Making Checkbox Be On Or Off Depending Upon Value In Another Cell
Jun 15, 2012
What I would like to to in Excel:
When I leave the current cell,
1. evaluate the contents of the cell I am leaving (essentially determining if it is empty or not)
2. If it is empty, do nothing
If it is not empty (or maybe if it has a number value in it)
3. Then uncheck a box (a check box form control)
In Access, I would enter code in On Leave property. It would essentially change the value in the text box that would be named or have some other unique method of identifying it.
So I have two issues:
1) In Excel, I do not know to make a macro fire upon leaving a cell
And
2) I do not know how to refer to the properties of a specific check box control. that is, there will be many of them in the spreadsheet and I do not see how to name them. Clicking of properties for the check box gave no hint of it.
View 3 Replies
ADVERTISEMENT
May 19, 2009
I have a checkbox with a userform. I can get it so that if I enable it and add data then it correctly shows as "Yes" or "No" within excel. However if I open the data using offset the checkbox is greyed out with neither Yes or No. Is there a way to make the checkbox allow and show a value of Yes/No?
View 7 Replies
View Related
May 18, 2009
It might be very simple, but all I need is if I have data on A1, and i have 3 check boxes labeled: NEW, EXISTING, and ARCHIVED. I want it to automatically check the corresponding boxes. So if "NEW" is typed under A1, it'll check "NEW" box. "EXISTING" will check "EXISTING" check box and so on.
View 4 Replies
View Related
May 30, 2014
Im looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
View 1 Replies
View Related
May 9, 2006
I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies
View Related
Feb 25, 2009
married, widows, single checkbox is selected
macro solution
good work.
View 5 Replies
View Related
Apr 16, 2014
I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False
[Code] .........
View 9 Replies
View Related
May 18, 2014
I have a spreadsheet with some cells which return values using INDEX and MATCH to bring back the entire details of a person based on there membership number. However I require the comments to be attached with the returned values. The comments have there image in, rather than just text.
I have found some answers with vba, which do the process, however you had to manually enter the cell, from which the comment was to be copied from, into a pop up box. This involved finding the box myself to then select the box to take the comment from. In doing this I had found and read the comment, which is the is the process I'm trying to bypass.
View 8 Replies
View Related
Aug 21, 2012
In Column B of my spreadsheet i have a drop down that only allows users to enter "Yes" or "No"
Is it possible to make Column C a required field if "No" is selected in column B.
So basically if cell b4 is "No" then i want to make it manditory that cell C4 is filled out with a reason why.
Same thing for cell b5 then i would like cell c5 filled out before they continue using the sheet. etc.
View 1 Replies
View Related
Nov 23, 2008
i have a cell "h23" that must always start with a "j" or a "J"
the trouble is some of my users are only putting in the number
ie 2345 when it should be j2345 or J2345
View 3 Replies
View Related
Jun 2, 2009
I have a table which as a few columns, the left column is called name and the far right one is called email. The name cells have a drop down list which refers to another workbook with peoples names, when you select a name other cells are automatically populated using the vlookup function such as phone number, email etc. In the workbook it is referencing too with all the data, the email address are like a hyperlink which creates an outgoing mail if you click on it, is there a way to have this in the table as nothing happens when you ckick on the text.
View 6 Replies
View Related
Feb 19, 2007
I have a spreadsheet with about 1000 rows. This is data that I've imported from another source and there are blank rows scattered throughout. I am trying to add columns together, but when I cut and past the sum formula, I end up with a 0 in a cell that should be blank. I've tried various iserror, isblank, isnull, empty functions, but am still getting a 0.
Here my example of one function I've tried:
a b c
1. 50 50 50 =if(isblank(a1:c1)," ",sum(a1:c1)) 150
2. 20 20 20 =if(isblank(a2:c2)," ",sum(a2:c2)) 60
3. =if(isblank(a3:c3)," ",sum(a3:c3)) 0
I would like that zero answer in row 3 to be blank otherwise I have to manually go through all the rows and delete these 0's out or cut and paste the sum function just on the rows with numbers.
