I'm trying to get the max value in an array that has 3 different values that are:
array(.0027, -.0001, -.0083)
...with worksheetfunction.max(). I get the correct return, however it's 2.70000007003546E-03! How can I get it to return .0027?
I'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
I received a request from a coworker regarding custom formatting some numbers in his spreadsheet. Those numbers are serial numbers of 20 characters long. Sometimes in my files I use this custom number formatting ###0 and its enough for the data I handle. But when I tried to use it in his spreadsheet, the following shows:
8456891070060510000
The cell must look like this: 08456891070060510302
The reason to have it like this is due to a Delivery Program requirement to deliver Set-top Units for repair. The Delivery Program do not recognize other format than the above. My coworker takes the data from a spreadsheet, and the spreadsheet needs a custom number format to display the correct number.
find a custom number format to be able to display as my coworker need it??
I have a cell with a number which is a result of several previous sums. It's a number with 8 to 11 digits. For example: 878567663.
I need to add each digit of the number, and then add again the result until I end up with a single digit. In the above example it'd be (8+7+8+5+6+7+6+6+3=56), then (5+6=11), then (1+1=2) and put the end result (2) in a cell
My main doubt is that I don't know how to use a simple "do while" type structure in Excel to achieve the above.
Questions:
1.) How do I create a formula to do that?. I have seen solutions in this board that let me add each digit but that's it... I need to "reduce" it until only one digit is left...
2.) What about if the lenght of the number is not always the same (fe. in one cell is 8, in another is 11, the next one is again 8...)?
I have in my cell a number, namely, 5260007005020024100055040300004110000000
What I would like to do is extract a set of digits from it,
Starting from the second 2, and shown here in the dots. I need all of the numbers in a separate cell, "52600070050200 .24100055.. 040300004110000000"
Hope this is clear. bearing in mind the number will remain as one so I would need to start at 14 then using LEN or something I'm not sure, extract the following 8 into another cell.
I have a range of numbers stored as text. I need to convert them to long numbers using vba. I tried typing a simple number = clng(a2), but that didnt work. Can someone help me with A) the right formula and B) the proper end(xlUp) format.
View 9 Replies View RelatedThis task joins a string together based on a number of characters per cell in the range.
I want to isolate one range, Col N, and add an IF condition to it.
There may be other issues preventing this from happening, e.g. the number of IF that exist in the complete formula. I will isolate the current cell and its requirements and then post the entire formula at the end for reference....
I have cells of data with a long string of numbers such as: 20090507225836. Is there any easy way to convert them to date/time format, such as below? 5/7/2009 22:58:36
View 5 Replies View RelatedI have a user form and to input the hourly wage i need to convert the text entry to a number whose type is LONG and not integer.
Does anyone know how to do this?
Or is there a way to input a number in a userform without a text box entry?
I'm doing the website for my company and things have to be entered into the site via spreadsheets. I have a list of numbers
e.g. 3652, 2845, 50925, 4809, 18392
that need to have the spaces removed in order for them to work.
e.g. 3652,2845,50925,4809,18392
There are over 500 cells with multiple numbers in each, so I don't want to do it one at a time, and rightly so, because Excel keeps changing the format and giving me something like
3.6*10^30 and loses all my commas.
Is there an easier way?
I am using the sum function to sum the following cells and the formula is too long. How can I make this work?
'Raw Data'!B3,'Raw Data'!D3,'Raw Data'!F3,'Raw Data'!H3,'Raw Data'!J3,'Raw Data'!L3,'Raw Data'!N3,'Raw Data'!P3,'Raw Data'!R3,'Raw Data'!T3,'Raw Data'!V3,'Raw Data'!X3,'Raw Data'!Z3,'Raw Data'!AB3,'Raw Data'!AD3,'Raw Data'!AF3,'Raw Data'!AH3, 'Raw Data'!AJ3, 'Raw Data'!AL3, 'Raw Data'!AN3, 'Raw Data'!AP3, 'Raw Data'!AR3, 'Raw Data'!AT3, 'Raw Data'!AV3, 'Raw Data'!AX3, 'Raw Data'!AZ3, 'Raw Data'!BB3, 'Raw Data'!BD3, 'Raw Data'!BF3, 'Raw Data'!BH3, 'Raw Data'!BJ3, 'Raw Data'!BL3, 'Raw Data'!BN3, 'Raw Data'!BP3, 'Raw Data'!BR3, 'Raw Data'!BT3, 'Raw Data'!BV3, 'Raw Data'!BX3, 'Raw Data'!BZ3, 'Raw Data'!CB3, 'Raw Data'!CD3, 'Raw Data'!CF3, 'Raw Data'!CH3, 'Raw Data'!CJ3, 'Raw Data'!CL3, 'Raw Data'!CN3, 'Raw Data'!CP3, 'Raw Data'!CR3, 'Raw Data'!CT3, 'Raw Data'!CV3, 'Raw Data'!CX3, 'Raw Data'!CZ3,
im not really sure what div/0's are na dhow to counter them but i understand from the error that im dividing by something that is not valid yet.
