If Loop Checking The Formatting Of Cells
Feb 10, 2009
I am having trouble with several IF..THEN..ELSE loops in my code, all of which are pritty much the same. I need to find rows that are formatted in a certain way, in the example below this is a clear background and Black text. I know the loop works because i have tested it without colours on a test workbook, and i know the colours are correct, but it keeps skipping over the condition, regardless of the outcome. All the variables shown are declared correctly before the loop is entered.
View 2 Replies
ADVERTISEMENT
Jul 9, 2012
I am trying to create conditional formatting to ascertain whether values in one table (Table 1) are different from another identically formatted table above it (Table 2) (so each cell in Table 1 has a corresponding cell in Table 2).
If the value in a cell in Table 1 is different from its corresponding cell in Table 2, the cell should highlight in red.
Every cell's corresponding cell is the same distance away.
I tried to put in a conditional formatting for C5 (C5 being the first cell in Table 2), which works, but this breaks and turns to #REF every time i save and re-open the document.
View 2 Replies
View Related
Nov 12, 2008
I have two tables of information. The first is a matrix with some distances. The second is a table of distribution. Ive been trying this for a long time now with limited success using a truth table but i've realised the only way to do this is in code. Ive got limited experience with this so please point me in the right direction.
Ive written some steps explaining what each table does here -
Step 1Check for lowest value B4:F4 in Table 1 (in example is 10)
Step 2Check corresponding column destination available capacity in table 2 (Example 500)
Step 3Distribute as much as possible from source in table 2 (500)
Step 4Reduce value in capacity line by value taken from source
Step 5If some source remains move back to table 1 and find next nearest column Dest
Step 6Repeat step 2 until all source is gone in row
Step 7 Check for lowest value B5:F5 in Table 1
if run out of capacity at all sites stop code
etc
until Table 1 column B is empty
Ive posted a spreadsheet with some before and after tables in it aswell. Its very small and formatted o its easy to see whats happening.
View 14 Replies
View Related
Mar 12, 2007
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data.
Sub movedata()
Range("A1:H1").Select
Selection.Copy
Sheets("Sheet2").Select
ActiveSheet.Paste
Sheets("Sheet1").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Range("A1").Select
Sheets("Sheet2").Select
Rows("1:1").Select
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets("Sheet1").Select
End Sub
View 9 Replies
View Related
Jul 18, 2014
So I would like to automate the following, as doing it by hand takes a lot of time. I have searched the whole internet and finished empty handed.
Start from cell E10
Select cell
Move 3 cells down
Select cell
Move 3 cells down
Select cell
Move 3 cells down
Select cell
Move 3 cells down
Select cell
Move 3 cells down
Select cell
Move 3 cells down
Select cell
Apply double entry conditional formatting
Move 3 cells down
Repeat above until cell E5000
View 4 Replies
View Related
Mar 30, 2009
I have a sheeet conditionally formatted so that if data is missing from certain cells, that cell turns 'red'. Is it possible to have cell A1 (for instance) report if there is a red cell anywhere on the sheet?
View 4 Replies
View Related
Jun 10, 2009
how to check that the formula in the cell1,cell2,cell3 in first row is same in next rows.For example how to check that formula's in c2,d2,e2 is same as c1,d1,e1 and c3,d3,e3 is also same as c1,d1,e1.
View 9 Replies
View Related
Aug 30, 2006
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
View 7 Replies
View Related
Feb 7, 2008
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies
View Related
Oct 9, 2008
I have an Excel sheet set up with 6 columns: Col A contains a user-entered date.
Cols B-E each contain a drop-down that the user can set to 1 of 4 options.
Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
View 4 Replies
View Related
Dec 18, 2009
I want to create a nested IF formula that checks for blanks in three cells.
If A1=Not blank, then enter in "Live"
else
If B1=Not blank, then enter "Signed"
else
If C1=Not blank, then enter "Interested"
else
enter blank into cell
View 2 Replies
View Related
Feb 21, 2010
I have a list of dates in a column, and am wanting to compare them against today() in cell A1. If any of the dates are in the past, it returns a FALSE, if all of the dates are in the future, it returns a TRUE.
View 7 Replies
View Related
Aug 24, 2013
I would like to check if selected cells is a union of several ranges or one solid range. I am sure there is a way, but did not manage to find it. How to do it?
View 2 Replies
View Related
Dec 27, 2013
I'm trying to make a game where from a choice of 16 words the contestant has to choose four of those words that, when another word is placed before or after each word it makes a phrase.
e.g From this list of 16 words
albert
bell
[Code]....
choosing bell, bottle, print, stocking can all have BLUE placed before them to make bluebottle, blueprint etc. That would be the correct answer. Choosing their four words would be from a drop down list of all 16 words, separate cell for each list options/chosen answer. bell bottle printstockingCORRECT
There would be 4 rows in total for 4 different answers to be made from the 16 words on offer. I have tried everything to get it to work in the 5th cell but it's difficult.
View 3 Replies
View Related
Jan 26, 2014
I am checking whether or not two different cells contain a number or the error #NA.
If one of the cells contains a number then the result will be that number.