View 9 Replies
View Related
Dec 14, 2008
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
View 6 Replies
View Related
Jan 27, 2014
In a macro I want to automatically insert a formula in several cells. The formula depends on other cells, and I want to be able to manipulate these cells with variables. Here is my code:
[Code] .....
All my variables are declared:
Sheets("DATOS YTD 2014").Cells(I, Semana + 1) is the cell I want to be able to chose due to the variables
Sheets("DATOS YTD 2014").Cells(I, 3) is the reference cell for the VLOOKUP formula, that will vary with I
SheetMonth.Range("B3:W172") is a range in the sheet SheetMonth which is fixed
The error message I receive is the following: "Run-time error 13, Type mismatch"
I precise that the next step is to make the ",6," part in the vlookup formula also variable... but I guess once my current issue is solved this one will be a piece of cake.
View 3 Replies
View Related
Oct 22, 2008
I set the time format to hh:mm:ss.000 to show also the milliseconds.
How can I get the milliseconds to another cell for making some calculations?
View 8 Replies
View Related
Mar 16, 2009
I have a chart with blank values in some cases. I have set up the chart to show those values as gaps, which relies on the blank cell being empty. However, my blank cells have a formula along the lines of: if (condition,value,"")
So the chart does not consider them blank, presumably either because the formula is in there, or because "" is not the same as blank. How can I make this cell appear blank for the purposes of the chart?
View 5 Replies
View Related
Nov 26, 2006
The following cell formula calls a fixed range of cells to execute the associated User Defined Function. The problem is that the data set sometimes covers a wider range and sometimes a smaller range. The cell formula is:
=Smooth(a,g,bw,Trends!A8,Trends!$A$8:$A$190,Trends!$I$8:$I$190)
This requires going in manually each time and readjusting the ranges for Trends!$A$8:$A$190 and Trends!$I$8:$I$190. ( X and Y values for the function)
Is there a way read the data length and have the cell formula adjust based on the actual data range?
View 9 Replies
View Related
Jun 27, 2006
referencing a cell and making a hyperlink...
i'm using the following code to try to make a hyperlink out of a19...?
myhyperlink = Range("a19").Hyperlinks
View 6 Replies
View Related
Jul 1, 2014
I have this worksheet with 2 buttons and 2 textboxes.the first button is named search literally to search the items inputted in the textboxes and the second button is clear which clear all the inputted items in the textboxes and the search field. I manage to code those things however I have a main problem. How am I suppose to linked a checkbox with those items?
For example I searched this particular item so the checkbox corresponding to that item must show up in the left most column of it. and if I searched multiple items those checkboxes must show up too. I am having a hard time coding and trying since I am new in vba. I also attached a sample worksheet. I am using excel 2007.
Search.xlsm
View 1 Replies
View Related
Mar 14, 2013
I have this project for work where on one sheet information is put in by typing AF, CF, WF. I need to have Excel read the AF, CF, WF and make that read as the full word. Is there anyway to do that? I can get my boss to have people just put A, C, W
View 8 Replies
View Related
Jan 8, 2008
Triggering a message box. one of the worksheets in my workbook is called Update Comments - this is a sheet that contains data in the following format (headers)
B7 = Week Number
C7 = W/C
D7 = Update Due
E7 = Updated By
G7 = Update Comments
I have a formula in column D (beginning D8 and copied down for the year) as follows:
=IF(AND(C8
View 9 Replies
View Related
Feb 10, 2008
I have a conditional IF statement, where I want the content of the cell to be blank if the result of the IF statement is false, ie I want the content of the cell to be as if there were no formula in the cell (this if so that the formula COUNTA(Sheet1!$B:$B) only counts the cells where the result is TRUE).
