Macro/ Formula To Match 2 Rows Of Data
Apr 17, 2009
I have multiple rows of data which I have sorted by two identifiers. Where a set of data matches on both of these identifiers I would like to further compare the two rows based on a set of 8 criteria (in coulmns C-J). Where the rows match across both identifiers and across the 8 sets of criteria I would like to merge these into 1 row and copy to another sheet, where there is a mismatch on 1 of the 7 sets of criteria or if a row's 2 identifiers do not match another row- I would like the data to remain as is (or move to another sheet for non matches).
Please see below example.
For Pair 1 & 2: these match across the 2 identifiers and across all 7 sets of criteria so these would be shaded white and moved to a different sheet (or the addition of match at the end would also suffice).
For pair 3: these match on IDs but not on all 7 criteria again "no match" would suffice here.
For the final row it does not match on ID therefor I would need to "no match".
View 9 Replies
ADVERTISEMENT
Jul 10, 2008
I have two columns of data as follows:
10:57:42 273
10:57:42 263
10:57:42 253
10:57:42 241
10:57:37 273
10:57:37 243
10:57:37 249
10:57:37 261
10:57:37 253
11:04:47 241
11:04:47 253
11:04:47 263
10:54:31 254
10:54:31 240
10:54:31 265.......
View 9 Replies
View Related
Jan 11, 2012
I've already found a TON of threads about this process but nothing that matches specifically what I'm trying to do.
I have a spreadsheet that I'm using to auto fill other tabs with data that only matches specific criteria. Here's what I'm looking to do:
Columns I, J, K, and L may be marked as either Y or N (or blank). I have different sheets that require 1, 2, 3, or 4 of those columns to match Y. For example, on sheet 2 I want to copy the entire row if there's a "Y" match on column I and J. On sheet 3 I want to match "Y" against, I, J, and K. Sheet 4 I need to match only L, etc.
I need the data copied into the existing sheets to start on row 7. I have other data on rows 1-6 that cannot be moved.
I'm running Excel 2007.
View 5 Replies
View Related
Aug 14, 2014
I am trying to find a formula to set the print area to only print rows that contain actual data and ignore the formula.
The spreadsheet is going to be used by multiple users and locked from editing so I have formulas set in column H all the way to row 200 but no data is actually in column H until they enter a date in column B. Since there are formulas in column H when the user tries to print, it is printing all pages even if there is no data.
Here is my formula in H2:H200 =IF(B2="","",SUM(B+14))
View 11 Replies
View Related
Sep 6, 2007
need a quick macro to match rows in two columns as per demonstartion below.
View 9 Replies
View Related
May 14, 2014
My issue concerns going down rows in a data set. Due to the fact that the data set I am pulling from is not standardized, and roughly 10% of the data set has two extra rows of extraneous data below the reference cell (foreign currency balances which I don't need). The point in my formula is the "+2" (down two rows) condition. I needed it so that the "+2" is replaced with a condition inwhich after the reference cell in the INDEX( and MATCH( function is found the command goes down rows until the term "USD" is found. My formula is as follows:
{=IFERROR(INDEX('SHEET1'!$A$9:$O$10000,MATCH((RIGHT(C7,8)),(LEFT('SHEET1'!$A$9:$A$10000,8)),0)+2,11),INDEX('SHEET1'!$A$9:$O$10000,MATCH((RIGHT(C8,8)),(LEFT('SHEET1'!$A$9:$A$10000,8)),0)+2,11))}
View 1 Replies
View Related
Aug 17, 2009
I want find the data in some rows that same with one or more cell and automatically fill the data. And for more details, I have attached the examp file (Examp.xls).Antoni
View 3 Replies
View Related
Nov 30, 2009
need to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.
This is what I have so far, but I can't seem to get the loop right.
Rows("2:2").Select
Do
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
activecell.Offset(-1, 0).Select
Range(activecell, activecell.Offset(0, 5)).Copy
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
Selection.Offset(1, 0).EntireRow.Select
Loop
View 5 Replies
View Related
Dec 26, 2013
table1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
View 3 Replies
View Related
Feb 23, 2012
I have a table where I want to match data to a reference. The reference appears in more than one row in the first column and I want to find out which row numbers that reference appears in. However, using MATCH I can only find the first time that reference appears. Is there another way of finding at least the next row that the reference appeared in?
E.g. in the table below, Match always returns row 2 when searching for ID 123. Can I set up the formula so that it tells me where the next match appears, working downwards??
IDColour 1Colour 2matchdesired result123greenorange23123greyspring green24123purpleblue2#N/A144blueturquoise56144pinksaphire5#N/A180redyellow7#N/A129yelloworange8#N/A
View 1 Replies
View Related
Sep 26, 2013
I need a macro that will combine/consolidate rows when cells from 2 separate columns match. example...
beginning:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 1064 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 80 unleaded 1101 100100
row 4 Seminole 30 dyed dsl 3421 100100
This is what I need the macro to do:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 2165 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 30 dyed dsl 3421 100100
View 2 Replies
View Related
Jun 9, 2009
I have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
View 9 Replies
View Related
Aug 21, 2013
In an Excel sheet; I am trying to match and align data in column C to data in column A, but it is essential that the data contained in the entire row (coln B thru to coln W) moves when Column C is matched and aligned with column A.
Sample workbook attached.
View 9 Replies
View Related
Nov 10, 2011
I have a set of 50 or so large worksheets that need updating each month. My problem is the figures I need to update these sheets with are formatted differently (different alignment of blank rows) to the destination.
I'll try to illustrate, this is the sheet I need to add data to on a monthly basis... (you'll need to imagine the numbers in column form as I'm no HTML expert)
May June July
23 34 45
65 34 45
34 23 23
[Code] .......
The blank rows need to remain uniform. When I need to paste in August's data the blank rows in the raw data extract are aligned differently and it's a laborious job deleting and inserting cells to get them to align (the sheet has hundreds of rows).
I'm capable enough of recording a macro to replicate the delting/inserting of cells BUT of the 50 or so sheets I need to update there's no uniformity of where the blank rows occur. To further exacerbate, there's no uniformity over where the blank rows occur in the data that needs to be pasted in, either. The blank rows already in the worksheets HAVE to remain and can't be deleted or altered.
View 9 Replies
View Related
Jan 7, 2013
Using Excel 2010.
Rows 1 and 2 (range: A1:CM2) within Spreadsheet X contain the range of data that I need.
Within Spreadsheet Y, Row 6 will change monthly and will be input by the user. The value in Row 6 equals the data in Row 2 in worksheet X.
I need to put a formula in row 4 of spreadsheet Y that returns the value of Row 1 in Spreadsheet X.
Unfortunately, I cannot change the spreadsheet layout, otherwise I could do an HLOOKUP formula using Spreadsheet Y Row 6 and Spreadsheet X Row 2 and be done with it. I assume that I need to use an Index-Match formula, which I am not as familiar with. In addition, all of the online support I have found explains Index-Match with data in columns, not rows.
View 1 Replies
View Related
Feb 8, 2008
I have run a pivot table state, city, address, floor and all the maths works out fine.. but the name in the 'total' rows, does not match the name in the data rows.. e.g. texas, dallas, 57 oilrig street has total rows saying CA toal,Newark total, 560 mission street total (obviously split across the appropriate rows for each total) but in each case, all those square feet, or dollars add up perfectly, for the data rows above them. double clicking the totals shows no sign of the rogue location... but these same entries are in EVERY set of totals in the pivot table!
POSSIBLE clue.. I generated the pivot at home, on Office 2003, and am now viewing it at work in 2002 version. (buit this could have nothing to do with it at all. Am I missing something obvious, or do i have good reason to pull my hair outr in frustration (first time this has happenned in a year of doing these reports daily)
View 2 Replies
View Related
Apr 2, 2009
I have configured conditional formatting to check valid entries in a dependant list. I used the solution provided by SHG at:
http://www.excelforum.com/excel-prog...ant-lists.html
Now I need to use a macro to activate and deactivate the conditional formatting due to performance issues.
When the formula for data validation includes the indirect funtion I got a compile error and the macro won't run.
View 3 Replies
View Related
Oct 8, 2009
i am looking to create a small table from the attached worksheet that will show how many users there are for 3 different locations, the user names are in column a and the locations in column c. the thing is, the actual worksheet i am using in work contains almost 1000 lines, and is being updated daily, there can be multiple entries for a person for projects etc.. and someone can even be in the availability and pto area's without being in the main project area. each resource can only be on one location so that will not change.
also, there can be blank cells for resource which should not be counted. i was wondering if there was a formula or a macro that would count the distinct number of names and reference them to the location and give a count of resources by location?
View 2 Replies
View Related
Dec 13, 2012
Refer the attached work sheet and any formula to calculate the values once the criteria is met.
To calculate % after multiple look ups.xls
View 7 Replies
View Related
May 28, 2013
I've a data looks like below..
Name
Yes/No
Marks
Pass/Fail
Susheel
60
Pass
Sanjay
30
Fail
Susheel
Yes
10
Pass
Mohan
21
Pass
I want to populate the data in main sheet for unique name...based on some criteria.
1- Name Should match in both file
2- If "Pass" then it Should be "Yes"
View 5 Replies
View Related
Jul 7, 2014
I am working on a spreadsheet where I need to have data from different sheets added but based on the instructor whose data I want to see in the summary sheet. I want to be able to type the name of the instructor in a cell and have all of the data appear below. I believe that an index match formula would work, but I do not know how to have the data from the different sheets added nested in the formula.
