Using The =ISNA(MATCH Formula
Jan 26, 2009
I have 2 spreadsheets. Both have a list of part numbers on. Beside each part number i want a formula that tells me if the part number is present in both spreadsheets so its says TRUE. If its not present then FALSE. I've tried using this command but it doesn't seem to work properly =ISNA(MATCH(B2,A:A,TRUE))
I've attached the 2 spreadsheets. Spreadsheet1 is where i need the forumula placed beside the part numbers so if its present in Spreadsheet2 as well it displays TRUE beside the part number in Spreadsheet1.
View 4 Replies
ADVERTISEMENT
Apr 2, 2009
I have configured conditional formatting to check valid entries in a dependant list. I used the solution provided by SHG at:
http://www.excelforum.com/excel-prog...ant-lists.html
Now I need to use a macro to activate and deactivate the conditional formatting due to performance issues.
When the formula for data validation includes the indirect funtion I got a compile error and the macro won't run.
View 3 Replies
View Related
Feb 15, 2010
Am trying to figure out the best way to combine into 1 cell an ISNA(Match... and a Lookup array that will run if the ISNA(match ... returns a false value.
Right now it's running in 2 separate cells ISNA(Match ... and then an if statement that if the ISNA(Match returns false, that the look-up runs, if it doesn't return false, then the value is 0)
View 9 Replies
View Related
Oct 28, 2008
=IF(ISBLANK(VLOOKUP(1,'D-Sort-R'!A96:$N$450,4,0)),"",VLOOKUP(1,'D-Sort-R'!A96:$N$450,4,0))
I've almost got what I need for a mind bending series of sorts that go from worksheet to worksheet. I need to add ISNA along with the ISBLANK above.
View 9 Replies
View Related
Mar 5, 2014
How to combine ISNA and ISBLANK in the below formula such that it returns empty cell if vlookup cell is blank.
HTML Code:
=IF(ISBLANK(VLOOKUP(B4,'C:UsersArulDesktop[Common Spares 1.xlsx]Sheet1'!$B$1:$L$77,2,0)),"",VLOOKUP(B4,'C:UsersArulDesktop[Common Spares 1.xlsx]Sheet1'!$B$1:$L$77,2,0))
View 5 Replies
View Related
Nov 6, 2012
I'm trying to use this formula but I get the error "too many arguments". How can I do the same as the formula without an error:
=IF(ISNA(VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE)),VLOOKUP(B12,GYROLOKBR!A12:E2000,3,FALSE), VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE),VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE))
I added in the VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE) - when I used it without that it worked. But I have 3 sheets I need the the VLOOKUP to look over and this formula that I copied off another thread only had 2 tabs.
View 2 Replies
View Related
Sep 27, 2009
What i want to do is to look up of the value of home and away games seperatly. if there is no match for the lookup i get the "N/A" and if there is no value i get "0". If i get 0 the formula will calculate as a lost game.
View 10 Replies
View Related
May 21, 2013
I have been using an IF,ISNA,VLOOKUP formula as follows which I am sure you are all familiar with :
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),"",VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
This formula works correctly, displaying the lookup value for K7. My query is between the"" I can place text to display when K7 is blank and this works correctly too. However I would like to place a formula in here. The formula is VLOOKUP(I7,Orig!A7:B35,COLUMNS(B7:B35)+1,0 i.e. the lookup value is now I7 and not K7 when K7 is blank.
I have tried the following and variations based on what I know but they return errors.
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),(""& VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0),VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
Any better way of using I7 as the lookup value when K7 is blank.
View 7 Replies
View Related
Jul 17, 2009
I use the following formula. It works except it returns "0" if the field is blank. What alternate formula can I use that will return blank instead of zero if the field is blank?
=IF(B3="","",IF(ISNA(VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)),IF(ISNA(VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),"",VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)))
View 9 Replies
View Related
May 10, 2006
I realize there are a number of threads on this topic, and I've read through them but have been unable to apply those answers to this problem. I've attached a sample of the worksheet in question. The worksheet is supposed to tell me if messages are supported via a certain Network (BFX).
Column A is the result of a VLOOKUP function, which returns Yes or No if the entry is found, or #N/A if the entry is not found. Column B is my attempt to translate column A into strictly "Yes" and "No", converting an #N/A into a "No". For some reason, the ISNA( function I'm using doesn't seem to work, as highlighted in row 18.
