Userform Doesn't Unload
Nov 26, 2007I have a userform that after some operations won't unload. It executes subs from other buttons on it but it won't unload. I use ScreenUpdating but I always set it to true.
View 9 RepliesI have a userform that after some operations won't unload. It executes subs from other buttons on it but it won't unload. I use ScreenUpdating but I always set it to true.
View 9 RepliesWhen I unload userform2 it also unloads userform1. I need userform1 to be showing after unloading userform2.
View 3 Replies View RelatedPrivate Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
Using VBA I have used "LoadPicture" to load a picture to a picture frame on my userform. The actual file name is driven from a label. I now want to unload it so the value is None.
Example:
i have a userform which has txt boxes in it which when the data is put in to it goes onto a sperate worksheet.
would like to click on a command button to view the worksheet that the data has gone onto
have tried
unload me
sheet1 show
unload me
sheet1.show
and also with the worksheets name as well
I have wirtten a sub routine that builds a userForm dynamically based on user specific data. The form builds just fine and 9 times out of 10 the code at the end of the sub routine removes the form from the workbook. Since it's built on the fly I don't bother renaming the form. The times when it does not remove itself and the user restarts the program, part of the code written to the forms module references "UserForm1". and the the code halts. I know there is a way I can verify that UserForm1 has been removed and if not remove it before executing the next sub routine, I'm just tired and can't remember anything. Note that the UserForm1 contains CommandButtons that direct the user to Static UserForms that do not get removed, and those can trigger the sub routine to rebuild the dynamic UserForm.
View 3 Replies View RelatedI have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
View 7 Replies View RelatedI have a workbook with 3 sheets.
Sheet 1 is a sheet that has a shape with macro assigned to show Userform6.
Sheet 2 contains data that is displayed on Userform6. I use Userform6 to show statistical data that is on Sheet2.
Sheet 3 contains data that is input to ComboBoxes on Userform6 using the RowSource Property.
On Sheet 2, when I select Userform6, the data is correctly shown in all comboboxes and Textboxes......
On Sheet 1 when I select Userform6, only the comboboxes show the data...the textboxes do not show any data.
I do not want users to see the data on Sheet 2 which is why I want to show the Userform on a different sheet as the data sheet will be hidden from users.
Question is: How can I show Userform6 on Sheet 1 with all the data showing in textboxes?
I have this formula =COUNTA($A:$A)<=4 that limits amount of cells that can be populated in column A, I use data validation with "Allow costume" option and using that formula. It works fine from worksheet it displays the message when the limit is reached but it doesn't work when data is inputed/populated from userfrom, it allows userform to put more entries than set limit 4 in this case.
View 3 Replies View RelatedFollowing code from net and applied.
But runtime error on the highlighted line: "object doesn't support this property or method
Code:
Private Sub cbAddImage_Click() With Application.FileDialog(msoFileDialogFilePicker)
.AllowMultiSelect = False
.ButtonName = "Submit"
.Title = "Select an image file"
.Filters.Add "Image", "*.gif; *.jpg; *.jpeg", 1
[Code] .......
I have three CheckBoxes and I use the UserForm Initialize event to set them to False. I thought that Unload Me would reset them. It does not matter except I do not want to ahve problems later. If UnloadMe in any way resets them then I suppose the variable in the main code would have to pick up the values before the UserForm gets unloaded.
View 9 Replies View RelatedI use several different userForms at different times in my macro. I am having an issue where soemtimes Excel will be stuck (not frozen) after I close a form. Its almost like the form is being hidden but Excel thinks that it is still visible, so execution halts.
I've tried leaving the form with both me.hide and unload me. My code is pretty lengthy, so I don't think submitting it is appropriate. I believe my problem is my own lack of knowledge on hide vs unload.
Can anyone help me out here?
Attached I have kind of a score card, when you open the tab named TEAM1 a userform pops up and I pick the partners that played together, then I can pick an option button labeled 0,1,2 or 3, when it unloads, is it possible to make it put the corresponding number by their names in the empty row (W) of the week they are playing?, and not just the 1st open row available?
For example, if I pick the names Ryan and Stu the number will go under week 10 (X3) and not find the empty cell in (J3)?, I have no clue how to make this happen, but I made a userform to use, to try and make it work.
POOL LEAGUE TEST.xls
Code below. I need it to NOT run if the sheet week2 doesn't exist. Currently it gives a runtime error '9' out of range. This is due tot he sheet not being present because sometimes it is not generated.
Code:
Sub RemoveColWeek2sheet()
Dim ColNo As Integer
Dim rng As Range
Set rng = ThisWorkbook.Sheets("Week2").UsedRange
[Code] .........
