Why does my macro mess up on second line C23 and not places Play Equipment or the amount in the right column it stays on row C22
[URL]....
Code:
Private Sub CommandButton1_Click()
Dim SheetName As String
SheetName = "Estimate1"
SheetName = InputBox("enter the name of a sheet to use", "sheet name", SheetName)
[Code]....
Data file with few columns. There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
See here Fill Cells.xlsx
I created a macro that analyzes some datasets and according to different parameters it puts an X at the side of every cell that goes out of parameters. These Xs are all in columns named the same way for it to be easier to find. What I want to do is to write some macro that will hide every row where the data did not go out of parameters to be able to easily see where it did. In the following example it would need to hide the second row since there are no Xs in that row. One of the problems I'm having is that the amount of columns and rows is variable.
Data
Data
Functional Upset
Data
Data
Functional Upset
#
#
X
#
#
[Code] .......
Below is the piece of code that I created to try to do this (G has the value for the amount of rows). I think it is working but it is either taking too long since it has to sometimes go through over 20k lines as much times as it needs to to cover all the rows that contain Xs or its getting stuck for some reason.
Code:
Worksheets(2).Range("I3:I" & G).EntireRow.Hidden = True
K = 0
Do Until Worksheets(2).Range("I1").Offset(0, K) = ""
If Worksheets(2).Range("I1").Offset(0, K) = "Functional Upset" Then
[Code] ......
I need to take a list of about 1,500 rows of data (single column) and convert it into columns of 9 entries. I know that I can select nine rows and then paste using transpose... But any way of "automating" the process?
So
1
2
3
4
5
6
7
8
9
ETC
ETC
becomes 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 etc....
Im using this formula in a spreedsheet =(B$3*0,5)+(B$3+(B$4*0,5))+(B$3+B$4+(B$5*0,5))+(B$3+B$4+B$5+(B$6*0,5))+(SUM(B$7:B$28)*4)
What i want is to be able to drag this down for multiple rows but i want the formula above to only change columns i.e.
Next row gets C$3 and so on.
So, I have a document 25 pages long. It has 26 sections (1-26) and each section has up to 10 (.1 - .10) sub sections which contain 16 (a-p) sub-sub-sections. There are 6 columns of varying widths. Some cells, in a row, merge into adjacent cells.
I would like to break this document into 26 documents - one for each section - so that I may recombine and regroup them in the future incorporating a few modifications. Whenever I copy and paste to a new Workbook, I loose the formatting of column widths. Resetting these alone takes lots of time.
I have come up with is to duplicate the entire document and delete everything above and below the section I would like to save. Then repeat for next section. There's got to be a better way?
If I have formulas in A1, A5, A19, and A36, highlight them with goto, how do I move them into B1, B5, B19, and B36? Copying and pasting puts them in B1, B2, B3, and B4.
View 9 Replies View RelatedI need a macro that will combine/consolidate rows when cells from 2 separate columns match. example...
beginning:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 1064 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 80 unleaded 1101 100100
row 4 Seminole 30 dyed dsl 3421 100100
This is what I need the macro to do:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 2165 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 30 dyed dsl 3421 100100
I am trying to fill in reference cells horizontally but fix the column and increasing the row number as it fills. For examples I want to start my refence as "=A1" in cell B1. I want to copy this reference horizontally to column Z1 but want the refences to be A1, A2,...,A26. Excel only seems to increase columns when filling horizontally and rows when filling vertically. Transpose works but it's an array which would slow the spreadsheet down.
View 4 Replies View RelatedI need something that will take data from columns in one Spreadsheet and put in difference cells in a row. I know this could be done with recording a macro but the number of column will never be constant.
Below I attached examples of the Spreadsheet
Financials SpreadSheet
Need to have the data in column B to F put their respective cells in row in the
Master Spreadsheet
So we would have 5 rows.
Excel 2010ABCDEFGH5Job Number17542000250030003500Total6Date Booked01-Mar-1215-Mar-1215-Mar-1223-Mar-1223-Mar-127SalespersonJames ThorntonHoward StandenHoward StandenIan BullimoreSylvia Walton8AdvertiserNestleTalkTalkLloyds BankSkodaHonda9ProductNature ValleyBroadbandMortgageApril
[Code]....
I have 2 tabs (tab 1 is "Data", tab 2 is "Compare")
Data tab is filled with results from tests I do in a lab, each test has its own row, each 'test subject' has its own column.
In the second tab I want to have the ability to pick from a drop down list one of the other columns from the first tab.
So I have 2 columns (D and F) in tab 2 with drop down lists that I have populated with the names of the test subjects (using data validation grabbing the top row in tab 1).