View 2 Replies
View Related
Nov 4, 2008
It then places all the data on a new sheet. My problem is that some of the formula that the macro places on the new sheet come back with the result #N/A - which is fine, as they are the result of a lookup.
What I want to try and do, is at the end of the macro, get it to delete the row if the activecell is showing as #N/A
I've tried to write a small bit of code for it...
View 10 Replies
View Related
Oct 20, 2008
I'm trying to get data from another tab, but only if it is greater than or less than a certain number. Here's what I'm using but doesn't seem to work.
=IF(ISNA(VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE)),">=22.00%",VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE))
A13 is targeting the name of the person
Aim MTD is the sheet tab the info is in
And I want to select the information only if the cell value is 22% or greater. If the cell value is less than 22%, I don't want it to read or to read zero. I'm not an excel expert (yet), but hope to be one day!
View 5 Replies
View Related
Dec 21, 2006
Let me first explain what I tried to do, before getting to the mess I created. Maybe I should use another formula?
I wanted to compare the amounts in two files on the basis of the same product number. Thus search for a sheet and a column in another file for the same value of A6 (current file) and show the value of the same row in another column (of the other file). However, if there is no value I wanted it to display zero (0) or a text such as "False".
First I did a basic LOOKUP which should work?. However it still showed #N/A for cells without a reference value (A6 is THA) or target cells without a target value (€100.00). I tried to avoid this by combining the ISNA function. However, although the last value shown is correct, the ones before change and seem to add up, or refer to another cell?
Another issue I did not come to yet is the fact that I would like it to search for the correct sheet based on the first three letters of the reference (A6), preferably not case sensitive. A6 is Tha13, first three letters indicate sheet name Tha. Any suggestions on this? ...
View 9 Replies
View Related
Aug 23, 2008
I have the following vlookup working exactly as I want it to in excel: =IF(ISNA(VLOOKUP(LEFT(C2,10)& "*", NAME,2,FALSE)),"",(VLOOKUP(LEFT(C2,10)& "*",NAME,2,FALSE))) -NAME is a defined section on another worksheet
The problem I have is when I come to use this within a vba macro I'm writing the wildcard section automatically gets spaces added so it goes from "*" to " * " and excel doesn't like it! The code I'm using to write it into the cell is simply:
ActiveCell.FormulaR1C1 = _
"=IF(ISNA(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)),"",(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)))"
how to stop the spaces being added?
View 2 Replies
View Related
Jan 21, 2014
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
View 3 Replies
View Related
Feb 5, 2014
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
View 4 Replies
View Related
Oct 6, 2009
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies
View Related
Nov 6, 2008
Basically i have one workbook, within which are 2 worksheets.
I'm having to describe it without a template (as aforementioned the site is having a problem at the moment).
In cell H18 of worksheet 1 I HAVE .........''Fixed asset posting FADep007441'' in cell J18 SAME worksheet i have the amount 26.62
I need to match the full column H (Worksheet 1 and values in column J) TO
those in column B4 OF WORKSHEET 2 AND MATCHING this to the EXACT VALUE in E4) .....BUT ANSWER TO BE looked up in (cell N18 of worksheet 1) and if exact the same value and if not the word '' NO''.
View 3 Replies
View Related
Jun 18, 2009
Current I am using two spreadsheets for similar press and am combining the two. What I need help with this time is currently in cell c9 the formula is =ROUNDDOWN(17.7/C7,0) or =ROUNDDOWN(39.3/C7,0) depending on which press I am using. The presses are shown in cells d34 - q34. Indigo =17.7 gilboa = 39.3. I have added these numbers to a table in the scales tab a24:e26. Is there a way to write a formula in cell c9 on the input tab to combine the 2 above formulas and insert the correct 17.7 or 39.3 when required?
View 14 Replies
View Related
Aug 20, 2009
to creating formulas in Excel!
Basically, all I want is for a formula to tell me if I have matching data in two separate cells. What I have is data entered in cell A1. What I would like is one single formula to check if the same entry has been entered in cells A2:A10 and if so, return a 1, and if not return 0.
View 9 Replies
View Related
Aug 28, 2009
I need column F to be matched to column E, i want to see how many user id's from column F are in column E and for them to be highlighted in column E. note that the user id's might reflect more than once in column E. See attached..
View 5 Replies
View Related
Oct 15, 2009
Guys im stuck on the fact of how to pull the correct information through for a named person.as from the example if i place say steve in the named box i would like all of steves scores to appear in the designated boxes.and so on.
