Ignore Inconsistent Formula
Aug 15, 2007
I want to stop those little green error checking markers in the top corner of cells from appearing in my spreadsheet. My formula is correct however the error markers appear in 40(ish) cells and make it look very untidy. I know there is the option of turning background error checking off, however isn't appealing to me as I have other worksheets where I want to check for errors. Also, my report is used by 20 people so I can't change the options which might affect other reports they may have.
What I'd like to do is either turn off the option for one specific worksheet, or add a few lines of code which sets the cell properties to ignore the error for each of the cells affected. I've tried to use macro recorder to work out how to ignore a cell but it doesn't record anything for this action. Is anyone aware of the correct piece of code to carry out this action?
View 2 Replies
ADVERTISEMENT
Jun 7, 2007
I have used a formula in a cell, the error option button appears at the corner of that cell, it is working well but showing Inconsistent Formula
View 7 Replies
View Related
Mar 2, 2014
Let's say I have a set of values (A1:A10) where each contains a number, with a varied amount of decimal places (some may have 0, some may have 10)...how can I make a formula in cell B1 that averages A1:A10, ignoring the decimal places (rounding to the nearest whole number)
For example, if this was A1:A10
93.11
94
92.12321
95.1
96.7
98.1
99
100.03
88.6677
85.6675
If I did the Average (=AVG(A1:A10)), I would get 94.2498. But I don't want this, I want the formula to take into account the numbers rounded to the nearest whole number, meaning, I want to take the average of..
93
94
92
95
97
98
99
100
89
86
Which would give me a value of 94.3.. In this example, there isn't much of a difference, but I was simplifying the numbers for time sake
View 1 Replies
View Related
Aug 14, 2008
Working on athletics worksheet. Have worked out a formula to attribute a PB (Personal Best) in a MIN range not including the first cell entry (as first entry is not a PB) in events where less =PB
=IF(ISBLANK(F6)," ",IF(F6(MAX(V$5:V6)),"PB"," ")) keeps recognising first entry as PB. Any help greatly appreciated
first entry could be anywhere in the column but all entries after will be below it.
View 9 Replies
View Related
Sep 11, 2003
All I believe Juan Pablo posed a quick little diddy on how to have the SUMIF ignore #N/A?? I promised myself I would remember it but here I am asking if anyone remembers it or know how to have Excel add up a column even though the column contains #N/A's.
View 9 Replies
View Related
Oct 27, 2009
I use the following sum array formula in a range of data, but receive a #VALUE!-error, because of some lines with text. Is it possible to ignore text like this by using IF(ISERROR...) or something else, combined with the array-formula below.
View 5 Replies
View Related
Mar 17, 2014
I have a cell with a formula in it. I want to use conditional formatting on this cell if the formula result leaves it blank. Given the formula is in the cell it's never recognised as blank. If an entry is input instead the formula then obviously I don't want the conditional formatting.
What formula can I use in the conditional formatting for it to recognise the Cell formula as blank?
View 6 Replies
View Related
Feb 15, 2009
I have setup a formula with an if statment, so if a cell on another sheet = a certian txt then my sheet A will equal a certian txt, But the problem is i also need to count the cells that contain txt on sheet A, but when i setup a CountA Formula on sheet A it counts the cells with Formula's in then is there a way to only count the result and not include the counting of formula's?
View 9 Replies
View Related
Nov 10, 2011
In cell C1 I hace A1-B1 and in cell DI want to display the status of the cell C1 like this : =IF(C10 ; "NOT OK" ; "OK") This means that when the value of the cell C1 is different then 0 cell D1 will display "NOT OK" and if the value of cell c1 is 0 then D1 will display "OK".
The PROBLEM: Because the cell C1 contains a formula (A1-B1) the D1 cell will display "NOT OK" even if the cell C1 doesn't show any number.
View 7 Replies
View Related
Oct 5, 2013
I'm running a chiropractic office. In order to see where I've been and where I'm going I keep track of things like new patient visits, patient report visits, cash in, insurance in, etc. I keep track of this on a daily basis on one worksheet. The weekly totals are paste-linked into another sheet. It is this sheet that I would like to use to create a dynamic chart however, in using the OFFSET function to create the chart, the formula counts the 'blank' cells b/c of the paste-link from the previous worksheet.
View 1 Replies
View Related
Dec 19, 2006
i m trying to add values in different sheets though some of the values have a #n/A in them and i want to ignore this = SUM(Set1!D9,Set3!D9,Set2!D9). However Set1!D9 is an error and I would like to ignore this value!!
View 2 Replies
View Related
Jan 18, 2014
I have a list of assessment scores for students with a matching grade in text form. I want to show the percentage of students that receive "Adv" and "Pro" grades out of the total number of students (cells with data). But I have extra cells in case students are added during the year. I need to have the formula ignore any empty cells and count all of the "Adv" + "Pro" grades divided by number of students with data. I would like to do this by including the extra cells in the formula so I don't need to amend the formula should students be added. This is the formula so far. Maybe there is a totally better way to write this formula.