below is my formula, among others like this. i need some assistance in getting the ISERROR code in as i am struggling; ....
how can in compress the following formula
=IF(B3="Monthly",IF(B25="Windows 2003 Std",15,IF(B25="Windows 2003 Ent",30,IF(B25="Windows 2008 Data Center ",40,IF(B25="RHEL 5","30",IF(B25="Windows 2008 Web","15",0))))))+(IF(B3="Quarterly",IF(B25="Windows 2003 Std",40,IF(B25="Windows 2003 Ent",75,IF(B25="RHEL 5","89",IF(B25="Windows 2008 Data Center ",120,IF(B25="Windows 2008 Web","45",0))))))+(IF(B3="Semi-Annually",IF(B25="Windows 2003 Std",75,IF(B25="Windows 2003 Ent",140,IF(B25="Windows 2008 Data Center ",200,IF(B25="RHEL 5","149",IF(B25="Windows 2008 Web","90",0)))))))+(IF(B3="Annually",IF(B25="Windows 2003 Std",150,IF(B25="Windows 2003 Ent",300,IF(B25="RHEL 5","299",IF(B25="Windows 2008 Data Center ",400,IF(B25="Windows 2008 Web","180",0))))))))
I need to add more arguments to a countif formula, but I have maxed out the 1024 character limit.
Is there another way of writing this formula or is there a way I can add more arguments to this formula.
Formula is:
=countif(A2:A9999,"AH")+countif(A2:A9999,"ARHC")+countif...
I have a list of the arguments, can I do something like:
=countif(A2:A9999,B2:B50)
(with the list of arguments in columns B2 to B50)
Got a formula that goes like this: =IF((L1=1),"Product 1",IF((L2=2),"Product 2",IF((L2=3),"Product 3",IF((L2=4),"Product 4".... and so on for a further 100 or so products. Obviously, this formula is too long for one cell.
View 2 Replies View RelatedI'm used to using the VLOOKUP Function a lot, and up to now it has always worked fine.
Instead of returning the value of the looked up cell (text) as it usually does it seems to be returning a number, which has something to do with the row number of said cell.
I copy and paste a formula between sheets and it does the same so I'm pretty sure it's not something in the formula.
I need to write a formula but excel shows an error message "Formula Too Long." There are two long strings of the formula that I repeat several times. Is there any way to put these strings in other cells and reference them within the formula? Each of the strings looks very similar to this:
View 9 Replies View RelatedI want to do is copy a formula from one workbook to another workbook that I have open - have tried just copy and paste (only get the result, no formula is copied) and have tried paste special, but there doesn't seem to be anything relevant on the list. I'm sure there is a simple way of doing it.
View 2 Replies View RelatedI have a formula which is currently too long and which I'm sure could be done more efficiently. That plus Excel is saying the formula is too long. I have pasted the formula below and broken it up for clarity:
---------------------------------------------------------------------------------
=IF(AND(E3="Three",I3<=100),
(I3*VLOOKUP(C3,costsnetwork,10,FALSE)/100),
IF(AND(E3="Three",I3<=250),
(100*VLOOKUP(C3,costsnetwork,10,FALSE)/100)+((I3-100)*VLOOKUP(C3,costsnetwork,11,FALSE)/100),
IF(AND(E3="Three",I3<=850),
(100*VLOOKUP(C3,costsnetwork,10,FALSE)/100)+(250*VLOOKUP(C3,costsnetwork,11,FALSE)/100)+((I3-350)*VLOOKUP(C3,costsnetwork,12,FALSE)/100),
I have a small problem where I 'm using an input box to enter a name of the sheet & the date in a cell, However when it asks the user to enter a date it only shows a number as the date? For example I enter 12/31/2009 it places 40178 in the cell?
View 2 Replies View RelatedI have the following formula that returns a number, however it returns the first number it comes to when the criteria is met,
View 2 Replies View RelatedI want to set formula to cell S1 via vba.