View 11 Replies
View Related
Jan 29, 2007
I want to match let's say "Elbow" with "Yes" so that when I select the word "Elbow" from a list the word "No" appears on another cell. There are 54 words to match. This is what I'm currently using, however, I could only get to 29 items and I need to match 54.
=CHOOSE(MATCH($J$2:$J$100,{"Abdomen","Acetabulum","Acromioclavicular Joint","Ankle","Arm","Back","Carpus","Cervical","Chest","Clavicle","Coccyx","Elbow Joint","Femur Bone","Fibula","Fingers","Foot","Forearm","Glenohumeral Joints","Hand","Head","Hip","Humerus","Ilium","Ischium"," Joint","Leg","Lower Leg","Lumbar","Metacarpus","Metatarsus","Neck","Patella","Pelvis","Pubis","Radius","Ribs","Sacrum"," Scapula","Shoulder","Spine","Spine - Lumbosacral","Spine - Thoracic","Spine - Thoracolumbar","Sternoclavicular Joints","Sternum","Tarsus","Thigh","Thoracic/Dorsal","Tibia","Toes","Ulna","Upper Leg","Upper Arm","Wrist Joint"},0),"No","No","Yes","Yes","Yes","No","Yes","No","No","Yes","No","Yes","Yes","Yes","Yes","Yes" ,"Yes","Yes","Yes","No","Yes","Yes","No","No","Yes","Yes","Yes","No","Yes")
View 10 Replies
View Related
Mar 11, 2009
I want this formula to return zero if it cannot match the value. Right now it is returning #N/A and i don't want that. I just want to return "0" if it can't match it.
View 4 Replies
View Related
Mar 26, 2009
I am trying to match three items. I have attached an example of what I'm looking for since trying to explain it here would be confusing at best.
View 2 Replies
View Related
May 21, 2014
So Column A has First name, Column B has Surname Column C is empty Column D has list of firstnames, Column E has list of Surnames, Column F has User ID
I want to Look at the Surname in Cell B2 see if I can find a match down Column E, if I do I want to look at the First name next to it in Column D see if that matches Cell A2 and if both match put the User Id in Column F into cell C2
View 3 Replies
View Related
Nov 22, 2007
Need to place an Index(Match) formula in Sheet 2 B2 (as for example). The lookup values in Sheet 2 to be matched with Sheet 1 will be A2, B1 and J1.
In Sheet 1 (Edit) I'm only interest in the subtotal and Sheet 2 J1 represents the subtotal for the week that ends with J1 date.
The Index should be the whole Sheet 1 (if possible) for further expansion (and I do have way more than what is presented below).
Edit
HTML removed by RAM and replaced with a new HTML further down.
View 9 Replies
View Related
Nov 18, 2008
In Cell AA8, I need a formula that will read the 3-digit number in Col Z8 and count the number of rows where a match is found. The 3-digit number can be in any form, Ex Cell Z8,
972 can be 729,279.
************************************************************************>Microsoft Excel - Tic-Tac-Toe -1 +1.xlsx___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutZ8Z9Z10Z11Z12Z13Z14Z15Z16=VWXYZAA811/18/089729727911/17/0843143141011/16/0836036041111/15/0870670611211/14/08067067 1311/13/08143143 1411/12/08603603 1511/11/08729729 1611/10/08534534 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 9 Replies
View Related
Jan 21, 2009
I have the following array formula that identifies the first number in the column I:
=INDEX(I1:I1200,MATCH(TRUE,ISNUMBER(I1:I1200),0))
This formula works fine however I was hoping to expand the range to the entire column. I thought (obviously incorrectly) that the following formula would work:
=INDEX(I:I,MATCH(TRUE,ISNUMBER(I:I),0))
Instead of getting the same result as the first formula, I am getting "#N/A".
View 9 Replies
View Related
Jul 2, 2009
I am using an offset match formula to look at a named range of data and create a validation list of property address's based on certain criteria in cell d1.
My question is it appears the information which is status information seems to have to be sorted, otherwise the list doesnt work properly.
is there another formula to accomplish this with out having to sort the criteria in cell d1 ??
This is the formula i am curently using, it works great if "ListStatus" is sorted and not if unsorted.
=OFFSET(AddressDisplay,MATCH($D$2,ListStatus,0)-1,0,COUNTIF(ListStatus,$D$2))
View 9 Replies
View Related
