I need a fix to my macro that does not specify the sheet name. It needs to populate the active sheet. Here is my code.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Sheet1").Activate
' determine the next empty row
[Code]....
I have a userform in my workbook with a button to access it on twenty different sheets in the workbook. Currently the userform will only populate the sheet titled "Blank1". How can I change it so it will populate the active sheet without naming it? So no matter what sheet I'm on when I hit the submit button the userform will populate only the sheet I selected the button on? See macro below.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Blank1").Activate
' Unprotect Sheet
ActiveSheet.Unprotect
[Code] ..........
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
i have a userform which has txt boxes in it which when the data is put in to it goes onto a sperate worksheet.
would like to click on a command button to view the worksheet that the data has gone onto
have tried
unload me
sheet1 show
unload me
sheet1.show
and also with the worksheets name as well
See attached for explanation of what I need. I basically need a user form to appear asking for an specific time and services provided and transfer this data into another sheet. In sheet 1 there will be several time codes in pink for each service provided.
View 9 Replies View Relatedwas having a look and cannot find the question to this answer.
1,what i have done is made a workbook with a user form to input data (customer id is the unique record)
i now want to create a form where i can put the customer id in and tell it to show me that customers details and i can edit.
i have various textboxes/ combo boxes/ check boxes in the input form and i want all these to be included on the review form (for updating and changing the existing data).
2, also if possiable i will add a sheet with dates for deadline to cancel, can i get this to show on the new input form is it is to late to cancel?
I have a userform that stores data (1 row record with 20 columns) to a worksheet.Is there a way to grab the data back in (other or the same)userform, ambent(correct) data and store them back in the same row in the worksheet?
View 2 Replies View RelatedI need to populate a combo box on a form with the column name (A,B,C...etc) and the first row data. I need the code to check all columns in-case of missing column data.
Its important to note the data will be dynamic. In my add in, a form opens on requests and asks the user which column he needs to action data on. this could be on any one of several non similar spreadsheets.
E.G.: Combox to hold the following data (see column D has no data or header row):
Column A - Date
Column B - Rep
Column C - Customer
Column D -
Column E - Product
How can i pass this info to the form ?
I am trying to populate a listbox in a userform using a dynamic list of data in column Y or worksheet "varhold".
Here is my code:
Code:
Private Sub Userform2_Initialize()
With UserForm2.listbox1
RowSource = ThisWorkbook.Sheets("varhold").Range("offset($y$1,0,0,counta($y:$y),1)")
.BoundColumn = 1
.ColumnHeads = False
.ColumnCount = 3
End With
End Sub
When I run this procedure, the box is blank. There is no list.
Sheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A
Mr. Jones 3B 3B 3B
Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri
1A
1B
2A
2B
3A
3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available")
It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
I have a word template that gives a popup when started for the user to fill out. At present this is okay, but it is hard to maintain. So what I want is to be able to add all needed information in Excel - since our tools have the possibility to export my needed info to this.
I have a spreadsheet in Excel 2010 named 'Input TR'. This info I want in the popup macro in word. When choosing name from a dropdown menu - I want Excel to give me the choices instead of having it in the coded macro. After I have choosen the name - I want the product belonging for this name in the 'Product/Service:' dropdown menu, e.g Test 1 will give the value 1...5. (I will only be able to choose one of them)
Today - everything is coded in the word2010 macro, and thus difficult to maintain.
What this code keeps adding the data to the active sheet instead of the specified "Users" sheet:
[Code]......
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on.
from row 2 onwards the data has been populated for roughly 200 rows.
i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.
my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'.
how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row?
i know this is possible i just dont know how to do it.
I have a master sheet that contains all data relating to a particular Agent like Agent Code(Primary Key), Name, Bank details etc so on and so forth. Every month I have to make a new sheet which contains only a few of the columns from the master sheet. I have to manually select and copy each column for the specific agents to whom I have to make the payments. Now, I wanted to know..if there is any way in which I can enter only the Agent Code in the new sheet and it will look the code up in the master and copy the values of the relevant fields from the master to the new sheet.
View 1 Replies View RelatedI have receipt tracker where we are maintaining daily stock so I want vb coding for populate data from one sheet to other sheet.