This is the formula: =IFERROR(VLOOKUP(H3;'[VATCompanies.xlsx]1'!$A:$B;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$D:$E;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$G:$H;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$J:$K;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$M:$N;2;0);IFERROR(VLOOKUP(F7;'[VATCompanies.xlsx]1'!$Q:$R;2;0);I7))))))
Is there a work around to pull data from cells in excel to another tab with standard language? For example the template language will stay the same except in example A's case the last sentence "0.0" hrs will vary based what's sitting in B34.
It's stating the formula is too long. Is there too much text?
Sometimes the link would be in the middle of the text as shown in example B below with dates 00/00/00.
EXAMPLE A
For any leave of absence that is granted for more than 10 days, time off is governed under the Disability Bank Policy. Under the Disability Bank Policy there is a 10 day elimination period which must be satisfied prior to gaining access to your disability bank. During this 10-day elimination period, you are required to use your sick time for the first 6 days (48.00 hours) and vacation time for the remaining 4 days (32.00 hours). After this elimination period, we use all the time accrued in your disability bank. Currently, you have a disability bank balance of "00" hours.
EXAMPLE B
After this disability bank is exhausted, you will use all remaining and future paid time off balances from your vacation/CME/holiday banks. Because your leave begins in 00/00/00 and ends in 00/00/00 we will advance you future paid time off balance thru 00/00/00. Once those balances are exhausted the remainder of the leave will be unpaid. Per our policy, should you not return to work, you agree to pay back any time advanced to you within 30 days of your separation from the company.
I'm receiving this message when I attempt to use the Find, Replace function. Formula is too long". I have a column of cells containing text only. ( about 2-3 paragraphs worth) I'm trying to replace a name with another name, which works fine where the cell contains a single or few sentences, but fails to replace when the cell contains too much information.
View 8 Replies View Relatedi have a list of 100 product codes in row b2:cw2, colum A contains dates in the month, yesterdays first and then each previous day before that going down, and the columns B:CW are the number of each particular product sold on that day.
I'd like to insert a formula in row 1 which will look down each column and count the number of blank cells from B3 to the first cell to contain a value, i.e. the number of days since this particular product was sold.
formula to find specific text from statement.
I manage to use formula find for 1 text in 1 statement, but in confuse how to get another text found if i have "8 text" to find. Generally, there will only be "1 text" for each statement.
Maybe in 1 statement there have only "IC" or "Staff Tagging" or Name" or "Product" or etc till 8.
I am working on using an excel workbook as part of a roll playing game and I am trying to record a macro and then put that in a command button which uses the randbetween, multiple if statements and multiple vlookup functions. I have successfully done similar things by just recording a macro and then pasting that into the VB editor. However this time I get a unable to record macro after putting the formula in the selected cell. I have tried copy and paste and just typing the formula with the same results.
Upon executing the formula I then want it to copy and paste special- values the result.
I'm assuming I have to put the VB code in manually but when I tried to do the formula I got a syntax error.
The worksheet I am working on is named new and I've included the formula in the a text box. I would like the result to show in J12 and be triggered by pressing the cmnbutton in k12.
I am using the below formula to distinctly count the number of customers that match the criteria that I have in Cells C7 and B10. The data is in a separate worksheet, that I am showing Named Detail of which will be changing on a monthly basis, so a pivot table does not want to be used. The detail data ranges from row 7-40,000, and the file is currently 8610KB's, and can potentially grow.
=SUM(IF(FREQUENCY(IF(Detail!$A$7:$A$40000=C$7,IF(Detail!$B$7:$B$40000=$B10,IF(Detail!$D$7:$D$40000<> "",MATCH(Detail!$D$7:$D$40000,Detail!$D$7:$D$40000,0)))),ROW(Cust)-MIN(ROW(Detail!$D$7:$D$40000))+1),1))
This formula works but takes an excessive amount of time for one caluclation, and I need this for multiple column and row critera. So, can this calculation be changed in order to get the same result with faster calculation time? I am using Excel 2003.
I get distinct word with this formula i have 30,000 rows with below formula taking lot of time with dragging to all cell
{=INDEX(List,MATCH(0,COUNTIF($b$1:b1,List),0))}
I have a formula I've been using for a long time which uses VLOOKUP to find results based on various reference cells, and then adds them up. To avoid errors caused by VLOOKUP not finding anything for one of the references I have also used ISERROR. The formula returns a blank if the calculation returns a zero.
I now need to bring further references in to the calculation but, using the format I have been, the formula is now too long. Here is my extensive formula: