I have built a macro, but want the sheet to select all the rows until you meet a empty row then stop pooling etc..
See below, i am just selecting the rows when I recorded the macro. I want to tell the Macro, pool all the rows starting from row 7 going down until you meet a empty row.
What should I do to tell the macro stop pooling once you meet a empty row?
Sub Macro2()
'
' Macro2 Macro
' Macro recorded 11/17/2008 by DHL User
'
'
Sheets("Air Freight Rates").Select
ActiveWindow.ScrollRow = 952
' Removed additional scrolling
Rows("7:2001").Select
I have written a macro to convert data from a report exported from Salesforce.com to a format that is acceptable for upload to our website. One of the necessary conversions is to convert values from a Boolean value to a Y/N value. I wrote a macro with a series of search-replace commands such as this:
Code: 'replace 0s and 1s in "Direct Billing" column with appropriate data Columns("R:R").Select Selection.Replace What:="0", Replacement:="N", LookAt:=xlPart, _ SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _ ReplaceFormat:=False This code generates a warning when no "0" values are found:
"Microsoft Office Excel cannot find any data to replace. Check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected sheet. Excel cannot replace data on a protected worksheet."
I have this nice formula (listed below) that I'm trying to use to get the employee names that belong to each manager. How ever using the first formula I only get the first name in each cell and using the second formula (associates is a define name for the range A1:A70) gives me name that do not belong the that manager....
I would like this formula to only pull names from the manager that is listed in the C column....
I have been trying to create a macro vba that will look at a specific row in the current sheet and if it sees a name I need to delete that row. But I am looking to also under stand what it is doing so I can use this script in other instances. I just bought some things off MrExcel's Store but i won't get this for a few days.
Macro that will look for #N/A in Col A and if found then msgbox returns the data in Col B, so as example shown below we can see there are 2 #N/A, so the msgbox should return "DAI.345, BBHT.WERFGT".
I have a set of data (time in minutes) below (fig 1) that I need to use if the total time between two entered times matches a coloms total. If it matches I want Excel to use the data in that colom to affect the data in another (fig 2) colom adding the times to each cell.
Looking at both figs. below I want Row B, Colom A in fig 2 to add Row A, Col A to Row A, Col A in fig 1 since both are the total of 19.
fig 1 Coloms A B C D Row A 5 5 6 6 Row B 5 6 6 8 Row C 4 5 6 7 Row D 5 4 4 5 Total 19 20 23 26
fig 2 Coloms A B C D Row A 1:00 2:00 3:11 4:01 Row B Row C Row E Row F 1:19 2:20 3:33 4:27 Row F-A= 19 20 23 26
I am looking for a function that will search a range like 101-199, 200-249, 250-299 and so on.... Say I have a list of numbers like 155, 179, and 210. How can I find out what range they belong to? I am kind of looking at SumIf's but I cant seem to get that to work.
1. Write a sub that captures the existing lists in two arrays and then creates three new arrays of::
a. Customers who purchased only last year,
b. Customers who purchased only this year, and
c. Customers who purchased in both years.
2. After these new arrays have been filled, write their contents in columns D, E and F of the worksheet Auto Merged Post Until 24 Hrs Passes;I do not know how to do part C.
I am trying to set up a spreadsheet in Excel 2003 that pulls data from a lot of different websites and formats it all for me. I have managed to do this with a few websites but there are two which I'm having problems with.
This is the table I am trying to get, but when I do a manual web query and select the table and click OK, it says that no data has been found.
I have a file that I want a code to look for certain data and when found move the row to another sheet. The code needs to look at the active sheet because the name of the sheet will be different everytime I use it. It will also need to create another sheet named 'Online' that these rows are moved to.
The code will need to look for data that begins with either OAP, MCP, CPP, F4P, VAP, VWP, ITP and MEP. These will be followed by numbers i.e MCP123456. Once these are found I need the entire row removed to the created sheet.
The columns that these numbers will be in will vary on each file I use it on so it needs to look at the entire sheet rather than specific columns.
