I want to know how many emails are in my list. There is dash sign where the emal id is not available. The subtotal formula gives me the total entries in range but I want to know only email count numbers.
In my range there are 6 entries and only 4 email ids. Now I'm getting output 6 but I want it 4 ignoring 2 dash signs.
In a formula, what effect does putting a plus sign after an equals sign? e.g.
=+((1+B8)^12)-1. I orginally assumed that it made sure that result the would always be positive but I was wrong.
I’m trying to get my sheet so that at each change in month it creates a sum of the value but I want to sum to show up in the subtotal value column.....
View 10 Replies View Relatedi am trying to isolate everthing after the last dash, now i did the same with the first dash using left, i tried to do the same using Right to get "155", but it gives me incorrect result,
Sheet1 ABC887878-1554-155 87878987878-1554-155 554-155Spreadsheet FormulasCellFormulaC8=LEFT(A8,FIND("-",A8)-1)C9=RIGHT(A9,FIND("-",A9)+1) Excel tables to the web >> Excel Jeanie HTML 4
I need a formula that will extract only the text between the 1st and 2nd dash in a cell. Example:
10466193-1909457-
10648145-3026718-t526363536m
This formula would return only the following:
1909457
3026718
I need a formula that reads If a number is less than zero then it will show as positive, but if the number is greater than zero then it will show as a negative.
View 6 Replies View Relatedi want formula in b1 to get the formula in a1 without Equal Sign
A1=(A2*A3)+2
Reults B1 should be (A2*A3)+2
I'm trying to solve a strange problem in a piece of code.
I have a variable that is define as Double called STD. When i try to insert that variable in a formula the decimal sign (for me a comma "," because I'm Portuguese) gets converted to ";" (which is for me the separation sign for the expressions in excel formulas. ex: AND(A1>0;B1>0)=TRUE). The code is:
My boss uses the + symbol and the = symbol in his formulas eg "=+E3*E4" What is the advantage or difference in this as to just using "=E3*E4"
View 3 Replies View RelatedI have attached here an excel sheet with some data. I need to show the minus value in D5 as a plus sign, is there any conditional formula to work this out??
View 4 Replies View RelatedI am looking for a formula to do the following:
In Tab 1, I have a negative number and the word "Original" next to it. In Tab 2, I have a mix of positive & negative numbers. I want all numbers that are negative to display the word "original" and all positive to display" new." How do I do that? Also, I want the opposite to work as well-- if Tab 1 has a positive number, I want all positive numbers in Tab 2 to display "original."
i have lets say a table with rows that contain the following data.
SKU - PRICE - SALEPRICE - DESCRIPTION - SALEDESCRIPTION
What I am trying to do, is to make a concat formula that says:
SALEDESCRIPTION = DESCRIPTION+price was+PRICE+now+SALEPRICE
In essence so that i can simply pull down the formula, and all our product descriptions have 'special offer, was xx (price) is now xx (sale price).
This works fine, except that in the SALEDESCRIPTION, the amounts from the price and saleprice fields are being brought over without decimal places and without currency symbol.
I have tried formatting those two columns as currency or accounting but neither works.
way to do this but i have a sheet that is into 5 - 6 thous rows, in one of the columns (names) i sort it by names and then order it by subtotal for certain values.
What i need to know, is there anyway i can take just the subtotal values out and put onto another spreadsheet without copying and pasting it all as there are lots of subtotals and this would help alot as the other info is not nec. just the subtotal'd info. either that or is there anyway i can highlight the subtotal'd row info in yellow/bold text anything like that that would make it stand out without having to do it manually?
I am desperately trying to add a simple subtotal formula but receive the same error ("Type mismatch"):
View 4 Replies View RelatedThe following is what I have in A1:C3.
4 TRUE 0
4 FALSE 4
4 FALSE 4
The Formula in C1 is =IF(B1=TRUE,SUBTOTAL(9,C2:C3),A1)
This formula is then copied down to C2 and C3. I want this formula to subtotal the next two numbers if the cell to the left is true. Right now it is giving me 0, but it should be giving me 8.
I'd like to point a cell to a subtotal on another sheet but that sheet will periodically have the subtotals removed, more data added, then sorted and subtotalled again. Is there a way to have my other cell find the subtotal that matches a certain criterion (in this case, cost center)?
View 9 Replies View RelatedLet's say I have a set of values (A1:A10) where each contains a number, with a varied amount of decimal places (some may have 0, some may have 10)...how can I make a formula in cell B1 that averages A1:A10, ignoring the decimal places (rounding to the nearest whole number)
For example, if this was A1:A10
93.11
94
92.12321
95.1
96.7
98.1
99
100.03
88.6677
85.6675
If I did the Average (=AVG(A1:A10)), I would get 94.2498. But I don't want this, I want the formula to take into account the numbers rounded to the nearest whole number, meaning, I want to take the average of..
