Isolating Text And Number Strings
Nov 14, 2013
I have an address column in which multiple strings of text and numbers have been combined. I need to isolate each string and place it into its own column.
Column looks like this....
ADDRESS
615 NE CORDER AVE, LEES SUMMIT, MO 64063
2661 NW LEES SUMMIT RD, LEES SUMMIT, MO 64064
104 SE 4TH ST, LEES SUMMIT, MO 64063
4944 SW GULL POINT DR, LEES SUMMIT, MO 64082
3904 SW PRYOR RD, LEES SUMMIT, MO 64082
329 NW BRADFORD ST, LEES SUMMIT, MO 64064
They need too look something like this...
No.
Suffix
Street
Type
City
State
Zip
615 NE Corder Ave Lees Summit MO 64083
The problem I'm having when trying to use a "left" or "right" formulas is some of the strings have different positions in the whole string itself (does that make sense?) (some addresses have 4 characters, some have 3, so on....)
View 3 Replies
ADVERTISEMENT
Oct 29, 2012
I have the following examples of text in column A
Race 1 - NORTHAM FEED & HIRE MAIDEN STAKE (SKY2)
Race 12 - NORTHAM MAIDEN STAKE (SKY2)
I want to isolate the race numbers so thy are in column P as follows
1
12
View 8 Replies
View Related
Jan 15, 2014
I want to isolate text on either side of dashes ( " - " ) that occur either 2 or 3 times in a single cell.
Example:
Apples - Pears - 99 - 100+ years
Bananas - 56 - 57+ years
In particular, I would like to capture the "99 - 100+ years" and "56 - 57+ years" text on its own.
I tried this " =SUBSTITUTE(A1, "*- ", "", 1) but it doesn't work
View 5 Replies
View Related
Mar 22, 2006
In column A and B I have text representing an Entity and its Intercompany,
respectively. In column C I have concatenated the two. So now in Column C,
for example, I have "BillTom" in row 1 and "TomBill" in row 900.
I need Excel to convert the text into some sort of code, ASCII or number
that shows they are EQUAL. I need something that shows "TomBill" and
"BillTom" are the same thing, just in a different order.
I cannot build an IF formula or use Find/Replace, as I will have thousands
of these types of combinations.
View 14 Replies
View Related
Oct 3, 2007
I have a list of around 50000 names. I need to count how many are unique.
View 9 Replies
View Related
Jun 11, 2014
In Column A I have the list of strings that I need to search. I want to count the number of occurrences of these strings inside these two text files: Sample1.txt and Sample2.txt. For example I have the string "DOG". I want to search and count the number of times this string appeared in Sample1.txt, and Sample2.txt
See below:
View 5 Replies
View Related
Jul 29, 2013
I have been trying to format the rows on this sheet to color scale red based on the number of repeat text strings in Column E. Referring to the attached example sheet, '321/312.2/321.3' appears the most times and the goal is to color code the rows it appears in the deepest shade of red, then the next highest occurring string would shade the rows it appears in a lighter shade, etc, in descending order. Our team currently does this across multiple sheets manually everyday and it would be a real time saver if we could get excel to do this automatically.
View 14 Replies
View Related
Dec 7, 2011
How would I go about counting the number of times TA shows within strings of text in a range within a sheet. Example: TA,MH in cell A2, CB,TA in cell C40, ES,TA in cell Q19. Result would be 3. Ideally, I'd like the formula to reference a cell that has TA as the look up data such as in A1 I'd have TA.
View 4 Replies
View Related
Dec 17, 2011
Is it possible to do the following with a formula in Excel...
I have a list of users with the dates they first logged into a system and the date they last logged in. I'm trying to group them together into segments so I can analyse them using a Pivot table and chart to see how often different groups are using the system, e.g. New customers in December, November, October, etc.
The trouble I am having is trying to convert the different human-readable text strings into a consistent number of weeks from today's date, e.g.
USER FIRST LOGGED IN LAST LOGGED IN
user 1 2 years 20 weeks 54 sec ago
user 2 44 min 7 sec 1 min 37 sec ago
user 3 49 weeks 2 days 17 min 3 sec ago
user 4 5 weeks 2 days 33 min 32 sec ago
user 5 38 min 9 sec 38 min 9 sec ago
user 6 5 weeks 3 days 1 hour 7 min ago
user 7 2 hours 17 min 2 hours 11 min ago
user 8 45 seconds ago 45 seconds ago
Is there a formula I can use to convert these human readble text strings into a number of weeks elapsed since today's date?