View 2 Replies
View Related
Oct 25, 2011
I'm trying to match the data in a column from one excel file with another column of data from a separate excel file. If there is a positive match, I would like it to return a cell data on the same row in the following column on the first excel file. I understand that this can be done with vlookup but because the data in separate excel file contains commas and thus I can't get a true match.
To visualize what i'm trying to illustrate, i'll breakdown into steps.
I would like to match the data below in excel file 1 to excel file 2.
Excel file 1
83883
89342
83603
84445
434961
Excel file 2
83883
89342, 541879
83603
522354, 84445
83985, 434961
Lets imagine that there is another column of data next to the list of data in excel file 2. If there is a positive match between excel file 1 to excel file 2, i would like to return cell next to the data in excel file 2 on the same row.. to the cell next to the data in excel file 1.
This is difficult as I have a column with few thousands of such data.
View 9 Replies
View Related
Nov 15, 2012
Any formula that can look at the data in multiple columns and check for a match - returning a value such as YES or NO. Below is an example of my sheet.
A
B
C
D
E
F
G
1
Name
Number
Name
Number
Name
Number
Match?
[Code] ..........
Basically the formula would be in Column G and would look at B, D, & F to see if they match or not. In the example above - row two - they all match. So a True, 1, or Text option such as YES would be great. Same as row 3 only you can see they are different.
View 5 Replies
View Related
May 10, 2013
I need a formula that effectively reformats data.
Original data:
Country
Name
2010
2011
2012
A
John
5
6
7
B
James
3
4
5
Into this format:
Country
Name
Year
Value
A
John
2010
5
[Code] ...........
View 5 Replies
View Related
Jan 4, 2007
I have a data entry sheet for attendance that shows the individuals name, date and hours attended. Each individual attendance is addedd to a new row. I need to transpose this data and display it in a report table, with the names in column A and showing hours worked for each day of that week. The formula needs to accomodate the growing data entry sheet as records are added (I'm using a date picker to change the week in the report sheet).
I've tried match, lookup and index and have confused myself thoroughly! Below is a sample of the data entry sheet (on left) and report table (on right)
******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutH1I1J1K1L1M1=
ABCDEFGHIJKLM1SurnameDateHours**Surname1-Jan2-Jan3-Jan4-Jan5-Jan6-Jan7-Jan2Smith1-Jan-076**Smith63600363Jones1-Jan-076**Jones66000304Rogers1-Jan-076**Rogers60600005Hathaway1-Jan-076**Hathaway60600006Pearson1-Jan-076**Pearson60000007Wills1-Jan-076**Wills60000008Smith2-Jan-073**********9Jones2-Jan-076**********10Smith3-Jan-076**********11Rogers3-Jan-076**********12Hathaway3-Jan-076**********13Smith6-Jan-073**********14Rogers6-Jan-073**********15Rogers7-Jan-076**********16Rogers8-Jan-076**********17Rogers5-Feb-076**********18Smith6-Feb-076**********19Jones6-Feb-076**********20Rogers
View 9 Replies
View Related
Jun 2, 2012
I am very new withe macro I recieve every day a CSV file from our supplier withe a list of the products that got updated withe new price, stock count, product ID etc.
I have my own worksheet with the product ID that we use, and I want to finde the exact match to my product ID in that CSV file and delete all other that don't match.
But i need them get deletede by rows thos product ID that dosen't match to my workbook.
I tried with this, so it could set an X in front of my match then i could filter and copy it to my workbook but it dosen't work:
Because the same product ID is sometime in 100 rows and the X come only in front of one of them.
=IF(ISNA(MATCH(Q2:Q1000;G$2:G$1000;0));"";"X")
so with some macro. I need to have every row deleted that don't match to my list of product ID.
View 5 Replies
View Related
Jan 30, 2008
I have 2 worksheets named sheet1 and need_to_delete that are in the same format: 7 digit number, 5 digit alpha numeric, text, dollar amount. I need to copy every row into sheet2 where there are no matches in the column A of the two source worksheets, and copy every row that does have a match in column A into sheet 3. I also need to keep the rows in their current order.
View 5 Replies
View Related
Oct 12, 2011
I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?
View 3 Replies
View Related
Aug 5, 2014
I'm trying to build an Index-Match formula to retrieve a number from a "data" sheet onto a "summary" sheet.
In example spreadsheet, I need to retrieve the stock price on a specific row from "data" sheet, and as an alternative, the most recent price.
View 6 Replies
View Related
Dec 7, 2006
Attached is a spreadsheet of 2 tables from B:1 to V:5
I need to shift either rows down if cells from column B do not match column M and vice versa.
How would it be possible to acheive results as shown in B:10 to V:15 through VBA.
View 8 Replies
View Related