What is the difference between Form1.Hide and Unload Me?
View 2 Replies View RelatedI try to unload my Addin, but i got this msg:
Thisworkbook is currently referenced by other workbook and can not be closed
Each time when i want to remove it from the main menue, I have to go to toolbars > customize and remove it.
before it used to be unloaded normally by unchecked the addin from the addin window.
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
I've got a formula:-
=SUMPRODUCT(--($D$9:$AY$9=$C$9),--($D$10:$AY$10=$C$10),--($D$11:$AY$11=$C$11),--($D14:$AY14))
Cells C9, C10 & C11 contain variable values so the user can choose from Groups A, B, C, etc using a data validation list. For any one variable this works fine. What I'm struggling with is when the user selects "All" from the list. "All" doesn't appear in the data so the formula as written doesn't recognise it and fails. What I'd like it to do is recognise "All" as meaning all entries.
i checked and checked and my IF function just gives me the wrong answer... attached is just a sample data..i have over 230 lines to check actually..
View 4 Replies View RelatedI have a worksheet with a listbox from the controls toolbox. I have to use the controls toolbox activex version because the box is formatted and I don't want a vertical scrollbar. I don't want to use a userform either because that would be major overkill.
When the view is set to full screen the listbox partially disappears. Paging up and paging down will redraw the screen and the listbox.
I've tried application.screenupdating with different listbox events but nothing works.
I'm trying to print the list of dates for the particular month . where the start date and end date is given by the user through user form.
I have written the below code to generate the dates. but the for loop still continues even when the start date is greater than the end date.
For example if i enter the startdate as 06/01/2014 and enddate as 06/30/2014. the for loop continues and displays date for all 40 days instead of stopping when the condition is met.
I have noticed this on more than one workbook with an Workbook_Open macro. When you open Excel, open Workbook1, do some work , save or don't save and close, then reOpen Workbook1 without having closed the Excel application, the Workbook_Open macro in Workbook1 doesn't run.
Closing Excel and reopening Workbook1 initiates the Workbook_Open macro. It's as if Excel remembers having previously opened Workbook1 and so it doesn't rerun the Workbook_Open macro the next time you open it.
I have a hyperlink to [url] that doesn't work. When I click it I get an error saying "Unable to locate the server or proxy server". But when I cut & paste the address from the hyperlink into my browser (no chance of mistyping), it works fine.
View 11 Replies View RelatedI am really new to using Excel macros and having an issue trying to insert data in a column where the data may or may not already exist. In Column A I have a list of product lines.
Prodline1
Prodline2
Prodline3
Prodline4
Prodline5
I want to search through this list and if Prodline1 does not exist, then add a Prodline1 row to the end of the list, then check for Prodline2, Prodline3 etc and do the same. On any given month I may or may not have data for the Prodline but I still need to see it in my list. I've tried this code below but only get data if I define an actual cell and it only works for the first one.
Set R = ActiveSheet.Range("A1")
endrange = Range("A65000").End(xlUp).Row
For i = 1 To endrange
[Code]....
I am trying to make Excel update a cell (C27) in my workbook's front page before closing, but it doesn't run at all.
Debug doesn't show any error...
Actually I am not sure if it's a code error or just the place i put this sub in.
......
Next
MsgBox "All Sheets have been updated"
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Worksheets("Front Page").Activate
If .Offset(27, 3).Value < DateValue(Date) Then
.Offset(27, 3).Value = DateValue(Date)
End Sub
I need a macro using worksheet activate event that will look a cell a10
and select if it doesn't have a formula
As said, the right click doesn't work anymore, last week it was working but it doesn't anymore. When I right-click wherever in the spreadsheet nothing happens but I know it's working because it works outside excel.
View 9 Replies View RelatedI named a range State, it contains a list of all the US state abbreviations. I do a data validation that refers to this range as a List. If I type in something that's not in the named range I get the error message I created for the Validation.
But - I don't get a drop down button. I tried to do the same validation on another cell and get the same thing. Other drop downs for validation appear.
what do i need to do when the fill tab doesn't go on to the next set of data. It is just repeating the data in the same column from the first calculation--it doesn't go on to the next set..what do I need to change when inserting my calculations...
View 9 Replies View RelatedI have a report that has been running in it's current state for several months with no issue. However, today it has decided that it doesn't understand the word 'selection'.
eg: selection.copy gives compile error.
Now... obviously NOT USING selection is preferred. However, let's put that aside for now because there are LOTS of these in this report and it's never had an issue until today.
Is there some setting that could have gotten changed or something?
It's happening on multiple computers and we're running Excel 2003 (standard) with SP3.