Formula / Macro To Get Info From Another Tab Using Given Table
Jun 26, 2014
I am looking for a formula or Macro if its the only way which does the following:
I have a set of locations in the below table which also has exactly the same name as a tab in the same workbook. So for example I have 1 tab called "summary" which contains the below table and than another tab called "London453" & another tab called "New York45" & another tab called "Paris3232" & last tab called "Vancouver43"
In the "Reconcilation needed" column I would like a forumula/macro to start in Cell B2 and look at the cell next to it in Location column [Cell A2] and then go to the corresponding tab in the workbook and if there is a value in cell G22 in that tab, than I would like the formula/macro to take the first 7 charactors of Location value otherwise put nothing.
Example :
in tab "London453" there was a value in cell G22 --> hence 7 charactors "London4" in below table
No value in Cell G22 in the "New York45" tab --> hence nothing in below table
Value in "Paris3232" tab in cell G22 -> hence "Paris32"
No value in "Vancouver43" tab -> hence nothing
Location
Reconcilation needed?
London453[CellA2]
London4 [Cell B2]
New York45
Paris3232
Paris32
Vancouver43
View 3 Replies
ADVERTISEMENT
Jul 29, 2009
I have a "Generate Table of Contents" button that launches a macro. This macro builds the Table of Contents, creates (3) columns (Patient Name, Date of Pickup, and Frequency), finds all of the sheets in the work book (already renamed to a patient's name), sorts them alphabetically, and lists them under the Patient Name column.
This code works great - The next challenge:
On each sheet (which corresponds to a patient in the database), there is a cell that is filled in that states which day the patient picks up their medication. There is another cell that designates how often they come to pick it up.
I am at a loss as to how to direct the macro to: For each sheet, go to the specific cell, and then report it in the table of contents.
It somehow needs to bind the information together... meaning the patient name, date of pickup, and frequency must be displayed correctly each and every time on the same row.
View 4 Replies
View Related
May 12, 2014
I would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies
View Related
Aug 22, 2014
I have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
View 1 Replies
View Related
May 13, 2007
With my limited knowledge I am having trouble constructing formula to break the following info that I receive frequently from my credit card company into 3 columns - Date, Details, Value
21 Apr 2007 SAINSBURYS PETROL BURPHAM £10.00
View 9 Replies
View Related
Nov 13, 2006
I need a formula that will take the value of one cell and put it in another cell other than the one in which I am typing the formula. I can't think of how to do this.
I have two columns, A & B (no headers), of information. The columns are not identical, and column B has empty cells scattered throughout the column. For each empty cell in column B, I want to copy the same row of information into it from column A, as if I'm just scooting the information in column A that's on the same row as the empty cells in column B.
This is simple with a cut/paste, but when there's thirty empty cells, cutting and pasting takes time. (What's really frustrating is that I've figured out a few formulas that will copy the information from column A but all the information gets pasted in the column in which I'm creating the formula (say, column F, for example). THAT doesn't help me because the empty cells in column b are still empty!)
View 9 Replies
View Related
May 29, 2007
I need to make a macro to get sales information from sheet one to sheet 2 in a different order with a few other things that need to be added in everything I need is in sheet 2.
Sheet 1 is what I work with and I need it to look like sheet 2 using a macro I wrote what I need in sheet 2A13-...
View 14 Replies
View Related
Feb 12, 2008
I'd like to build two macros that are slightly different but are both along the same lines.. The first one will take only certain columns of information from the "Master" sheet and dump them into the "Public" sheet. (I want only certain information to be seen by others). I.E. say I only want columns A, H, K, L from the master sheet to go in A, B, C, D in the Public sheet. I hope thats enough detail.
The other macro I want to build will take the A, B, C, D information from the Public worksheet and dump it all into another workbook called "Client Lists". The link to these two documents would be over a network so there shouldn't be any issue there... This way, all the people I work with can have this document and have up-to-date information on clients etc.ed...
View 9 Replies
View Related
Apr 2, 2009
There is a webcreated excel document that generates dates as the date of such as:
4/1/09 12:39:00 PM
I want to write a macro that will remove the date part and just leave the time. How would I write that? Times are in columns C and D and I want it to scan all the way down to row 600 and replace.
