted from the first sheet. I have been asked to mark on the first sheet those rows that have been copied to the second sheet.
I need to check that the entire row matches before somehow making the corresponding row in the "original" sheet stand out.
Unfortunately, there is no unique identifier that I can search by. I have tried concatenating all columns into a new column on each sheet and then using MATCH but I get #VALUE! error.
View 9 Replies
View Related
Mar 19, 2008
What is the syntax that I have to use to identify whether or not an entire column or a row is blank? Specifcally I want some code where I can say if row 1 is null, or blank then delete the entire row or. if column A is blank then delete entire column
View 2 Replies
View Related
Dec 22, 2008
I have a spreadsheet with 20+ columns. Each column contains a list of invoice numbers, eg, 1234. The lists are all of different lengths (see below). I want to find a way to find/highlight/identify those invoice numbers that appear more than once in the entire sheet (eg if invoice 1234 is listed in column B, and also in column H, and/or if invoice 5678 is listed in column A, and also in column J, and also perhaps in column D, etc.)
I've searched this forum but haven't found anything about searching for multiple duplicates in multiple columns. Ideally the matches would be highlighted in different colours, (eg all cells that contain 1234 would be red, those that contain 5678 would be blue, etc., for ease of identification) but I'm not sure if that's possible. I've attached an example that I've shaded myself to show what I mean. I've tried the MODE function but that only tells me which invoice number occurs the most.
View 5 Replies
View Related
Apr 2, 2012
Below is a same of the data I receive:
25106009 7735469 word text text
25106521 7735470 word text text
Sales Best 15hrs
25106577 7735471 word text text
Florida Drive Certificate
I need to be able to identify if a cell is text (vs. numbers) and then select all the data in that row and paste it in the first empty cell in the row above. So my data above should end up looking like this:
25106009 7735469 word text text
25106521 7735470 word text text Sales Best 15hrs
25106577 7735471 word text text Florida Drive Certificate
View 9 Replies
View Related
Feb 19, 2013
I have a spreadsheet with columns and columns of data. What I'd like to do is identify which rows have blank/no data in all specified columns (H, K, O, S, U, W, and Y).
To clarify, I need to identify each row where all of these columns are blank (as opposed to each row where at least 1 column is blank).
View 3 Replies
View Related
Jun 29, 2007
I need to identify the errors, duplicates, typos and such between two spreadsheets of over 4000 rows of data each. The Macro: I got a macro working, but it's not perfect. So far, it can only tell data that's missing on spreadsheets A, or B. However, it can't tell which are the duplicates, typos, etc. Please look at the sample for more details. The code is included in the sample. And for your convenience, it's right here:
Sub difference_general()
Dim frontcount As Long
Dim backcount As Long
Dim diffcount As Long
Dim nosrcflg As Boolean
Dim front_ref As String
Dim back_ref As String
Dim anydiffflg As Boolean
Dim ftnotexistflg As Boolean
Dim invnotexistflg As Boolean
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Sheets("Diff").Select
Cells(1, 1).Select
Rows("2:65536").Select
Selection.Delete Shift:=xlUp
Cells(1, 2).Select............................
View 2 Replies
View Related
Apr 4, 2014
I am using the following code to remove an entire row if a specific cell in that row contains "remove":
iLastRow = Cells(Rows.Count, "D").End(xlUp).Row
For i = iLastRow To 1 Step -1
If Left(Cells(i, "D").Value, 4) = "remo" Then
Rows(i).Delete
End If
Next i
However, from what I can see, it starts from the bottom and look upward, removing each line as it finds it. The problem is, there could be upward of 500 lines that need to be deleted. This coding looks and removes lines one at a time and can take a while. Is there any way I can get this done faster?
During the previous steps of my macro, I sort the column (Column D) that has the "remove" in it, so all of the "remove"s are adjacent to each other in Column D of my file.
View 5 Replies
View Related
Oct 31, 2013
I'm puzzled on coming up with a way to delete a set of rows in Excel. I have two columns like below and would like to remove the rows with the later year. Is there a formula or vba I could use to run on 5000 records?
Current table:
Job Code Id
Resource Source
77224L HIMCO
MCL-INV-SUR12
[Code]...
Desired table: [this would exclude rows where record source = MCL-INV-SUR09
Job Code Id
Resource Source
77224L HIMCO
MCL-INV-SUR12
[Code]...
View 4 Replies
View Related
Apr 26, 2006
I need to identify rows where the contents of a given cell are equivalent to the cell below. I have managed to get this working based on iterating through the cells and selecting them both for cutting.
