Is there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
View 5 RepliesI have an Excel sheet set up with 6 columns: Col A contains a user-entered date.
Cols B-E each contain a drop-down that the user can set to 1 of 4 options.
Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
I have a list of dates in a column, and am wanting to compare them against today() in cell A1. If any of the dates are in the past, it returns a FALSE, if all of the dates are in the future, it returns a TRUE.
View 7 Replies View RelatedOn the attached example i am concatenating surname with the first letter of the forename. However, what i want to add into the formula is if the answer is a duplicate of another answer in a range that these duplicates are changed to surname and full forename.
Is this possible with a formula or would it need a bit of vba programming?
Basically I'm doing a excel spreadsheet where i have a range of cells where we can input some figures or amount. If the cells they indicated exceed a certain amt example: 800, i would want it to show an error msg. I know it maybe sound simple, but have been using the if and countif formula which keep on showing error to me.
View 3 Replies View RelatedI have a workbook with 2 sheets. What I want is:
1. Cells in column A, Sheet 2 are compared with the Cells in column A, Sheet 1.
2. Sheet 3 is produced containing all the rows in Sheet 2 for which there is no duplicate cell in Column A, Sheet 1.
3. The rows copied from Sheet 2 to Sheet 3 are highlighted on Sheet 2. Attached is a workbook with 3 sheets. Sheet 3 is the desired result (+ the cell highlighting on non-duplicates on Sheet 2).
I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).
View 2 Replies View RelatedI am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:
One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..
The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?
I have a report that includes data broken up by several headings. Instead of showing the heading and the data below it, I would prefer that the heading was included in every subsequent row that it related to (and the heading be removed).
All the headings are in italic non bold format.
All the data is in standard format (no bold / italics / underline).
The only data in the sheet is as above, and there are no gaps in the data. A heading will relate to all the data directly below it until there is a new heading.
I found this formula =SUM(1/COUNTIF(A1:A17,A1:A17)) onlinesometime ago and have been using it regularly. It counts the number ofduplicates in a range of cells. I have been trying to modify this formula sothat it only looks at the first two characters in the cell. So, instead 7duplicates it would return 5 duplicates because the formula would only belooking at the first 2 characters in the cells.
A
1
GD020T01B02
2
GD020T01B02
3
GD020T01B02
[Code]...
if I have a column of 5 cells (E1-E5) that contain a single character, how would I search a range of columns and rows (A1/5 - D1/5) with these?
So if E1-E5 each contain "1", i would like to return true when one (or more) of the A - D columns also contain "1" in each of its cells.
Columns A - D will contain a string of more than one character so it needs to search the string.
e.g.
E1 = 1
E2 = 1
E3 = 1
E4 = 1
E5 = 1 and
A1 = 123
A2 = 134
A3 = 142
A4 = 412
A5 = 213
I would like this to return true because the A cells do contain the values in the E cells.
I guess this is like looking for duplicates but with a search string twist!
I need a code to delete all duplicates (all cells) in the range A1: F100?
Exemple:
Before
31
81
43
[Code]....
How I can create a simple formula to count unique values/text within a range of cells that contain duplicates, blanks and errors?
For e.g., in Column A (row 1 - 10):
Proj-001
Proj-001
Proj-002
Proj-004
#N/A
#N/A
Proj-007
Proj-002
I have this macro when run copys and pastes values for a row of cells onto another sheet. However if 2 cells in the same row have a number greater than zero. It duplicates the entry. What I need is some sort of check that says if 2 or more cells in the same row have a number greater than zero just copy that row once only.
View 3 Replies View RelatedI have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.
Teh StandHTML then gets used in the body of the email like other HTML items I use
The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.
Dim Myrange As Range
Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select
If Myrange = "x" Then
StandHTML = StandHTML & "Important Text"
End If
All it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
I want a VBA that searches for duplicates, triplicates, or more and combine the cellvalue that is next to the duplicates. Also, if it combines them, it should only use the last letter. I have a code that works partially, but I'm stuck.