If both cells contain #NA then the result should be “99”
Example:
Formula in Column C
The values are in columns A and B.
If the value in cell A is a number the result is A.
If the value in cell B is a number the result is B.
If the value in cell A and B equal #NA the result is 99
View 6 Replies
View Related
Oct 15, 2013
Basically I'm doing a excel spreadsheet where i have a range of cells where we can input some figures or amount. If the cells they indicated exceed a certain amt example: 800, i would want it to show an error msg. I know it maybe sound simple, but have been using the if and countif formula which keep on showing error to me.
View 3 Replies
View Related
Oct 4, 2007
I am creating an excel application and have come a bit stuck. I would like to able create a macro button for printing a blank version of the workbook...when I say blank I mean the cells that the end user is able to type into.
I think I am able to do this providing all the cells are on the same sheet as the button using this ...
View 10 Replies
View Related
Mar 21, 2014
Is there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
View 5 Replies
View Related
Feb 9, 2007
I have the following macro:-
ActiveSheet.Select
ActiveSheet.Copy
Columns("A:D").EntireColumn.AutoFit
Range("A2:B500").Select
Selection.Sort Key1:=Range("B2:B500"), order1:=xlAscending, Key2:=Range("A6:A250"), order2:=xlAscending
Within this I would like to add a couple of features which check:-
1) If there is a number in column A - there should be one in column B
2) The numbers in column B are sequential i.e. 1, 2, 3 etc without any gaps in the sequence
View 9 Replies
View Related
Apr 26, 2007
I created a macro to save my spreadsheet into another book, but I first want to check if cells Z2 & Z3 are blank, and if Z4 = "$--k". If any of those conditions are true, I want a messagebox sent to the user to please fill in data in those cells, and exiting the sub( ) preventing the save from happening. The messagebox would say "Blank Info", vbOKonly button, Title would be "Fill in data".
View 2 Replies
View Related
Aug 2, 2008
I have a report that includes data broken up by several headings. Instead of showing the heading and the data below it, I would prefer that the heading was included in every subsequent row that it related to (and the heading be removed).
All the headings are in italic non bold format.
All the data is in standard format (no bold / italics / underline).
The only data in the sheet is as above, and there are no gaps in the data. A heading will relate to all the data directly below it until there is a new heading.
View 8 Replies
View Related
Feb 25, 2010
I have a complex sheet where rows are continuosly overwritten and new data needs to be formatted each time. My macro works great aside from the fact the conditional format formula expression adds double quotes rendering the conditional format useless. After running the macro I can go into the conditional format field, remove the quotes, and the formatting formula works as expected. So...I first did a "record macro" to grab the code for conditional formatting:
View 2 Replies
View Related
May 15, 2009
1. Delete all data after row 51.
2. Find the average cost (column 4) and delete all rows where the cost is below average. Thus only retaining rows with an above average cost.
3. Then I want to conditionally format any number in column 6 which appears more than three times.
4. I want to loop this through all worksheets in my workbook.
View 9 Replies
View Related
Oct 20, 2006
I looked though the site with the search and saw some things that came close, but no cigar.
I have a column of numbers formated in a constant string
eg 1234121231234
The number needs to be formatted into four sections
eg 1234-12-123-1234
I have the code to put the dashes in, but I am looking for the loop statement to take it down column C reading in each number in the 1234121231234 format until the end, and replacing it one by one with the 1234-12-123-1234.
' calls the function to put the dashes in the NSN in the QRL
'First 4 of NSN
first4 = Left(NSN, 4)
'Second2 of NSN
nsn9 = Right(NSN, 9)
For Y = 1 To Len(nsn9)
second2 = Left(nsn9, 2)
Next Y
'Next3 of NSN
nsn7 = Right(NSN, 7)
For Y = 1 To Len(nsn7)
next3 = Left(nsn7, 3)
Next Y
'Last4 of NSN
last4 = Right(NSN, 4)
dash = "-"
NewItem = first4 + dash + second2 + dash + next3 + dash + last4
View 4 Replies
View Related
Sep 16, 2013
A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
dust 1.xlsx
View 2 Replies
View Related
Nov 17, 2011
Working in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
View 5 Replies
View Related
Jul 18, 2006
Is there a way to set up a conditional format for several cells so that the cells are filled in with red until the user enters text in those cells??
View 5 Replies
View Related
Jul 2, 2014
So i've been trying to do this invoice/inventory/client , I couldn't find a way to somehow register the whole invoice as it is, so i can later print/visualize it if i lost the copy or something.
It would be best if it just stayed stored in a variable and not always visible, and only appeared if i wanted to check/print it.
The whole invoice would be from A1 to F30
Excel 2010 btw
View 5 Replies
View Related
May 3, 2013
What I am looking to do is;
If cell A2 = "Closed"
then I want cells B2 and C2 to strike through its own text.
I.E.
A2= anything other than "Closed"
then B2 and C2 = Blah blah blah
but if
A2 = Closed
then B2 and C2 = Blah blah blah
View 5 Replies
View Related
Jan 30, 2010
Not sure what is missing here, but this will only highlight duplicates on the active sheet and won't cycle thru all worksheets in the workbook.
View 2 Replies
View Related