93
94
92
95
97
98
99
100
89
86
Which would give me a value of 94.3.. In this example, there isn't much of a difference, but I was simplifying the numbers for time sake
Working on athletics worksheet. Have worked out a formula to attribute a PB (Personal Best) in a MIN range not including the first cell entry (as first entry is not a PB) in events where less =PB
=IF(ISBLANK(F6)," ",IF(F6(MAX(V$5:V6)),"PB"," ")) keeps recognising first entry as PB. Any help greatly appreciated
first entry could be anywhere in the column but all entries after will be below it.
All I believe Juan Pablo posed a quick little diddy on how to have the SUMIF ignore #N/A?? I promised myself I would remember it but here I am asking if anyone remembers it or know how to have Excel add up a column even though the column contains #N/A's.
View 9 Replies View RelatedI want to stop those little green error checking markers in the top corner of cells from appearing in my spreadsheet. My formula is correct however the error markers appear in 40(ish) cells and make it look very untidy. I know there is the option of turning background error checking off, however isn't appealing to me as I have other worksheets where I want to check for errors. Also, my report is used by 20 people so I can't change the options which might affect other reports they may have.
What I'd like to do is either turn off the option for one specific worksheet, or add a few lines of code which sets the cell properties to ignore the error for each of the cells affected. I've tried to use macro recorder to work out how to ignore a cell but it doesn't record anything for this action. Is anyone aware of the correct piece of code to carry out this action?
Just to give you a quick overview (i cannot attach workbook due to data protection for our customer), I have a workbook with two tabs on it, an invoice summary tab and a rentals tab.
This is an extract of the table from my invoice summary tab:
Tab
Net (Zero Vat)
Net (Standard Vat)
Initial Rentals
Rentals
0
[Code] .....
The invoice data is on the rentals tab. Column "C" on the rentals tab details what type of rental it is, as per column A in the table above. the amount to sum on my rentals tab is in column "S".
I have a formula currently which looks like this:
=SUMIF(Rentals!$C:$C,'Invoice Summary'!$A2,Rentals!S:S)
this works fine.
Now the problem i have is i have an autofilter on the rentals tab which will be filtered by different accounts, I need the formula on the invoice summary tab to only show the visible amounts (as per the filter) and not the whole column. I was thinking of a subtotal formula but can't use a sumif and subtotal together (i dont think).
I am trying to combine a subtotal formula in sumproduct formula but end in error. Appreciate if someone can assist me with the right formula. I would like to combine subtotal in the following sumproduct formula:
=SUMPRODUCT(((C3:C9)=C14)*((G3:G9)=B15)*(H3:H9))
I use the following sum array formula in a range of data, but receive a #VALUE!-error, because of some lines with text. Is it possible to ignore text like this by using IF(ISERROR...) or something else, combined with the array-formula below.
View 5 Replies View RelatedI have a cell with a formula in it. I want to use conditional formatting on this cell if the formula result leaves it blank. Given the formula is in the cell it's never recognised as blank. If an entry is input instead the formula then obviously I don't want the conditional formatting.
What formula can I use in the conditional formatting for it to recognise the Cell formula as blank?
I have setup a formula with an if statment, so if a cell on another sheet = a certian txt then my sheet A will equal a certian txt, But the problem is i also need to count the cells that contain txt on sheet A, but when i setup a CountA Formula on sheet A it counts the cells with Formula's in then is there a way to only count the result and not include the counting of formula's?
View 9 Replies View Related In cell C1 I hace A1-B1 and in cell DI want to display the status of the cell C1 like this : =IF(C10 ; "NOT OK" ; "OK") This means that when the value of the cell C1 is different then 0 cell D1 will display "NOT OK" and if the value of cell c1 is 0 then D1 will display "OK".
The PROBLEM: Because the cell C1 contains a formula (A1-B1) the D1 cell will display "NOT OK" even if the cell C1 doesn't show any number.
I'm running a chiropractic office. In order to see where I've been and where I'm going I keep track of things like new patient visits, patient report visits, cash in, insurance in, etc. I keep track of this on a daily basis on one worksheet. The weekly totals are paste-linked into another sheet. It is this sheet that I would like to use to create a dynamic chart however, in using the OFFSET function to create the chart, the formula counts the 'blank' cells b/c of the paste-link from the previous worksheet.
View 1 Replies View Relatedi m trying to add values in different sheets though some of the values have a #n/A in them and i want to ignore this = SUM(Set1!D9,Set3!D9,Set2!D9). However Set1!D9 is an error and I would like to ignore this value!!
View 2 Replies View RelatedI'm looking for a formula that acts the same way as the subtotal formula (revises if rows are hidden and only adds visible rows). Is there anyway to get this removal of hidden rows but for subtraction?
View 3 Replies View RelatedI have a data set of students results and I have been using countif to pickup similar grades eg, C1, C2 and C3 all as C. However I need to subtotal filter against teachers and the sumproduct won't let me use C* as a wildcard to pick up the three types of C. How I can subtoal countif multiple criteria.
View 3 Replies View Related