However it doesn't work effectively: It seems to be leaving blank lines in the original sheet and further fails after the first execution. I would be grateful for any suggestions on a good method to perform the following operations:
(1)to compare the cell with the cell below
I have used
If cell = cell.Offset(1, 0) Then
(2)to act on the rows for the two connected rows
Sub Test4()
' Loop through rows
Dim TheExtract As String
Dim cell As Range
'Application. ScreenUpdating = False
For Each cell In Worksheets("Sheet 1"). _
Range("A1", Worksheets("Sheet 1").Range("A65536").End(xlUp))
TheExtract = cell
If cell = cell.Offset(1, 0) Then
cell.Rows("1:2").EntireRow.Select
Selection.Cut
Sheets("Test").Select
ActiveCell.Offset(3, 0).Rows("1:1").EntireRow.Select
Selection.Insert Shift:=xlDown
End If
Next cell
'Application.ScreenUpdating = True
End Sub
View 3 Replies
View Related
Mar 29, 2007
How to remove unique rows from excel-table and leave only dublicates? any macros?
View 9 Replies
View Related
Jun 10, 2008
I have a customer database that is sorted by phone number. How do I remove duplicate rows.
View 9 Replies
View Related
Jun 20, 2008
I have data in a 3 column by massive amount of rows (10000+) periodically there is about 6-11 rows of 'header' data which needs to be removed. this is a report run monthly so doing this over and over drain time. I need to create a query that will find all of these rows and delete the entire rows.
View 9 Replies
View Related
Apr 27, 2006
I have a worksheet that collects information from another using complex formulas.
In column A I have codes i.e. PRD001A, PRD001B etc. A block of codes starts at A and can go up to Z. i.e. PRD001 could start WITH PRD001A and finish with PRD001N then there is always a PRD001W and PRD001Z to finish with.
PRD002A would follow PRD001Z and might only have A, B, W & Z codes before PRD003A.
In column K is the sum of columns D:J.
What I want is a macro that will look at column A & K and if all OR some of the codes for say PRD001 are >0 don't delete any of the rows for that group of codes.
Then look at column A & K and if all of the codes for say PRD002 =0 delete all of the rows for that group of codes.
View 9 Replies
View Related
May 15, 2006
Sub Remove_E_H_Ts()
Application. ScreenUpdating = False
Dim x&
For x = Cells(Rows.Count, 2).End(xlUp).Row To 2 Step -1
With Cells(x, 2)
If Left(.Value, 1) = "E" Then ' i need to add If Left(.Value, 1) = "E" or "H" or "T" Then
.EntireRow.ClearContents
End If: End With: Next x ' after clear contents how can i remove blank rows ?
Application.ScreenUpdating = True
End Sub
i am trying to make this line of code work below....
If Left(.Value, 1) = "E" Or "H" Or "T" Then
then also after clear contents how can i remove blank rows ?
View 6 Replies
View Related
Nov 11, 2006
I have a large file and I am doing a subtotal here. I want to do further processing of the "subtotal" data (basically, I want to sort the list on the subtotalled sum values) and I would like to know if there is any method to delete all rows except the "subtotal" rows from the sheet other than the method described here, in another post in 2003.
Copy subtotals only - visible cells too complicated [SOLVED]
This works fine but I have the word Total in some of the columns I am sub-totalling.
Also, some of the entries in that column are very long strings to start with and when the subtotal is made by Excel, the details are truncated (probably to 255 characdters) and the word Total is not there.
View 7 Replies
View Related
Aug 12, 2008
ive got a spreadsheet with records such as this
james - smith - leeds- 01535 - 26/02/1983 - bd21 6ls
steven - smith - bradford - 213789 - 28/01/1982 - bd33 5th
james - smith - leeds - 01535 - 26/02/1983 - bd21 6ls
steven - king - manchester - 213789 - 28/01/1982
andrew - wright - bingley - 36473 - 12/01/1981 - bd23 689
what im trying to do is to check all of the rows for duplicates in such a way that (if any row has the matching colums 1,2,5 and 6 then all but 1 of the rows will be deleted.
i have a few thousand entries and am just trying to get rid of all the duplicate rows. The problem is that the duplicate rows are not IDENTICAL for instance soime of them may have spelling mistakes hence i cannot just do a straight forward if row = row then delete.
