I have three different values in three different columns and I want to find the maximum amongst the 3 values.
A1 B1 C1
100 50 40
in D1 I have written a formula
=MAX(A1, B1, C1)
But it is returning an error saying formula you typed contains an error
I'm not sure what I'm doing wrong with this formula in Excel 2003. I figured out how to do it in Excel 2007 using the SUMIFS statement, but alas Excel 2003 won't take a SUMIFS statement.
I have data in a column, J of Worksheet B that I need to add based on 2 conditions. The first conditions are in cells AJ6 to 8 on Worksheet A. The second condition must be matched from Column A of Worksheet B to the same condition in Column F on Worksheet A.
I'm using the formula below to count the distinct number of values in the range, many values are repeated so this formula only counts each one once, it works sometimes. For some reason I get a #Div/0 error once in a while.
The entire range might not always have a value, when I get the error if I add text to the remaining cells of the range the error is cleared.
I do not want to use a If (iserr(myformula),0,myformula)) because there are still values that need to be counted even if the range is not totally populated.
=SUMPRODUCT((B16:B1500"")/COUNTIF(B16:B1500,B16:B1500&""))
I'm trying to sum cells in a column that meet the following criteria: If the first character of the cell = "V" then sum the last two characters in the same cell. I.e., if A4 = "V12" and A6 = "V10", then I need the formula to return the total 22. All other cells, whether blank or starting with a different letter need to be ignored. My attempts have failed, including this last one that returns a #VALUE error.
=SUMPRODUCT(LEFT(A1:A10,1)="V")*(MID(A1:A10,2,2))
whats happening to my workbook. On a worksheet called Data, i'm pulling in a lot og data from a database. Then on another worksheet i'm looking for certain things on the data sheet and counting how many there are.
This all goes along find until i close the workbook, and then re-open.I click the automatically update button that appearsand once it finishs updating all my values are replaced with #Value.
This is the formula i'm using.
= SUMPRODUCT(--(Data!$X$1:$X$49871="4")+(Data!$X$1:$X$49871=4),--(Data!$M$1:$M$49873="FTS-Unix"))
I have created a calculated column in PowerPivot and inserted a formula that worked in a normal excel spreadsheet however, this formula does not work in PP anymore.
=find("green",Table1[Name],1)
Name column:
NAME: Bag green
it should find "green" in the name and return the position. Hoever it alway returns the error, that the find function could not find the string.I have attached an example spreadsheet.
i have a workbook that draws numbers from other workbooks.For some reason every time i close and reopen it the fields are blank.I have to go in and open each workbook for the cells to populate.
View 1 Replies View RelatedI need a dynamic formula in A1 that returns min value in column B in a range of the last input and 15 cells back.
Then I need another dynamic formula in B1 that returns max value in column B in the same range.
I am trying to return several values >10K, >5K, >3K, >1K,
View 7 Replies View RelatedExcel 2010: I'm working with a sheet where I would like to get accurate results on the make and model of cars sold in a given week. The workbook contains several worksheets each representing weekly sales numbers for different vehicles.
The Make-Models tab has the lists used to create the drop-down selections.
The Sales tab allows one to create an ad hoc report on the total number of vehicles sold, by Make and Model. Cell B2 is named 'SelectedModel' and used in the formula found in column E, Total Sold.
Problem: When I select Honda, for example in B2 of the Sales worksheet then select Accord in cell B3 of the same. The results returned in E2, E3 and E4 are 2, 3 and 4, respectively, instead of 8, 3 and 7.
2 Honda Accords were sold on Monday and 6 on Tuesday of the same week. My formula is only returning the first matched value of 2 whereas I would like it to return 2+6, 8 for week 1. Same goes for other weeks.
Select any other make and model and notice the problem follows. I believe the error is due to incorrect usage of the formula or incorrect formula altogether.
IF(ISNA(INDEX(Week1!E:E,MATCH(SelectedModel,Week1!B:B,0))),0,
INDEX(Week1!E:E,MATCH(SelectedModel,Week1!B:B,0)))
I need a formula to count cells based on the date, so that I can have a blank cell when the answer is 0. I am adding values cumulative and future cells need to be blank because I have a graph that has a trend line and I don't want the trend line to fall off at the end. I also don't want to have to go back to this every month and update it.