When i enter slip no then data should be populate automatically from issue tracker to issue slip (Only yellow marking).
I have a user input sheet, where a user will input a process name & its link to the intranet. Next to the process name there is a column that takes the first letter from the process name so it can be used as an index point to transfer to another sheet. The sheet will have processes added all the time.
There is then 1 sheet for each letter of the alphabet. What I need to do is for a macro to run and then copy the name of the process in a cell and put the hyperlink in. Because there will be more than 1 process for each letter it will have to be transferred to different cells.
I'll start with the attachment since it's always easier:
Attachment 327508
This file is far from finished so there is some useless stuff there. What I'm interested in is in the sheet RecapTable (and in Etiq1 to Etiq4).
I'd like to write a macro that'll populate my Etiq1 -> 4 according to the RecapTable. Data would be set up as in Etiq1 A1:A3.
I don't have to have 4 template sheets and it could change if it's easier to do something else. The goal is to print labels so I maybe only 1 Etiq is needed, and the macro could populate, print, erase, finish populating, print again
1. Count entries in RecapTable (found something that does that! yeey!)
n = Worksheets("RecapTable").Range("A:A").Cells.SpecialCells(xlCellTypeConstants).count
((2. Divide that by 65 (which is the number of labels per sheet) and round at upper number. For example: if n=100, 100/65 = 1.54 so 2 sheets needed)) [maybe a useless thing to do]
[Assuming I only populate 2 cells]
If v is the row# in RecapTable,
If w is the column# in RecapTable,
If x is the row# in Etiq,
If y is the column# in Etiq,
v=1, w=1, x=1
[code].....
I have a spreadsheet which I need to populate the data from sheet based on current date. Cell C7 in the "Staff" tab needs to update from tab "Data" for John based on the current date . The current date is located in cell A3 in the "Staff" tab.
On daily basis, as I open the spreadsheet , cell C7 should update from the "Data" tab automatically based on the date in cell A3 in the "Staff" tab. Example, on January 4 2008, cell C7 should populate as 2 from the "Data" tab. I tried using the IF formula, but I cant expand the formula for the whole month of January since it is limited only to 7 arguments.
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
I have managed to use ADO to copy data from a closed book to my active sheet. Problem : it copies only the text, and not the dates or figures...
Code:
Sub TestReadDataFromWorkbook()
' fills data from a closed workbook in at the active cell.
GetDataFromClosedWorkbook "H:P&LYE TempDiv P&LP&L Report 020312.xls", "A1:Z1000", Range("A1"), False
End Sub
Code:
Sub GetDataFromClosedWorkbook(SourceFile As String, SourceRange As String, _
TargetRange As Range, IncludeFieldNames As Boolean)
'GetDataFromClosedWorkbook "C:FolderNameWorkbookName.xls", "A1:B21", ActiveCell, False
'GetDataFromClosedWorkbook "C:FolderNameWorkbookName.xls", "MyDataRange", Range("B3"), True
[Code]...
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
I run this macro that populates 7 cells based on data in another sheet. It seems that every sheet that have formulas that point to this sheet are being stuck in in the screen updating somehow?
Basically when I press F9 to calculate or change any cell that makes the sheet calculate it has like a screen burn in of all the sheets that are being calculated. I have been able to use this as a workaround:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
Application.ScreenUpdating = True
End Sub
But I shouldn't have to do this and it slows it down as it runs through this specific code about 11 times for each sheet that is re-calculating. Something is getting stuck in memory or something that seems to be causing this issue. This is the code I am using and I am not selecting any cells or sheets, but it appears that when I walk through the code that an image of the sheet comes up on the screen? The code in red seems to be what is causing the issues, but I do not know why? I can pass the 2 workbooks along to someone so they can see the behavior if they would like? Just let me know.
Sub populateEmployeeData()
Dim srcWorkbook As Workbook
Dim foundEmployee As Range
Dim srcWorkbookName As String
srcWorkbookName = "XIP_Employee_Data_" & Left(ActiveSheet.Range("B9").Value, 31) & "_" & Format(ActiveSheet.Range("B10").Value, "MMMDDYYYY") & ".xlsx"
If IsWorkBookOpen(srcWorkbookName) Then..........................