View 4 Replies
View Related
Jan 12, 2010
I am attempting to design 2 combo boxs by which you can select from a number of equipment types and a criticality:
Equipment Types Criticality
Vac Pump 1A
Filter Dryer 2A
Valve 3A
I want to attempt to write a macro so that when the equipment type and criticality has been selected, a corresponding number of rows will disappear.
For example:
If Vac Pump and 1A are selected then all the rows from 70 downwards will be hidden, and if Filter Dryer and 2A are selected, then the rows from 6 to 38 and from 47 onwards will be hidden.
View 10 Replies
View Related
Jan 30, 2014
I have a workbook with 7 different Sheets to pull data from. On Sheet 3 named "PMP Mileage Linear". I have 4 drop down boxes. In one drop down labeled "Drop Down 4" there are 21 different choices to choose from. Based on the choice I would like to hide or unhide Rows. Example: if a user chooses "3yr/36,000 Miles". I would like to hide rows 16:51. If a user chooses "3yr/60,000 Miles". I would like to hide rows 29:51 (hence un-hiding 16:28). If a user chooses "5yr/100,000 Miles" I would like only rows 41:51 hidden and so on until a user hits the max of 125,000 Miles (5,6 or 7Yr) whereas no rows are hidden. I would have attached the spreadsheet but I don't have permission from the people who own the data.
View 7 Replies
View Related
Feb 7, 2014
I have a spread sheet which has a range as shown below.
Batch NumberItem 1Item 2Item 3
P155635
P254
P378
P2568
P454
P389
P385
I need to get the output as shown below which is for Batch number P2 I need to include Item 1 (568) in one row and delete the other P2 row. similarly I need to do for P3. The end result will be as shown below.
Batch NumberItem 1Item 2Item 3
P155635
P256854
P3898578
P454
View 8 Replies
View Related
Feb 24, 2014
I can't get rid of the alert "Delete entire sheet row" using DisplayAlerts = False. Here is my code:
[Code] .....
View 4 Replies
View Related
Mar 9, 2014
I need to remove the you tube link which is on some rows
Row 9:
[Code] .......
Attached File : Description.csv
View 10 Replies
View Related
Dec 13, 2007
Im not strong in excel, that why Im here. So:
I work every day with big amount of item numbers and lists in excel and I need some macro or code to automatically remove rows, containing unwanted text.
Example:
MEMORY DIMM 512MB PC3200 DDR
MEMORY DIMM 512MB PC6400 DDRII
MEMORY DRIVE FLASH USB2 2GB
MEMORY MINI SD 2GB W/ADAPTER
MEMORY SECURE DIGITAL 2GB
MEMORY DIMM 1GB PC6400 DDRII
MEMORY DRIVE FLASH USB2 1GB
MEMORY DRIVE FLASH USB2 1GB
So I paste the text from my database, and want to automatically delete rows containing DIMM string. How can I do it?
p.s. is there also a way to leave only the rows I want?
View 9 Replies
View Related
Nov 20, 2008
I'm trying to loop through each row in a listbox on a userform and remove the value if it isn't equal to the year shown in a CBYear. i can't sem to figure out what to use in my for statement to point the VBA to the Row as it were
View 2 Replies
View Related
Dec 15, 2012
share a code to remove BLANK ROWS.
I have data on ROW#1, #5, #10...etc,etc.. I want to remove rows in btwn (which is blank) Instead of doing manually
View 2 Replies
View Related
Aug 8, 2007
I am using three columns - Col A contains serial number, col B contains name and Col C contains Codes.
The problem is in col C as sometimes the codes are copied from other files also. So I want that if there is any duplicate codes in column C, on running the macro it will delete the duplicate rows and keep original record ie the duplicte records added later has to be deleted and that the original record will be in place.
View 9 Replies
View Related
Aug 24, 2008
I have 6 columns on my data sheet. F column is Amount column.
If there are rows where all the columns A,B,C,D and E duplicate then I need that row to be deleted, BUT before that the value from the column F should be summed to the duplicating row's F column.
I attached a simple example file, where you can see my point better. (I need the code to work with thousands of rows, and not only with 5 rows which i put on the axample)
View 9 Replies
View Related
Oct 25, 2006
I have a spreadsheet with various hidden rows and columns that I do not wish the user to have access too as it contains too much detail for their purposes.
Copy/paste and copy/paste special also copies across the hidden columns and rows so what I need to do is to copy it to a new workbook but then remove the hidden rows and columns and just delete the existing formulas in the cells which total the data and insert a new autosum.
View 3 Replies
View Related