I have formulas set up in Column E of tab 2 for the actual comparison.. What I'd like to do is when I select a test subject (for example SubjectA), from the drop down list in $D$1.. I want to populate $D$3:$D$155 with rows 3-155 of the matching column in tab 1 (so if for example SubjectA is in column X, it would copy from tab 1 X3:X155 to tab 2 D3:D155.
So so far I have the validation part done with the drop down list.. and I have the following VB code for tab 2.
I have a basic question for a macro, I've looked at other threads but they all seem to have some kind of twist to it. All I want is a macro that copies columns A&B from a source workbook to my destination workbook in a specific worksheet for column A&B too. I'm assuming that the destination worksheet will automatically update whenever the source workbook is updated? My source workbook is called Job List 7 and the worksheet is called Master Job List, my destination is Ted's Timesheet and the sheet is called Job List.
View 10 Replies View RelatedMacro written below gathers information from the source xls documents (which are located at "D:anetdata" ) and copy a new file ( located at "D:anet arih" ) according to different contents of two cells. Unfortunately macro copies solely Column A. But I want to copy entire rows between those cells. For example, if A400 contains "Days with most messages" and A500 contains "Subjects with most answers" , this macro copies cells between A401 and A499. But I want to copy entire rows between 401 and 499.
Sub EvrenYurdakuloglu()
Dim DosyaDuzeni As Variant
Dim GuncelSayfaAdi As String
Dim Hucre As Range
Dim ikinciAranan As String
Dim ilkAranan As String
Dim ilkDosya As Variant
Dim ilkSatir As Long
Dim islemAdedi As Long
Dim i As Long
Dim KlasorunYolu As Variant
Dim KlasorYolundakiDosyalar As Variant..................
I have a sheet made into a form with some check boxes included. If I select all the relevant columns, create a new sheet, and paste into cell A1 - all of the information carries over just fine. You can still select cells and check the boxes in the new sheet.
However, when I record this action as a macro, using the macro produces a picture of the selected columns instead of actually copy/pasting the information. I can't click on the cells or check boxes. I can only move the picture around within the new sheet.
I'm trying to copy multiple rows with a macro. Below code lets me duplicate one row at the time and the duplicate is inserted just below the chosen row.
View 2 Replies View RelatedI'm trying to create a macro that examines a sheet of data, and if the data in a certain column (column P) contains either A,B, or C then it would copy the entire row over to another sheet. If it contained a blank or D,E, F, etc,etc then it would just ignore that and move to the next row.
I have no idea where to start, i've searched google and here on Mr.Excel.
http://www.excelforum.com/excel-programming/651452-copy-rows-of-data-into-a-different-format.html
Here is the problem:
I have a list of activities (each activity is one row of data). These will be input manually into Sheet2. (see attached file)
The activities then need to be automatically copied and pasted into Sheet1. However, the data is displayed in a different order than in sheet1. So I need some code which will run through a loop for each row of data and then copy and paste it into sheet1 until it reaches an empty row.
The cell positioning of each data set in sheet1 is equally spaced. VLOOKUP will not work for me here as I do not want any formulae or VBA script in sheet1. I cannot change the format of sheet1 as it is a company form.
I was tired of making my list smaller to upload it here, so I uploaded the complete thing on megaupload :P Here is the link:
http://www.megaupload.com/?d=1W6PBADE
On the bottom of the list is a button; "Add New Anime". When you click on that you get a UserForm where you can enter; Title, Type, Total Episodes, D/L Eps and Watched Episodes. When you press ''Add Anime" the entered values are entered at the bottom of the list, underneath the corresponding list names on the top.
Now there are 4 list names left (Left, Status, Status 2, and Progress (%)) I still have to make a option to enter Status 2 as well in the UserForm.
Now the question:
In columns F (Left), H (Status) and I (Progress (%)) are formulas. How can I copy those formulas automatically when I add something new with the UserForm? And can it automatically insert a new row, since I have to move the buttons down with every new title.
I have a worksheet "parent child" with product data, cells F4 and BK4, pull pertinent data from cells T2 and M2 respectively on a different sheet "products".
A5:A196, D5:D196, F5:F196 is dependent on cell F4 and BK5:BK196 is dependent on BK4.
Once we get to row 197, the cycle starts over again. F197 and BK197 needs to equal products!T3 and products!M3. Then rows 198 through 389 will be dependent on row 197.
I basically need this to repeat perpetually for about 1000 different products on the products sheet, thus the ability to create approximately 193,000 rows.