Also any cell that has data that begins with either MH and JD followed by 6 numbers that row needs deleting completely.
DETERMINING ROW NUMBER FOR DATA FOUND WITH VLOOKUP IN VBA
I have a user form with a combobox (called STKCODE) that calls up a vlookup routine to search for this item in a named range on a worksheet and retrieve related data to display on the userform. All this works fine.
What I would like to know is how to easily determine the row number on the worksheet, representing the row the data is stored in, if thats at all possible....
I am trying to Loop Through a Folder Of Excel Workbooks and get required Info from one of the workbooks, back to my Master File.
I thought of "VLOOKUP" but I am not shore if it will work over Approx. 60 workbooks? if there is an other or better approach, I am open to all Ideas.
So far I have code to Open my Master and declare the criteria for the VLOOKUP with the help from:
Re: Run A Macro On All Files In A Directory -------------------------------------------------------------------------------- See also this page on how to loop through a folder Loop Through Folder Of Excel Workbooks _________________
I am now able to open all Files in the sub directory, now I need to know how to approach my problem of looking for and getting the Info back to my Master File with approx. 5000 entrys to look for?
I have a tab with different city names and then a a series of answers to a number of different questions, what I need to do is create a macro which looks a table on a different tab, and if column b matches any of the words in the table to then print that entire row of answers.
So if the information found in R1!M3:M21 is found in Results!B:B then print that row to sheet R1. If the information found in R2!M3:M22 is found in Results!B:B then print to sheet R2 etc.
This is the only other way I could describe it, however I don't think it can be done as a formula anyway (even though it is somewhat gibberish)
IF(ISNUMBER(SEARCH(R1!M3:M21,Results!B:B))print the row,move onto next row)
I am using excel excel 2007 in windows 7. I have a search button that works great, however, I want it to also highlight the cell green, when it finds what I am searching for. Here is the code below for the search button I have.
Private Sub CommandButton6_Click() Dim searchthis As String, Found As Range Me.Unprotect Password:="123" searchthis = InputBox("Type Number.", "Property Search") searchthis = searchthis & "*" Set Found = Range("A:A,e:e").Find(What:=searchthis, LookIn:=xlFormulas, LookAt:=xlWhole) If Not Found Is Nothing Then Found.Select Me.Protect Password:="123" End Sub
When I use VLOOKUP formula within a VBA routine ex: For LoopCounter = 1 to LastRow With Worksheets("0MATERIAL") .Cells(RowCounter, 5).FormulaR1C1 = "VLOOKUP(RC[-2],'0MAT_UNIT'!R1C1:R65520C12,4,FALSE)" End With RowCounter = RowCounter + 1 Next LoopCounter
How can I find out what row or cell address that the VLOOKUP found the data? The above code works perfectly but the problem is I need data from that same row in columns 4-11. I replicated the .Cells line above and made each one a VLOOKUP (for column 4, 5, 6, etc...) but this kills the performance. I have around 32,000 rows in sheet 0MATERIAL and around 50,000 rows within sheet 0MAT_UNIT
I have designed ad workbook with a lot of combobox. The cbo are partly controlling other cbo. The sheet works perfekt and in the code they are handled as intented. So no mispelling of any cbo or sheetname. Where I get my problem: If the workbook is open and I close Excel then I get the "Compiler error: Method or data member not found". But if I close only the workbook I don't get any Compiler error. It is as if the problem is caused by a Excel problem - If Excel is closed the sheet is recalculated but closed and there fore ends in compiler errors.
This error is in Excel 2000 + 2003 + 2007 - so not version related.
I have been searching the net for a solution for this problem but havenīt had any luck so fare. I starting to believe that there is no solution to this proboem.
This macro is part of the Pertmaster Risk Expert Application: It was not created by me nore modified by me, it is part of the PertMaster Risk Expert Software:
I am trying to run the Convert Lags To Tasks Macro Ver. 1.3 but i keep getting the following Error Message: Compile error: Method or Data member not found
Here is the list of the codes for the macro: I have not change any codes from the original pertmaster file....