Any way to have a formula populate certain data from one sheet into another sheet...for all records in the data sheet.
I have thousands of individual locations that need to be separated by result into individual sheets.
So for instance:
In Sheet1 I have all the results as so:
location
date
chemical
result
error
A-1
1/1/2001
Aluminum
1.00
0.01
And in several other sheets I have a standard "form" set up for the way it is to appear in a report.
So, on the 'form' in Sheet2: the location of 'A-1' will have to populate in cell B6; Time of '1/1/2001' in E6; Chemical 'Aluminum' in A17; Result of '1.00' in B17; error of '0.01' in B24.
why the text box "txtjobnum" wont populate with the active cell in my "COMPLAINTS" sheet. The green code below is in the userform and the red text below that is in module 3.
Private Sub cancel_Click()
Unload Me
End Sub
[Code]....
I am running the formula =VALUE(RIGHT(CELL("filename"),15)) to read the tab name in a workbook with 90 sheets. When a new account is opened, the operator inserts a new sheet from a template (which contains the above formula), and labels the tab to the account number. The formula then 'reads' in the account number and performs look-ups based on it.
The problem is that the sheets are only working when the sheet is active. They all seem to reflect the data in the active sheet or give me a #VALUE error. Where am I going wrong? How do I fix the problem?
i'm having a hard time with trying to populate data from a userform to a specific column under a specific sheet. I've attached the file if you want to look at it. The file is basically a exam type with user logging and auto score computing.
The file is made of 6 sheets, 1st sheet is the log-in page where takers are required to enter their ID number and last name. 3 sheets of dummy test items, an Admin sheet that computes the score per test item and Database which I'm trying to compile all data in one column.
What I'm trying to do is that when they enter their ID and Last Name and then answer the 3 tests, they will be recorded in the database sheet in 1 column containg their ID, name and all the test results so that checking,grading and identifying who took the test would be easy.
So far I think I've done the part for the scores but I can't seem to get the userform for emp# and last name to populate on the field marked in the database.
I am trying to populate a blank sheet with data from multiple sheets given a certain condition.
Scenario: I have multiple columns on each sheet, but only three of interest to me. The first column has a header "Part ID", the second column header is "Description", the third column header is "QTY". I want to pull the data from all three columns to the new sheet when the QTY for that column IS NOT 0. The three columns of interest are always in Column A, B, and C.
The only thing that may make it tricky is that the data doesn't necessarily start on the first row of each sheet. For example, the headers for the first sheet are on row 17, and the headers for the second sheet are on row 5. So on and so forth...
I have a userform with a multi select listbox and 7 textboxes and a sheet with all the data on called "Metdata"
See "Metadata" sheet data below:
I want to:
1. Populate the Listbox1 with the data from column A, which starting at cell A3 and down until cell/row is blank. In the example "Metadata" sheet below I only two rows are present but that will increase to 200+ rows.
listbox1 = data from column A starting A3.
2. When the user selects a single item in the listbox1, I want the 6 textboxes to be populated with the data from the other columns related to the row selected as follows:
textbox1 = column B - starting cell B3
textbox2 = column C - starting cell B3
textbox3 = column D - starting cell B3
textbox4 = column E - starting cell B3
textbox5 = column F - starting cell B3
textbox6 = column G - starting cell B3
Every time the user changes the item selected in the listbox1, I want the textboxes to be populated with the data from the corresponding row selected.
3. When the user selects more that one item from the listbox I want all the textboxes to be locked = true and textbox7 = "Multiple files Selected"
Obviously when a single selection is made from listbox1 that all textboxes are unlocked for use....
I made a button in excel that when pressed automatically pops up a outlook email window with the excel file attached to it and written information that i want in the emal.
is it possible for me to have data from certain cells in excel populate automatically in the outlook email when i press the button to have the email popup?
what i would do is have certain words from some cells in excel fill in some blanks in a paragraph i have in the email that pops up when i press a button in excel is this possible of so how can i do it?
i am trying to say i will paste the VB code i have that allows me to have outlook email pop up with information i have in the email....