View 9 Replies
View Related
Mar 20, 2014
In column A I have Product Codes, They start at A3 and go down to A169.
I need to have a formula which i can drag across from CQ3 to DH3 which corresponds in the following manner.
CQ3 = A4
CR3 = A5
CS3 = A6
etc etc.
I then want to be able to copy the formula into another place, eg CQ20 = A21, CR20 = A22 etc
I have attached a screen shot.
Untitled-1000.jpg
View 3 Replies
View Related
Jul 29, 2014
I have a formula in column J that is the following:
=IF(I541="",IF(ISNUMBER(SEARCH(LEFT(G541,4)&"*"&RIGHT(G541,4),H541)),G541,""),"")
See screenshot:
I need to replace "G542" in the formula above. For example, in cell J541 shown above, I need it to output "1996-1999|2000-2001" instead of "1996-2001" I need the output to include LEFT(G541,4)&"*"&RIGHT(G541,4)
View 2 Replies
View Related
Apr 15, 2008
i have a list of names which also contain e mails addresses after the names, they are displayed as (In column B onmy spreedsheet)
Armani Stevens/GB/companyname/GB@soso
what i need from the above is just the name (up tp the first backslash)
so i would need Armani Stevens and disregard the rest.
What i would then need to do is to take the name and then see if the names is in the list which is situated in column A,
so to sum
once i have Armani Stevens extracted from Coulmn B i would want to see if this name is in Column A
Names are obviously of all different lengths and there is always a space after the first name and surname
View 9 Replies
View Related
Dec 31, 2008
I have a Date in Cell A1 Page 1 and I need a formula to put in Cell A2 on Page 1 that if there is a "matching" Date in any cell in Row B1-B7 of Page 2 that the data in the corresponding row C1-C7 on Page 2 will be placed back on Page 1 Cell A2.
View 9 Replies
View Related
Jun 26, 2006
I currently have an excel file set up which is refreshing imported data every minute from a server. This data is located on " sheet 1".
This data is the result of another system constantly monitoring (pulling data from) the process at my factory. It consists of temperatures, speeds and other settings.
When a temperature, speed or setting changes then it will be captured by the monitoring system and therefore my excel sheet will load it into the imported data within the next minute.
I would like to be able to capture the change in temperature, for example, if it goes into alarm and automatically send an email reporting this alarm. This alarm is captured in my imported data in a specific column with a 1. If it is out of alarm it is 0. There will not be a report of an item, at any one time, with both a 0 or 1... so there is only one case of any one monitored process.
I have a pivot table set up to filter all the uneeded data out and I currently refresh it manually to show the current status of all alarms. If an alarm occurs on the process, I can refresh my pivot table and it will be indicated with a 1 until it is refreshed again (and the alarm is gone).
So the question:
1. How can I refresh the pivot table automatically every x seconds?
2. How can I automatically send an email on the value change from 0 to 1 in case of an alarm?
View 3 Replies
View Related
May 28, 2009
my macro is set up to do the following in my book once the user inputs a row of information. the user will go to the opproperate sheet based customer and input all info.
the macro is run (ctrl+z)
the macro takes the last row in the active sheet, and pastes it into the last row of the "ALL" sheet. then it goes and sorts the sheet in order.
i want to adjust it so that the user will input the row of information into the last row of in the "ALL" sheet. then based on the given informaiton, paste the same row in both the corresponding customer and location sheets.
im assuming im going to need to use some variables?
attached is the test spreadsheet.
View 9 Replies
View Related
Nov 4, 2009
I need a macro to clear data on 2 worksheets that i can add to a button. lets say sheet1 B55:Y55 and sheet2 b102:y102
View 3 Replies
View Related
Nov 20, 2009
I have a template work book that has several worksheets with numerous formulas thorughout.
For example;
=SUMPRODUCT(--ISNUMBER(SEARCH("MCSH",P9:P218)),--ISNUMBER(SEARCH("HWD",G9:G218))).
When I set up another template for a different crew I manually have to go through the entire work book and change the crew identifier (MCSH) in every formula.
View 4 Replies
View Related
Jul 11, 2008
I have a userform which is designed to get and enter data into one worksheet.
When I call the userform up from a different worksheet it doesnt refer back to the data source worksheet?? How can I do this?
I have used
sheets("dataworksheet").activate
in the user form initialise event but this still doesnt work.