For example, IF(A1=1,1,"") where A1 1, the content of the cell will have something in it (a space), and won't be blank.
View 9 Replies
View Related
Aug 28, 2013
I'm looking for a way to make a cell copy the fill color from an adjacent cell.
in my case, cell A1 is a dropdown menu cell, where each option has a different fill color (through conditional formatting). what i want is to make cell B1 copy the fill color from cell A1 automatically. it may be important the both cells have dropdown menus.
View 3 Replies
View Related
Feb 16, 2014
I have drop-down list in cell C4 and inserted Checkbox next to it. Drop-down list has a blank default value. I want Checkbox to be ticked If value in C4 is not blank. My code so far is:
[Code] ......
I attached sample spreadsheet : EF989727_re.xlsm
View 12 Replies
View Related
Jan 22, 2008
I am writing some VBA code in Excel 2007 and am stuck on a property with the standard form check box (not OLEObjects).
I would like to check and find out what the value is of the linked cell for a checkbox...
Like, if a user clicks the checkbox, it changes the linked cell value to true or false... But I cannot figure out how to "lookup" or "go and get" this true or false value through code...
View 9 Replies
View Related
May 16, 2009
I'm trying to achieve a search of a sheet using a selection in a listbox on my userform and then return a value of 'true or false' to my checkbox.
My code is below;
With Sheets("JobChecklist")
Set r = .Columns("b").Find(Me.ListBox3.Text, , , xlWhole)
If r Is Nothing Then
Exit Sub
End If
ff = r.Address: n = 0
Do
n = n + 1
ReDim Preserve a(1 To 6, 1 To n)
For i = 1 To 3
a(i, n) = r.Offset(0, 1).Value
Next
Set r = .Columns("b").FindNext(r)
Loop Until ff = r.Address
End With
With Me.CheckBox30
If a.Value = True Then
CheckBox30.Value = True
Else
CheckBox30.Value = False
End If
End With
End Sub
View 9 Replies
View Related
Jan 10, 2014
I am trying to make the contents of a cell into a chart title.I know I can do it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=tab_name!R2C1"
However, I am trying to use the same macro on several different tabs in the same EXCEL worksheet. Obviously, I can't have the tab name in the macro. But, I don't get a title at all when I try to remove it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=R2C1"
or
ActiveChart.ChartTitle.Select
Selection.Caption = "=A2"
Is this possible? I am (kinda new at) using EXCEL2010.
View 3 Replies
View Related
Oct 15, 2007
I have a data validation list in cell D11 on sheet "Data Entry" and a command button "btnMultipleProperties" that I only want visible if "Multiple" is selected in "D11" I have the below code in "This Workbook" in VBE but it doesn't work. What did I miss?
Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Data Entry")
If [D11].Value "Multiple" Then
btnMultipleProperties.Visible = False
Else: btnMultipleProperties.Visible = True
End If
End With
End Sub
View 8 Replies
View Related
Aug 18, 2014
I need a checkbox (actually a few but I will use the same code and change the name and cell reference) to do the following
Checkbox in A1 is ON by defaultB1 is 100User can free change the value of B1 when checkbox is onWhen checkbox is OFF"100" (or whatever number entered by the user) gets storedB1 changes to a relatively large number "9999"B1 changes cell color to grey and is locked for editWhen checkbox is ON againThe value stored previous to checkbox turned OFF is restored back to B1B1 changes back to normal cell color (no fill or white)B1 is unlocked and user can edit the cell
View 5 Replies
View Related
Sep 25, 2007
I need to be able to select a checkbox on my form and when selected, fill data from other cells on the form to other cells. Here is what I have so far
Sub CheckBox1_Click()
If CheckBox1.Value = True Then
Cell(F13).Value = Cell(B13).Value
Else If CheckBox1.Value = False Then
'do nothing
End If
End Sub
But it does not work I get a compile error on the: Cell(F13).Value = Cell(B13).Value
View 2 Replies
View Related