For example, I have this list:
1
2014A
2
2014B
3
2014C
1
2014D
4
2014E
1
2014F
I want it to combine the A, D and F like this:
1
2014A
1
A/D/F
2
2014B
[Code] .......
I created the following script, but i can't get it to use the last letter. Also it creates a " / / " when the cells are empty.
I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next
In our program it is essential that only data is entered for the current week.
I need code that if a date is entered into "cell C1",that it will evaluate this value and compare and assure that it is between the dates in Range D1:E1 (upper and lower values)
If it is between these two dates, nothing happens and you can proceed to enter data.
If it is not message -Invalid date entered. Proceed? If "Yes" nothing happens and you can proceed to enter data! If "No", then the value in cell C1 is set to nothing and allows you to enter the correct date.
I need to be allowed to enter an incorrect date at times,to review and check previous entries, 99% of the time it must be between the start and stop date.
i need to check a date within a multiple range of dates using certain key.
i've tried vlookup, but failed to get correct answer.
here is Table1
product (cell=A1)
date (cell=B1)
plan(cell=C1)
A
20080801
A
20090801
A
20090901
A
20090831
A
20090101
A
20091101.....................
I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
how to check that the formula in the cell1,cell2,cell3 in first row is same in next rows.For example how to check that formula's in c2,d2,e2 is same as c1,d1,e1 and c3,d3,e3 is also same as c1,d1,e1.
View 9 Replies View RelatedI want to create a nested IF formula that checks for blanks in three cells.
If A1=Not blank, then enter in "Live"
else
If B1=Not blank, then enter "Signed"
else
If C1=Not blank, then enter "Interested"
else
enter blank into cell
I am having trouble with several IF..THEN..ELSE loops in my code, all of which are pritty much the same. I need to find rows that are formatted in a certain way, in the example below this is a clear background and Black text. I know the loop works because i have tested it without colours on a test workbook, and i know the colours are correct, but it keeps skipping over the condition, regardless of the outcome. All the variables shown are declared correctly before the loop is entered.
View 2 Replies View RelatedI would like to check if selected cells is a union of several ranges or one solid range. I am sure there is a way, but did not manage to find it. How to do it?
View 2 Replies View RelatedI'm trying to make a game where from a choice of 16 words the contestant has to choose four of those words that, when another word is placed before or after each word it makes a phrase.
e.g From this list of 16 words
albert
bell
[Code]....
choosing bell, bottle, print, stocking can all have BLUE placed before them to make bluebottle, blueprint etc. That would be the correct answer. Choosing their four words would be from a drop down list of all 16 words, separate cell for each list options/chosen answer. bell bottle printstockingCORRECT
There would be 4 rows in total for 4 different answers to be made from the 16 words on offer. I have tried everything to get it to work in the 5th cell but it's difficult.
I am checking whether or not two different cells contain a number or the error #NA.
If one of the cells contains a number then the result will be that number.
If both cells contain #NA then the result should be “99”
Example:
Formula in Column C
The values are in columns A and B.
If the value in cell A is a number the result is A.
If the value in cell B is a number the result is B.
If the value in cell A and B equal #NA the result is 99
I am creating an excel application and have come a bit stuck. I would like to able create a macro button for printing a blank version of the workbook...when I say blank I mean the cells that the end user is able to type into.
I think I am able to do this providing all the cells are on the same sheet as the button using this ...
I am trying to create conditional formatting to ascertain whether values in one table (Table 1) are different from another identically formatted table above it (Table 2) (so each cell in Table 1 has a corresponding cell in Table 2).
If the value in a cell in Table 1 is different from its corresponding cell in Table 2, the cell should highlight in red.
Every cell's corresponding cell is the same distance away.
I tried to put in a conditional formatting for C5 (C5 being the first cell in Table 2), which works, but this breaks and turns to #REF every time i save and re-open the document.