View 9 Replies
View Related
Feb 28, 2013
how to Chk the text string in particular cell, compare it with a super set column and get the full from of the text string from another corresponsing column and the output will be corresponsing full form of the chked text string?
View 6 Replies
View Related
Mar 8, 2013
How do I use an Excel formula to find which (if any) multiple sets, each of up to 50 words, exist in a series of rows of a spreadsheet - if set A has one or more words found in a searched cell.
A positive result will return a specific value in the designated result cell. If none of the words in Set A is found in the searched cell, the formulae will repeat the test for the words in Set B, and so on.
After all 50 sets of words have been tested, the formula will move to the next cell in the searched column.
New words will be added to the sets of words continually as required.
Multiple words within sets are included in double quotes. Within each set of words there will be some n-tuples of words (i.e. 24 adjacent words) that contain one or more of the words in the set, but for which the formula will be required to return a negative result. Example: Set A = word 1, word2, word 3, "word1 word2 word3". (The words within a set could also be each entered in separate columns, as opposed to all included in a single cell.) The single column of text to be searched is about 10,000 rows.
I am wanting to use the above in a spreadsheet that contains data downloaded from a series of bank accounts to automatically allocate items of expenditure to one of 20 or so different categories of expenditure.
The formula will search the description field to find words that are used in the in the downloaded files from the various accounts to describe each transaction.
If a word describing travel expenditure (e.g. hotel, "holiday inn" but not "holiday travel") is found in the description of an expenditure item - the item cost will be allocated to the TRAVEL EXPENDITURE column, which is one of 20 or so different categories of expenditure.
Happy to consider a different solution if the task can be done better a different way.
Tried using a combination of INDEX/SEARCH/IF in Excel, but was not able to get a correct result. PS I am using Excel 2011 for Mac - which does not allow macros, so the solution needs to be entirely formula based.
View 1 Replies
View Related
Sep 27, 2006
I try to write the function that gets some "ref" and returns appropriate item.
For example: if I give to function "C3", it returns "AAA"
if I give to function "R18", it returns "BBB" (cause it between R15 to R26)
if I give to function "R9", it returns "BBB" also.
View 9 Replies
View Related
Sep 4, 2009
An original text string entry appearing in an Excel cell would be:
"N7C Neuroprotective J5Z Antiviral, other M2Z Antiarthritic, other J5A Antiviral, anti-HIV"
I need to extract N7C, J5Z, M2Z and J5A from this string and list these alphanumeric values in separate cells adjacent to the original text string. The challenge is that these alphanumeric references may appear in different positions within the original string with no fixed value e.g. a "," separating them. The alphanumeric references may also be 3 or 4 characters in length and there may be different numbers of alphanumeric references in the original string.
Another example would be (very different from the first):
"T2Z Recombinant, other K5B Radio-chemoprotective J3Z Antibacterial, other D3A Vulnerary A10C Symptomatic antidiabetic K6Z Anticancer, other R8A Antiasthma B6A Septic shock treatment I1Z Immunostimulant, other S1Z Ophthalmological R8B Antiallergic, non-asthma M1A1 Anti-inflammatory"
You can see that in this further example "A10C" & "M1A1" are 4 character alphanumeric strings wheras the others feature 3 characters.
View 9 Replies
View Related
Nov 27, 2008
I have a spreadsheet with 2 sheets (Railcar Record & Switch) They both contain the same column names and will contain the same data. I want to do, is to have the user type in the Railcar # on Switch, and have all the information in the columns on this sheet fill in. As you can see and as previously mentioned, the information is all stored on the Rail Car Record, I just need to isolate certain information on the switch sheet.
View 2 Replies
View Related
Jan 28, 2009
I have this code in my worksheet,
Private Sub WorkSheet_Change(ByVal Target As Range)
Dim response As Integer
If Range("AD2").Value = "1" Then
response = MsgBox("Rental Agreement Does Not Exist. Do you wish to continue entering information for", vbYesNo)
If response = vbYes Then
MsgBox ("Add")
ElseIf response = vbNo Then
Range("E2").Value = 0
End If
View 9 Replies
View Related
Dec 7, 2012
I have a large .txt file that I would like to edit using VBA. What I would like to do is to find each of the following text strings in the text file :
De:
De :
Envoye
A:
Objet:
If the character right before those text strings is not a carriage return (chr(13) then add a carriage return.
I would like the code to read each line in the text file and execute the task mentioned above.