I want to find the subtotal amount on one worksheet, which is two columns over from the text, "Sub Total:" on the same row. The subtotal line floats up and down each week. Once I can find the subtotal I want to populate another worksheet with the data.
I have been able to make a excel sheet which takes inputs from userform for First Name, Last Name, Address etc. I have included a duplicate check for column "B" for "First Name". This checks if any existing data is already which matches the new data input for "First Name" through userform.
The userform only checks for the "First Name" check as required and gives a message that duplicate has been found. Then I have to close the userform and do a Control Key+F ( to find the new name for example, James) in excel sheet and validate that new name is same or different from existing name "James". This I want to do since this new name "James" may be another "James" as his "Last Name" is different. So even though First Name is same, since Last Name is different I know they are two different persons. In that case I will add the entry manually in sheet, instead of userform, since I would not be able to input the new data for "James" since the duplicate check with the current code will not allow me to do so.
What I am current trying is -
1. If the new name say "James" is entered through userform, then excel should point me to the existing row where the record for existing name "James" is there, say row 4.
2. Now without closing userform I should be able to see in the background excel sheet the search results for "James", as excel is pointing to that now. There may be multiple "James" in the existing which should be pointed out.
3. Based on the results that I see in the background excel sheet I can now decide that, this new name "James" is different from old "James" (of row 4) since his Last Name is different. Accordingly excel code should then ask me to add this record or discard this new record.
4. Duplicate check for First Name is enough for me. I would not require "Last Name" duplicate check.
I hope I have been able to explain my problem. I have also attached my current code as I am not able to attach any sample test file.
I have two sheets with data. I wont excel to look for a value in colum A in sheet 2 the value to look for is defined in colum a in shet 1. If value is found it should insert in sheet one the value that is in the cell next to the found value. The data is not sorted. I have attempted and failed with using different functions.
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem ... .Fields.Item(1).value = activecell 'activecell value = "Joseph" If Not isempty(activecell.offset(0,1)) Then .Fields.Item(2).value = activecell.offset(0,1).value Else .Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works End If ... End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty ' or .Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
If Sheet6. Range("O8").Value = 4 Then For Each cell In Sheet10.Range("B5", "B369") If (cell.Value = Sheet6.Range("L24").Value) Then cell.Offset(0, Sheet6.Range("L21").Value).Value = Sheet1.ActiveCell.Value End If Next cell End If
it says the part of code causing the error is the end of the 'cell.offset' part, as highlighed: Sheet1.ActiveCell.Value. i tried replacing it with '.Selection', still get the same error.
I am attempting to create a macro to generate emails based on data in a sheet. The goal is to run the Macro, and have it generate emails to send to contractors letting them know what they are going to be paid. For instance:
Name in Column J Email in Column L Memo in Column N Balance in Column T Due Date in Column P Week Ending Date in Column H
Now what I would like to happen, is to tie a macro into a button that will create the email as follows:
To Field: Email address from Column L Subject: "Company Payment Remittance Payment Date *Date from Column P*" Body: Hello *Name from Column J*, For *WE Date in Column H* you will be paid *Balance from Column T* for the time worked of *Memo in Column N*
Now the tricky part is that I want the email to contain all line items for each email address. So instead of sending one email per line, have the macro automatically put all of the information that needs to be sent to one email address into the message. I don't know if that is possible, but it sure would make my life easier if it was.
I have attached a sample workbook of the data that will be used
I'd like to have a sheet with multiple columns of data (say A thru K for instance.). Id like to reserve column A for ONLY imputing an X. The rest of the columns b-K would have data in the cells. I'd like to have a macro that when it saw an X in column A, would copy all of the data in cells B-K in that row, paste it into the next empty row of a second sheet (for history tracking), then go back to the original sheet and continue looking for additional "X"'s and repeat. Once all of the X's were copied, it would "clear" (Not delete because some of the cells would have formulas in them that would need to remain for future use.) the cells based on the "X" then finally move all of the remaining data up to the empty rows to fill in the empty rows. This last piece would be more for esthetics to have a clean looking sheet.