Column A
Date
1/2/2007 0:00
1/3/2007 0:00
1/10/2007 0:00
2/10/2007 0:00
2/10/2007 0:00
2/15/2007 0:00
3/22/2007 0:00
3/22/2007 0:00
3/22/2007 0:00
4/31/2007 0:00
4/31/2007 0:00
4/31/2007 0:00
Column B
Invoice #
CM-0003881
CM-0003882
CM-0003883
CM-0003888
CM-0003928
CM-0003932
CM-0003933
CM-0003985
CM-0004007
CM-0004008
CM-0004009
CM-0004065
I have this formula in cell F3 that will add the dates through the end of January:
=SUMPRODUCT((A1:A1000>=DATEVALUE("1/1/2007"))*(A1:A1000
I have this code that only returns a #NAME? error. I'd love it if someone could take a look and let me know what you think might be going on. If it factors into it, D1:D4 each contain one of the following: USD, AUD, GBP, MX and E1:E4 contain the corresponding exchange rate. Also, J7:AJ41 contain a function that returns a number. Let me know if you need more information. I just can't figure why this is not working.
Sub newtabs()
Dim x As Range
Dim Curr As String
Dim Rate As Double
For Each x In Sheets("Cash Flow Detail - WkCount").Range("D1:D4")
Curr = x.Value
Rate = x.Offset(0, 1).Value
Sheets("Cash Flow Detail - WkCount").Select
Sheets("Cash Flow Detail - WkCount").Copy After:=Sheets(2)
Sheets("Cash Flow Detail - WkCount (2)").Name = Curr
Cells(7, 10).Select
ActiveCell.FormulaR1C1 = "=IF(activecell.offset(RC7)=" & Curr & ",('Cash Flow Detail - WkCount'!RC*" & Rate & "),0)"
Selection.Copy
ActiveCell.Range("a1:aa35").Select
ActiveSheet.Paste
Next
End Sub
I have a sheet that uses vlookup when the lookup returns #na error how can i conditional format these cells to so text is same as background
View 9 Replies View RelatedMy formula =IF(OR( FIND("Bugs",E2),FIND("Daffy",E2)),"/wkly",0). Always returns #VALUE! error. I can understand if neither value occurs in the string, what confounds me is if one of the two does occur in the string If I shorten to
=IF(FIND("Bugs",E2),"/wkly",0)
Then the expected output is returned
I have sumproduct formula that returns #N/A error and I'm not sure why
=SUMPRODUCT((YTD!$A$2:$A$2599=B$10)*(YTD!$P$2:$P$2599=$Q19)*(YTD!$E$2:$E$2599))
If I narrow the range from $939 to $1093 then the formula works.
But that is only evaluating 1 unit of 10
As I add worksheets to the workbook and update the unit numbers in B10, the entire range needs to be evaluated for matching criteria.
workbook is way too large to upload.
Is there a way in which you can create an if function or similar to give a reason for why the cell of data has an error.
Basically i have some data in a table, and when a #num! error pops up id like to in the cell next to it give a sentence stating why this has happened.
E.G.
Cell A1 Cell B1
#Num! Number error due to 'x' being too small
Not sure how i can get this to work, i have tried a basic if function but that hasnt worked.
if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
I am using MS Query to join 3 worksheets together.
I need to calculate one field but it keeps returning an error.
the 2 fields are part of the same table calle "Trades"
The fields are : Quantity and USD Price
USD Price is calculated initially in the worksheet using the current exchange rate.
I can display each fields separately (no problem) but when I try to multply the 2: I get a syntax error.
Things i have tried:
I tried to multiply Quantity by 2 and it works. when I try to multiply USD Price by 2 I get the syntax error.
I also tried to copy the values (not the formula) into a new column called USD Price2 and:
- Quantity*USD Price2 : syntax error
- USD Price2*2: Syntax error
Private Sub Workbook_Open()
'Application. ScreenUpdating = False ' Turns off screen updating
Dim Filename As String
Dim nFam As Integer
Dim cRow As Integer
Dim i As Integer
ws As Worksheet
Filename = "O:BVRMusers_sharedJCIntraday ToolFamily List.xls"
Workbooks.Open Filename 'Opens Family List
'Count the number of rows (Families) in Filename (Family List)
Set ws = ActiveSheet
With ws
. Cells(1, 1).Select
cRow = .UsedRange.Rows.Count
End With
End Sub
i cannot get ws to be set as the ActiveSheet. i receive a run time error 91 each time and cannot figure out what is wrong. i've used this code before under subform functions, but this is the first time i've placed it in the "ThisWorkbook" area.