View 9 Replies
View Related
Apr 23, 2007
What I have is a column of data(text) which contains amongst all the text three strings of text in ever cell in the column which I require copying into three adjoining cells
The data I require is :-
(a) The persons name which is always after the word ‘Requester’ e.g. Requester Steve Robinson
(b) Their office location which is directly after the persons name and is in brackets e.g. (Newcastle User)
(c) The Approving persons name which is preceded by ‘Approved by’ e.g. Approved by Christine Hunting
See examples 1 & 2 below
Example 1
CR0/CRZ3651 Requestor Steve Robinson (Newcastle User) Tel: 01234 798157 Approved by Christine Hunting
Please install and configure 2 Ultra 2s (typhoon and lancaster) for use as ARTE workstations. These workstations require Solaris 2.5.1 plus the same patches as before
Example 2
CR0/CRZ3118 Requestor Doug Cunningham (Newport User) Tel: 0114 9881480 Approved by John Smithers
Please provide support to set up Cisco 2691 Router and PIX-506E Firewall to enable external connection of a remote terminal for project work.
As you will appreciate the text in the cells is of non standard lenght and the three pieces of information can be located virtually any where in the text
View 9 Replies
View Related
Jun 16, 2009
I have data that I'm copying from a PDF and pasting in an excel sheet. The data that I need is mostly in groups of three rows, but sometimes there will be two extra rows under each data group. The two extra lines are extremely similar to two of the lines of data I need, so I can't think of a way to isolate them with a filter, and each document is 15,000 rows long, so doing it manually doesn't seem to be an option.
One of the lines of data that I need always starts with a dollar sign, so my thought is I could cut those so there would be a blank cell, and then I would just need a way to select the two rows immediately above every blank cell, leaving the two data rows I don't want below every blank cell.
View 9 Replies
View Related
Feb 28, 2013
I have a For loop, its an array with 5 file names in it. The loop checks for the files in the path, and if the file is there it places the file in the corresponding sheet in the workbook. If it is not, I get the option to browse for the file. Originally all 5 files were required, however now the requirements changed and only 4 are required the last file "byband.csv" is not required. So they want the option a message box telling the user the file is not required they can browse or keep going.
I worked out the second part but only by taking "byband.csv" out of the loop and writing a separate procedure for it, I wondered if in my original procedure I could isolate "byband" and if not found go to another part of the procedure. Basically, I needed to do the following:
If the file in the array byBand.csv is not found, Then:
vmbProceed = MsgBox(strFifthImportFile & strMessage, vbYesNo + vbQuestion, strTitle)
If vmbProceed = vbNo Then
Exit Sub
Else
go to Line 1 in the procedure below.
Code:
Sub import_Employee_Data()
'This is Step 1 when the frmDataImportSplash is activated.
'This procedure imports the byEmployee.csv sheet. The procedure checks if the file is
'in the same directory as the template. If the file is not there, a browser window appears to allow the user
'to browse for the missing file. A series of message boxes guide the user through the process and
'verifies that the user picked the right file. The user can cancel the import at any time.
Dim strPath As String
Dim strFirstImportFile As Variant
[Code] .........
View 8 Replies
View Related
Jan 28, 2010
finding or developing a compressing technique, which can compress a 7 number string i.e., 11,10,1,2,10,7,5 down to 6 or 5 lossless, that would be amazing.
I already researched many compression technique; Huffman, Run-Length and LZ78 which all do well on large data sets and I only have a few numbers. If it helps by converting the numbers to binary for better compression then I what to known. I know that a solution could be impossible as we would know about it already but may be someone knows a trick to get rid of one digit.
View 14 Replies
View Related
Jun 23, 2014
I am attempting to count up the sum of names that will be submitted, through a web form, in a single cell.
Example:
Cell B1 will have a bunch of names submitted to it. let's say 10: Marino, Elway, Namath, Montana, Manning, Brady, Romo, Bradshaw, Favre, Aikman. (these text strings will be all in one single cell)
I will have a list of names that are correct to compare to: Montana, Brady, Bradshaw, Manning. I can put those in its own cell to compare to. (C1)
How do i get the sum of 4 from B1 cell? If B1 only has 3 of the 10, how would it return the sum of 3?
Example:
A1 B1 (Submitted cell) C1 (List to compare to "right answers") D1 (sum from B1 compared to C1)
user 1 Marino, Elway, Namath, Montana, Manning, Brady, Romo, Bradshaw, Favre, Aikman Montana, Brady, Bradshaw, Manning 4
user 2 Marino, Elway, Namath, Montana, Manning, Brady, Favre, Aikman 3
This is I am sure a very newbie question, but I couldn't find anything on multiple text strings within one cell, and counting a sum of those.
