I have a long row of text cells in a range. Starting with the 1st cell I want to insert 3 empty to the right, then repeat for the next cell that had originally butted up against the first cell until 3 cells have been inserted for each cell in the range.
View 2 RepliesI have a sheet with a range of paragraphs of text from cell D2:R2.
How can I get it so that if I put an X in the column under the relevant paragraph, it will insert the paragraph of text into the spreadsheet.
For example. Text lies in cell D2. If I put an X in cell D7, I want the text in D2 to be inserted into C7.
Excel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
View 2 Replies View RelatedIs it possible to take text from 2 different cell and inserting into one cell?
For example:
Cell A1 reads 'John' and cell A2 reads 'Smith' can I make cell A3 read 'John Smith' by taking those two bits of information?
I'd like help writing a single formula that assigns either a numerical 1 or 0 to a cell based on values from two other cells.
By way of background, I'm working with three columns. Cells in column F contains values from 1 to 4. Cells in column G contain values from 5 to 11. Cells in column H are currently blank.
I need a single formula that will insert either a numerical 1 or a 0 into column H according to the following conditions.If F3 = 1 and G3 = 5 or 6 or 7 then let H3=1 otherwise let H3=0
If F3 = 2 and G3 = 7 or 8 or 9 then let H3=1 otherwise let H3=0
If F3 = 3 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0
If F3 = 4 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0
I have a range (of 2 rows) that are set up as a header row and sub row. I want a macro to insert these above the active row (ie. where the user places the cursor), but when I select and copy the range in the macro, I don't know how to refer back to the 'active row' because that's not active anymore.
I'd also like the cursor then to be placed into one of the cells in the new row, ready for the user to start editing.
Suppose that i have a table that displays different metrics for each month of the year. I'm dealing with waste management at a thrift store so I'm looking at the weight of donations salvaged, weight of donations sent to landfill and weight sold and so forth. It would look something like this..
weight sent to landfill
weight sold
january
500
450
february
350
390
march
400
789
In my dashboard I'd like to be able to sum the total weight salvaged for certain months like Jan-Feb or Jan-March.
I've named the ranges such as "weightsalvaged.Jan_Feb". So for the sum of the weight salvaged, I have the formula =sum(weightsalvaged.Jan_Feb)
I would like to have another cell where I write "Mar" and the name of the range in the formula automatically changes from
=sum(weightsalvaged.Jan_Feb) TO =sum(weightsalvaged.Jan_Mar)
I have a macro recorded that inserts into column E in the attached report, and then retrieves data from another worksheet in the workbook. In column D I am trying to keep a 6 month average which includes the latest inserted data, however every time I insert a column the relationship with column D is moved out by one. e.g. range E8:J8 becomes F8:K8.
I am also stuck with setting up a macro to import a new model into the report. I have set up a worksheet called new model with the manufacturer, model and fail descriptions, however all macros I have recorded fail when trying to insert the manufacturer and model into mulitple cells.
I would like to insert a formula in a column, the formula is in column D and must be something like "=C1-B1" for row 1, "=C2-B2" for row 2,...etc. I would like to do it without using a loop cycle in VBA...I have attached an example of the data I'm using..
View 3 Replies View RelatedI have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
I am having trouble looping through a range and inserting a formula where a condition is met.
My range is "h9:i"
My current code inserts a formula in column i when there is a value in the adjacent row in column h:
[Code] .....
However, because there are so many rows (12,000+) it is taking a considerable length of time to run.
Some of the cells in column i will already contain the relevant formula, so to speed this up I want to insert the formula in column i only when the cell value (in column i) is not null, as opposed to inserting it for all cells within the range.
I know how to loop through the range, but the problem is the 'H9' cell reference in the formula in the code above will need to change depending on what row it is being inserted into- so if it is going into "i31" this will need to be "h31".
Right now, the code below is inserting an entire row when it pastes the values in I only want the values to be inserted in Range (A:AJ).
View 5 Replies View RelatedI am instantiating Excel 2003 from vb.net and populating the spreadsheet from SQL. The workbook itself will be maintained even when the .Net program is inactive (so that the column headers are established and saved.) Is it possible to prevent the users from inserting columns within a certain range?
View 2 Replies View RelatedThe delete function has disappeared from my EDIT menu in excel. Delete and Insert has also disappeared when I right Click on the spreadsheet.
I have recently purchased a new GPS for my fishing boat. I am trying to transfer my old coordinates from one unit to the other. I am using a .csv file to achieve this. Can some kind please let me know (and possibly tell me) if there is way to insert characters and spaces in to multiple cells. I have over 800 individual coordinates to modify to the new gps and this would take a long time to achieve individually.
I need to replace this: 12.34.567 to this: 12 34.567 N
and this: -1.23456 to this: 001 23.456 W
I have a spreadsheet that has formulas in cells C3 to C10 (cells C3 to C10 have =(sheetc), (cells C3 to C10) formulas. I want to be able to add a row somewhere in between those cells and have the that new row take on the same cell formula as the others...resulting in cells C3 to C11 now having formulas..
View 1 Replies View Relatedi want to know how to prefix a minus sign (-) before numbers in cells in a large range.i m working on a large sheet containing the Numbers with Cr and Dr as suffixes just like 445Dr ... 3331Cr and so..on... in the worksheet
i want to know the method of deleting the suffixes and prefixing - sign infront of numbers having Cr as the suffix.
Numbers with Dr as suffix denote positive numbers
and numbers with Cr suffix denote negative numbers. i want to prefix the -minus sign in front of numbers having Cr in the end.
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
task of inserting a block of cells into a worksheet.
I have saved 4 different blocks of cells and depending on an option chosen from a drop down menu i want to select one of more of these sets of data and paste them into a worksheet.
I'm using IF functions to get the difference of two cells. An example:
View 5 Replies View RelatedThis problem just appeared recently, as if out of the blue, and it seems to affect all of my old work sheets as well as new ones. I am using 2002 version. When I input any number in any cell the program automatically inserts a decimal point. Thus 1 becomes .1, 12 becomes 1.2, 123 becomes 12.3 etc. I have tried formatting the cells to "general" and to to "number" with no change. The thing that really gets me is that old saved worksheets exhibit this behavior as well. I can work around the problem by inputting 1. or 12. which then gives me the entry I am after but I've never needed to do this before.
View 2 Replies View RelatedI have a spreadsheet that has 5 columns, with the headers:
Code
Description
Colour
Size
Price
There are over 500 lines on this spreadsheet.
The Blue headers have all the information filled in, whereas the Red headers do not.
I have a second tab on that spreadsheet with the below information filled in.
Code
Description
Colour
Size
Price
Now my problem is that I need to merge the 2 tabs into 1...however....
The codes on tabs are not in the same order, and on the first tab, they are interspersed with merged rows with the category name, whereas the second tab they are just a full list.
My current issue is that I need to enter a $ into multiple formulas before cell numbers without having to do it manually, is there a way to do this? I cannot drag the cell across with the $ already entered as this will change the cell reference in an adjacent cell.
If this is not clear, what my scenario is that I have a 250 x 2500 cell table. Going across the x axis the formula is: J2-AVERAGE(J$2:J$11) then the next cell K2-AVERAGE(K$2:K$11) and so on. I now want a $ to appear before J and K without having to manually insert $ into every formula, so that I can drag the columns down varying the column number.
Suppose I have done a spreadsheet of,say 100 entries in alphabetical order in a column and I discover that I have missed 6. Is it possible to move the existing part from where I missed below this to make room for more entries without losing any of the entries?
View 3 Replies View RelatedI have two sections to this spreadsheet: 1) the entity section; 2) the order section.
I have created a macro to insert rows in both these sections. The macro appears to work fine for the first section but not for the second section. The problem I cannot solve is in respect of cells D9:D10. The macro is as follows:
I want to add (same) text to the end of a whole bunch of cells. What would be the formula or function in Excel 2007 for this? I want to add ":59" to the end of each of these:
manages
blankdisk
dentist4u
desktopsupportservices
oznc
5st
divinehope
kcdm
pokeroyunlari
hdgallery
This may sound trivial, but how do you insert a column to the right of the current selection?
If I do Selection.EntireColumn.Insert that inserts a column to the left. Anyone know how to do this?
I have a workfile, containing dates in column C and values in column G.
The data is imported. In most instances there are no dates in line with the second value. I need VBA code that will insert a the same date in line with the first value below the cell where there is a date....
How do I insert pictures into Excel's cells, so as to get a mosaic of say 2x3 pics?
Trying to just drag a pic onto a cell does not make the pic sticks. I need the pics to behave like in frames in HTML, including moving, resizing etc. Same for video clips that I want running within the cells.
I receive a report that is generated by another program. One column contains the address, city, state, and zip (5 and 10 digit) with no coma separators. Macro that would add comas before the Zip, state, and city so that I can use the text to columns tool in excel.
here is an example of the column
7935 COUNCIL PL SUITE 200 MATTHEWS NC 28105
223 WRENWOOD LN CHARLOTTE NC 28211
1125 BIRCH ST APT A ROGERS CITY MI 49779-1406
PO BOX 1376 NEW YORK NY 10018
428 C ST APT 301 SAN DIEGO CA 92101
4682 MISSION BV SAN DIEGO CA 92109
I need it to look like this:
7935 COUNCIL PL SUITE 200 ,MATTHEWS ,NC ,28105
223 WRENWOOD LN ,CHARLOTTE ,NC ,28211
1125 BIRCH ST APT A ,ROGERS CITY ,MI ,49779-1406
PO BOX 1376 ,NEW YORK ,NY ,10018
428 C ST APT 301 ,SAN DIEGO ,CA ,92101
4682 MISSION BV ,SAN DIEGO ,CA ,92109
Then I can run the text to columns and it will split the text into 4 columns.