Having a problem with a simple udf to calculate values across multiple sheets using the calling cell as a reference point. It works great until you open another workbook and then switch back. At that point all cells calling this udf return a #value! error. If I type anywhere on the sheet all of the values will recalculate but this is less than ideal for the end users here. below is example of concept
Function TestMe()
Application.Volatile (True)
Dim strCallAddress As String
Dim intSubTotal As Integer
strCallAddress = Application.Caller.Address
intSubTotal = Worksheets(2).Range(strCallAddress).Value
intSubTotal = intSubTotal + Worksheets(3).Range(strCallAddress).Value
TestMe = intSubtotal
End Function
I Spoke too soon here, I am getting value errors, how to do it with conditional formating. I tried if cell value is =to #DIV/0! then white (dosent work). Richard this dosent seem to work mate =IF(SUM(F6:V6),"",AL6/SUM(F6:V6))
View 9 Replies View RelatedI'm having problem with ranking results (ascending) with similar values e.g. values 1, 2, 2 and 4 fails by use of Rank-formula (rank: 1, 2, #N/A and 4) as value 2 appears twice.
I've attached a simple example of the problem.
I've managed to set up a gradebook.
However, is there a way that I can get Vlookup not to return N/A when I have a blank cell on the report (not in the data table). I want to be able to calculate the progressive grade average of a stduent as the year progrsses.
I have a file created in Excel 2003 that uses a vlookup to reference another file, also created in Excel 2003. The function returns VALUE when the referenced file is closed. I get the VALUE error whether or not I update links upon opening the file. If I open the source file, the function calculates properly.
Here is the formula when the referenced file is open:
=VLOOKUP(A38,'[June Scorecard confirmation.xls]VPSC Summary'!$C$10:$F$22,4,FALSE)
The full & correct path appears in the formula when the referenced file is closed.
Columns C, D & E in the referenced range contain text, column F contains a Sum. This file is linked to another file, also using lookups. The linked area in this file works without problem, but it is a precedent to the calculation in column F.
Both these files reside on a network in subdirectories of the same logical drive. I am using a laptop that briefly had Excel 2007 installed on it, but was wiped clean before it was issued to me.
I am using this code below to delete individual matching values (the value in "A2") from a column.
Code:
Set Found = Columns("AH").Find(what:=Range("A2").Value, lookat:=xlWhole)
If Not Found Is Nothing Then Found.Delete Shift:=xlShiftUp
I am receiving error "Delete Method of Range Class Failed" in the highlighted line.
I have an issues with a formulae I have written to measure two factors;
A; How many different countries appear within a certain date range. B; What countries are they.
I tried a unique list, but could not get it to work within a range? I dont particuarly care how the data is pulled through as long as I do it. At the moment I have become stuck in 'Unique Ranges' and have n given up?
The formulae issue is in the tab "Problem_Formulae", the dat in the sheet 1, and the date ranges in sheet 2. Also, just to make life a bit more challenging pivot tables are a no go .
I have the following
Private Sub Workbook_Open()
Worksheets("Sheet1"). Range("L5").Value = Date
End Sub
When i try and run the code it returns an error saying: "Compile Error, Cant Find Project Or Library" and it highlights the word "Date"
Formula(s) to do as explained in the attached example.
Example_formula.xlsx
I have a code that inserts a new column after every 7th column. I want to include a formula where every 7th column value is subtracted from the values present in the column before the 1st, or you can think of it as subtracting 7th column of the present group from the 7th column of the previous group. Example: The range of my data starts from col F, then
F (7th) New Column (G) H (1st) I (2nd) J (3rd) K (4th) L (5th) M (6th) N (7th) New Column (O) P (1st) Q (2nd) R (3rd)
So, New Column (O) = N - F
and the next New Column (W) = V-N ...
NOTE: Column G can be ignored.
I want to add a looping function to this so that it will continue to subtract for the other respective columns as well. How do I incorporate this into the following code?
[Code].....
I'm using Excel 2013.
see the attached spreadsheet including the data. In Column AA I have created a formula that looks at Column B, and pulls each unique value from that column. add to this formula, or propose a new one, that pulls unique values into column AA if at least one of the rows has an "Actual Finalization Date" in column D that is in 2014?
View 1 Replies View Related