=SUM(COUNTIF(C7:C60,"*"&{"Pro","Adv"}&"*"))/COUNTA(C7:C60)
View 3 Replies
View Related
Jan 26, 2014
I want to know how many emails are in my list. There is dash sign where the emal id is not available. The subtotal formula gives me the total entries in range but I want to know only email count numbers.
In my range there are 6 entries and only 4 email ids. Now I'm getting output 6 but I want it 4 ignoring 2 dash signs.
View 10 Replies
View Related
Jul 16, 2009
I want to create a validation list with value comming from formula and I got blanks line. I have to create a dynamic list, I can have 15 possibility and it came from a lookup formula. When I choose the 15 cell with the lookup formula it show the empty cell. I did a exemple of my problem. You can check the attachement to understand my problem in the cell C1.
View 2 Replies
View Related
Sep 26, 2013
I have a table that looks similar to the below. I want to be able to extract the numbers between the brackets and add all up in the last column (as shown in example below).
I have used something like the below however it returns #VALUE in column F because of the empty cells.
(SUMPRODUCT(REPLACE(A1:F5,1,FIND("(",A1:F5),"(")+0))
I need a formula that will be applicable even when there are empty cells and return the results as shown.
A
B
C
D
E
F
Worker (3)
Engineer (23)
Manager (1)
27
Plumber (2)
Designer (20)
22
View 6 Replies
View Related
Dec 2, 2013
I'm using the following formula to look at a range of cells and return the most common text entry. The formula works fine as long as there is text; if there are more blank cells than entries, then it returns a 'blank' and my formula cell is empty. How to clean this up so that it ignores blank cells?
=INDEX(C2:C11,MATCH(MODE(COUNTIF(C2:C11,C3:C11)),COUNTIF(C2:C11,C2:C11),0))
View 1 Replies
View Related
Jun 16, 2014
I have a name which uses the formula
=OFFSET(Query!$F$1,0,0,COUNTA(Query!$F:$F)+1)
That populates a dropdown
However I want to exclude hidden / filtered rows?
Iv'e tried sumtotal etc but didnt get any results. I'm after using the rows as options.
View 1 Replies
View Related
Jun 26, 2007
I have in column D starting D9, I have numbers starting at 1, and may finish at 100. But there could be duplicates, 1,2,3,3,4,5,6,6,7,7,8,9,10,10,11,12,13,.........
I would like to only copy the range D9 to H (End of column D), ignoring all the duplicate numbers, to another sheet.
So on the second sheet, it would be 1,2,3,4,5,6...... with the data copied from E,F,G and H.
View 9 Replies
View Related
Oct 15, 2009
Well following on from my question earlier, I am still playing with my timesheet/rota I'm developing.
I have a start time and an end time, which is formatted as hh:mm then an hours cell which adds them up for you.
BUT if someone is on a rest day or a holiday day or a sick day etc, I would like them to be able to type that in without the cell that adds the hours up going doo laly!!!!! (######)
So, is there anyway they can type say 'R' and then getting the hours total cell to ignore it because it isn't a time?
View 4 Replies
View Related
Jul 22, 2014
I have the following formula which counts number of days between dates in two adjacent cells excluding holidays
=NETWORKDAYS(U311,V311,$AA$4:$AA$14)-1
The $AA$4:$AA$14 refers tote range where the excluded holiday dates are stored.
I have included the -1 at the end as it over counts by one day every time. i.e. if the same date is in both cells it counts 1
However if no date is in both fields it count -1 (minus one)
If a date is just in one field it counts a very high number, example below.
-1
16/07/2014
-29879
20/06/2014
08/07/2014
12
[code].....
is there a better formula to use for this? How do I get the result to show ZERO when both cells are empty? can I get the result to show number of days to present date where there is only a date in first column?
View 3 Replies
View Related
Jun 10, 2013
I have my Excel set up for a default font size of 12 point.
I often download CSV data to insert into spreadsheets. It opens in a new spreadsheet, and it's properly displayed in 12 point size. When i copy and paste it into the ultimate target spreadsheet (which is also set to 12 point size) the pasted data shows up as 10-point and I have to change the font size back to 12-point every time.
Why is this happening and how can I avoid that re-sizing that occurs?
View 3 Replies
View Related
Apr 27, 2014
I have a worksheet (Data) that lists when pupils are in for Nursery sessions during the week. If they are in they have a 3 (hours) by their name in the relevant columns.
In the AM worksheet I now need to pull through a "register" so under each daily heading I need to pull through everyone that has a 3 next to their name under Monday AM / Tuesday AM / Wednesday AM etc. from the Data sheet. However, I don't want it to copy any blank cells. I then need to do the same for the PM sheet.