View 14 Replies
View Related
Dec 13, 2006
I have two numbers, they are version numbers, I am having problems with my If then else and elseif statements.
59821 for version 5.9.8.2.1
is more than
5983 for version 5.9.8.3
even though 5.9.8.3 is a greater version number. Do you see where my problem is. How do I compare # by # reading it, checking to see what one is bigger and going from there. so when it gets to the 3 of the 5983 its bigger than 2 of 5982 of the 5.9.8.2.1
View 2 Replies
View Related
Dec 3, 2012
Different formula in different cells give me some text as output, to format this. I would like to copy and paste in one cell, so that I can easily then register a macro on top to wrap the text in one big cell.
View 1 Replies
View Related
Sep 3, 2013
I have a spreadsheet with 60k lines. One of the columns contains barcodes as per the example below, with a suffix of -XXX-XXX where the XXX are numbers. I want to highlight all the cells where the -XX-XX are the same number (as in the example below -303-303) how I can do this with a formula as I've around 30 spreadsheets each with 60,000 lines I need to sort through?
2500071189898-303-302
2500071189898-303-303
2500071189898-303-304
2500071189898-303-305
View 4 Replies
View Related
Jan 12, 2010
I have a column filled with names per row. I wanted to standardize it by using the following format.
The comma after the last name is always an indicator to me that it is the last name.
<First Name> <Middle Initial(if any)> <Last Name>
My actual records contains the following:
BIMBO EPPING - OK
AHMAD SADICK - OK
Salana, Laura R - need to be arranged to > Laura R Salana
Cantos, Rhoda Grace J - need to be arranged to > Rhoda Grace J Cantos
View 13 Replies
View Related
Jan 9, 2012
Can the below be achieved with any formulae or macro -
I have 2 worksheets (sheet1 & sheet2). In sheet2, i have some colors in column A (e.g. "red" in A1, "blue" in A2, "green" in A3.
In sheet1, i have some text strings in column A, e.g.
A1: I love red color
A2: my pen in blue
A3: Green grass
A4: Orange juice
A5: I like red and blue
What i want in corresponding cells in column B, is the name of the color which is in column A. so my output should be
B1: red
B2: blue
B3: green
B4: "NIL" (any error message)
B5: red (even though it contains 2 color, i am happy to show any one of the colors it contains)
View 2 Replies
View Related
Dec 9, 2012
n cell D3, enter a reference to the value in B7. Format the cell to display the text string Interest Rate.
In D3 i entered =B7 and the value for B7 popped up in cell D3, I am confused on how to enter the text string.
View 4 Replies
View Related
Jan 16, 2014
What can split up text strings into two cells.
I have this in A1
"X,Y Coord Dn = ",38033.8,42701.7
I have this in A2
"Bearing = ",128.9
I want to split this text into 2 cells.
The Formula I am using for the B1 is:
=IFERROR(LEFT(A1,SEARCH(""",",A1)+1),"")
result = "X,
The Formula I am using for the C1 is:
=IF(A1=B1,"",RIGHT(A1,(LEN(A1)-SEARCH(""",",A1)-1)))
result=38033.8,42701.7
The Formula I am using for the B2 is:
=IFERROR(LEFT(A1,SEARCH(""",",A2)+2),"")
result="Bearing = ",
The formula I am using for the C2 is:
=IF(A1=B1,"",RIGHT(A1,(LEN(A1)-SEARCH(""",",A1)-1))) result=128.9
I am using the same formula down each column; But i can not seem to ge the "X,Y Coord Dn = ", to work properly.
View 9 Replies
View Related
Nov 15, 2006
Column A has prepopulated list of values of various lengths, no spaces. Need to search column A for certain values at the END of each text string, and then populate the cell right next to it with another constant value.
Example: macro searches column A for cells with "123" at the END of the cell value (whole cell value could be A123 or ABC123, etc...). When macro finds the cells that meet this criteria, it places the constant value "XYZ" in column B right next to the cell in col A.
I need several variations on this theme and the # of characters being searched for at the end of each text string can vary. The constant value to be inserted in Col B can also vary. I imagine 'For Each' loops for every variation would work, I just do not know how to write the code for searching the "end of the text string" part of it
View 9 Replies
View Related
Oct 23, 2007
How would I write a formula to Countif or Sumif a cell contains a string of text? ie if I wanted to look for "Andrew" in cells that contained the text "AndrewKent", "Andrew Kent", "Kent Andrew" etc how would I do it?
View 9 Replies
View Related