I am not sure what it will take to do this, i am fine if I have to drag and copy all rows, which I have tried to create and failed at, I end up with products! T196, instead of T4.
i have a certain column that tells me if a client has withdrawn from the company, and the column just says "y" or "n" i want excel to automatically copy the whole row to another sheet if that cell is a "y" for yes the client withdrew...
View 9 Replies View RelatedI would like to copy a range of cells with a marcro, for example copying range C3:C15 over to D3:D15 and when I run the macro again I want range D3:D15 to copy to E3:E15 and from there to copy E3:E15 to F3:F15. I want to keep that going to the next and the next with the same macro. But it just keeps copying the the original range which I recorded in the macro, but I want it to keep going. If somebody can help me with that, I would sure appreciate hearing from you.
View 8 Replies View RelatedI am using MS Excel 2007 and I am trying to create a macro which will copy column E and paste the data in column E to the bottom of column D. However each week the amount of rows in these column with vary, they will always be the same amount of rows in column E as in column D but there may be 20 rows one week and a 100 rows the next.
The formula I currently have is below but this will only work for a specified number of rows. How I could change this to work for any number of rows?
Code:
Sub IPT()
'
' IPT Macro
'
'
Range("E1").Select
[Code] .....
I have a spread sheet where you fill in an order, so customer name, item being purchased, quantity and price. I now need a macro that will copy that info over into an invoice.
If the customer is only buying one item, that would be straight forward, as it could just copy that info across, but if the customer buys two items, the macro needs to see that there is more data to copy, then insert a new row on the invoice and copy the details of the other item.
I browsed through the other posts concerning copying and couldn't find (or maybe I didn't just understand) how to do what I want. I looking for a macro for a comand button that when pressed copies certain cells in the active row to another sheet. I recorded a macro for what I wanted to do ( to make the explenation easier) for one row but even the recorded macro refuses to work.
I'll put the recorded macro here if it helps someone, but as I said even that doen't work
Private Sub Kopiering_Click()
Range("E3").Select
Selection.Copy
Sheets("TOTAL").Select
Range("K3").Select
ActiveSheet.Paste
Sheets("BRL Newbuilding").Select
Range("D3").Select
Application.CutCopyMode = False
Selection.Copy
I've got a problem with copying cells from table A to B.
A short insight of the situation:
Table A shows: ITEM_1 = 3, consequently ITEM_1 from table A is copied to table B for 3 times.
I've got a few huge information blocks to handle (up to 5000 items) obviously it's unreasonable to do this manually.
I've added an xlsx file with more detailed description.
Example_WHS.xlsx
I have this in Column A, with about 120 entries:
Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1
Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2
Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
I've attached a sample workbook in which there are 3 macro-buttons.
The buttons will paste a shape in the active cell. So this means the buttons themselves could be deleted and replaced with a shape.
Since locking and then protecting the cells disables the macros, how can I amend the code to make sure the buttons' cells are protected from the copying and pasting macros? Or, how do I ensure that the macros only work in A1 - E5?
I need to search column C for the text "X". If an "X" is found, I need to copy the text from the cell directly left of it and paste it into a seperate worksheet into cell B2, then go back to the original worksheet and delete the cell with "X" on it and the cell to the left.
View 9 Replies View RelatedI have a spreadsheet that allows users to paste set data from a PDF Image (using OCR) straight into Excel and then use the MID function to split the data accordingly.
Unfortunately, the OCR isn’t too intuitive and gets it wrong sometimes.
So to counter this, in another sheet (in the same workbook) I have a manual input section, and a simple macro button that pastes this data into the same fields where the OCR text would be, so that the main sheet works exactly the same way as before.
The problem is, and most likely due to the simplicity of the sheet, if a combination of OCR pasting and manual inputting is used, when I hit the paste button, it over rides the OCR data with blank cells
In the link below I have shown what is currently happening (1, 2, 3), and an example of what I would actually like it to do (4, 5, 6).
Example - Online Spreadsheets - EditGrid
So, in the 2nd scenario, I would like “5” to recognise that the respective cells in “4” already contain data and fill them ‘Grey’. This I have already achieved with basic conditional formatting.
However, I need to take it 1 step further and say that if the parent sheets cell (Auto OCR) contains data, as well as filling cells (in sheet Manual) lock these cells off and prevent the end user from adding data and/ or being copied over to the parent sheet.
Is this possible?
The result then being the parent sheet with both OCR text and copied text from the manual input sheet.
Both sheets are protected anyway and only allow for user input in certain areas, so is it even possible to apply further protection once the sheet is locked already?
I'm using the following code, which I figured out quite by accident out of happy coincidence that somebody else on here asked about selecting only visible rows:
View 4 Replies View Related