View 9 Replies
View Related
Mar 9, 2008
I would like for the result of a formula to stay in the cell even after the first cell changes.
in cell G1 I use this formula, if(C1=D10,A1,""), I would like result of formaula to remain in G1 even after C1 is changed.
View 10 Replies
View Related
Jan 29, 2014
I need a macro thaw sends a mail to a specific address (and CC) based on a critiria in a cell. This is the code I have. It does not send the mail.
[Code] .....
View 4 Replies
View Related
Jun 4, 2009
I have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows:
*CUSTOMER
*CONTACT
*MACHINE TYPE
*SERIAL NUMBER
*QUOTE NUMBER
*ORDER NUMBER
View 14 Replies
View Related
Apr 24, 2013
What the Macro has to do is this.
It takes an specific word from a certain number of files that you can choose from an add file window.
Then when you choose those files the macro starts to run every file and look for an specific word, in this case is "ROFO March 2013".
When it finds it, The macro creates a new workbook( You create the name of that workbook y the first place of the macro, when you choose the files that you want to look for that word).
So, When the macro finds the word ROFO March 2013, it copys all the columns that has that name, and keeps looking until the file ends.
And paste all that info in the new file, A consolidate File.
I have change all the names of variables of the macro so you can understand it.
Code:
Sub copy_data(ByVal Origin_File_route As String, ByVal destiny file As String)
Dim Origin_File As String, RsBusq As Range, ROFO As String
Dim Rango As Range, Fila As Long, lastrow as Long
origin_file = Dir(origin_file_route)
[Code] .......
View 2 Replies
View Related
Apr 17, 2014
I have a table like this:
1/2/14
2345
1/6/14
34665
1/7/14
5473457
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.
View 1 Replies
View Related
Jan 19, 2009
When I open my workbook I get a popup that says: Welcome Back...
Using a module with the following
Sub auto_open()
MsgBox "Welcome Back..."
End Sub
I want to have it say: Welcome Back, Phixtit
Where "Phixtit" comes from the cell "C15" on my "INFO" sheet.
Example:
='INFO'!$C$15
View 9 Replies
View Related
Nov 13, 2009
I am comfortable with getting a macro to copy & paste where I need it to, however how to get the macro to recognise when a certain value has stopped.
For example in Column B on "DataDrop" are all the divisions that exist in my company i.e East Anglia, Essex, London etc. There is an empty row between each division.
View 4 Replies
View Related
Sep 6, 2008
At job, Mac OSX and Address Book 4.0.6 with contact info including in many cases emails. I'd like to get it of there, into Excel to manipulate, and ultimately into a FileWrecker Pro database. How to export 1087 entries from Address Book including only selective data fields is the question, and I know that's "slightly" OT, but I do want to import into Excel, so I hope that vindicates me! If not, and you can point me to a good MacForum, I'll settle.
View 9 Replies
View Related
Nov 16, 2009
I have a small data set (ends up with 8 columns, up to 1000 rows), that gets imported sorted and formated via a macro linked to a button. I need to be able to look at one particular column of info, which will contain different text values every time the data is updated, and create a list of all the different values that occur in that column (maybe 10 max). Then...... I need to calculate a numerical value from adjascent column, linked to the text values from the first process. Below is an example to better explain:............
View 2 Replies
View Related
Dec 6, 2013
Had 2003 now 2013. Trying to get the macro to select different printers for different doccuments. 2013 macro recorder does not record any printer info or path, all printers show the same wording just application print...
How can I get the recorder to acurrately record and diferentiate printers?
View 2 Replies
View Related
Jun 4, 2014
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData()
For Each cell In Range("A1:A1") ' Where to look for the date
If cell.Value = "AIM Land Services Ltd." Then ' The date
Range("A5:O350").Select ' What is the range to copy
Selection.Copy ' Copy it
Sheets("Invoice_Log").Select ' Select the Sheet it applies to
Range("A5").Select ' Where to paste the data
[Code] .........
View 1 Replies
View Related
May 13, 2013
I have a table below that looks like this:
LOC
# of days
DTX
3
RTC
3
PHP
12
IOP
12
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1
DTX
$ 1,292.00
2
DTX
$ 1,292.00
3
DTX
$ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
View 7 Replies
View Related