View 2 Replies
View Related
Jun 11, 2008
How figure out how to drag down a formula that looks like this for the first three cells (C3:C5)?
=(SUMPRODUCT(Polls!D2:D5,Polls!B2:B5))/(SUM(Polls!B2:B5))
=(SUMPRODUCT(Polls!D8:D11,Polls!B8:B11))/(SUM(Polls!B8:B11))
=(SUMPRODUCT(Polls!D14:D17,Polls!B14:B17))/(SUM(Polls!B14:B17))
...etc.
Is there a way to let Excel know that I'm adding six to each cell, rather than it automatically adding one?
View 11 Replies
View Related
Jul 12, 2008
I am using Excel 2002 and trying to do something which should be simple with MATCH.
I have an array of numbers ordered, starting at 0 and incrementing by 0.05 up to 20. I am then using the MATCH function to find the relative position of numbers 0,1,2,3,4 and 5. However, for number 0,1 and 2 the return value is one less than what it should be, for the numbers 3, 4 and 5 it is working as expected. By the way, the match_type I am using is the default 1.
Also I have formatted everything to be numbers and tried various things already, so am beginning to wonder is this is a known issue.
View 9 Replies
View Related
Apr 26, 2007
OK I feel really stupid on this. I must be overlooking something very obvious.
If you look at the attached userform there are some checkboxes where the "check" has a bold appearance, and others where the check is not bold.
If you examine the properties of the checkboxes in VBE, they appear to be identical.
View 8 Replies
View Related
Jun 17, 2008
I have 2 columns to compare which has almost same data but in different formats or sources. I need to update a 3rd columns as 'Yes or No' by checking the checking the data in both the columns. For ex. - Column A has data as - "BIENZ, STEPHEN R"
and Column B has data as - "SALTZER MED GRP/BIENZ". Now as 'BIENZ' is same in both columns so 3rd column should get updated as 'Yes'. There are 3000 rows which needs to be compared in this way.
View 5 Replies
View Related
Dec 8, 2009
I have to pull data from a workbook poasted on a Sharepoint site on a weekly basis. The name of the spreadsheet changes each week, based on the date, and may not be consistent (ie: WBook12_4_9.xls, Wkbook12_04_09.xls, WBOOK12_4_09.xls). My users will have the spreadsheet open, and I'll tell them to ONLY have that one open, but how do I tell my macro to pull from that workbook?
View 10 Replies
View Related
Jul 4, 2014
I have an excel stock price template, where I need the current price to calculate the mid point if the chart.
This is the text I get from the webquery
Underlying stock: SBIN 2699.00 as on Jul 04, 2014 15:30:36 IST
I need a formula to extract the stock price '2699.00' only from this text.
The problems are sometimes its may change to underlying "stock" to "index", SBIN to RELIANCE or TATASTEEL, and the price some times two digit say 16, some times 6 letters say 150.05, or 8 digits say 15160.00
Formula, the text in B1 and need the price at A100.
View 9 Replies
View Related
Jun 28, 2006
Problem:
I'm attempting to consolidate 3 columns of data that is a varying number of rows in length (a range of 0-1000 roughly) for 53 different worksheets (1 per week of the year, named '1' , '2', etc.). All three columns on each page are the same length. What I want to do is consolidate all the data onto one worksheet 3 columns wide and X rows long (so one week's range of data after the other, but it doesn't have to be in any specific order). I am looking mainly for code because that seems to me like the best option at this point unless someone can provide a viable alternative.
What I've tried:
I've tried on a smaller scale, 5 worksheets, naming the ranges using the OFFSET function to create a dynamic range and then trying to paste one right after the other with no luck getting it to paste such a large range. Going along with that I chopped and dropped some code from another online source (forum? tutorial? I don't remember) and modified it to consolidate the 5 named ranges, however, the code does not really seem feasible for 53 named ranges. Loops seem reasonable, but I couldn't come up with an easy way to cycle through the worksheet names and named ranges.
I only have a few hours worth of VBA tinkering so I'm sort of lacking, but I have other coding experience so the structures and concepts are familiar just the syntax and finer points are greek to me. I sadly don't yet have the time to sit and learn VBA either.
If there's an easy way to put a few loops in or you think it should loop through and copy each cell rather messing around with ranges then go for it.
Here's what the code looks like after I modified it: ....
View 5 Replies
View Related
Jul 1, 2008
I have a data set in an Excel spreadsheet entered as one column of data. It is names with addresses, phone numbers, job title, etc. I want to select and transpose each person in the list so when I am done the person's name is in column A, Company name in column B and so on. The problem is the information listed is not the same for each person - so there is a different number of rows for each person. The names are in bold text though, so I need to select from one cell with bold text to the row BEFORE the next row with bold text and transpose the data for each selection. I found this forum by finding an old question here that is similar at Copy based on Bold Paste-transpose provided in that post and it produced no result.
View 4 Replies
View Related
