Macro For Inserting/overwriting Values From One Table To Another
Mar 30, 2007
I have a problem with a certain tool that i've been trying to develop.
I have two sheets in my workbook. In the first one i choose a value from a list (in cell A2). After the value in the list is chosen, certain integers for that value appear in the right columns. (with blanks between them)
Next, I will press a button called "calculate" which works like this: If A2 can be found in Sheet 2 Column "Value" then the macro overwrites the integers found at the right of the A2 from those found in Sheet1.
If Sheet1(A2) is not found in the Column "value" then a new line is inserted at the end of the table like this.
A 1 3 6
Pls help me with this, I have a very close deadline and I don't think I can pull this off by myself in such little time.
View 9 Replies
ADVERTISEMENT
Mar 14, 2013
I have 2 sheets similar to below :
Sheet1
apple pc
sony camera
lenovotablet
apple laptop
Sheet2
sony television
lenovopc
I need to compare Column A from Sheet2 with Sheet1 and where the values match, only replace THOSE values in Column B of Sheet1 with those in Column B of Sheet2. Hence, after the replacement, Sheet1 should look like (value for apple remains unchanged).
apple pc
sony television
lenovopc
apple laptop
What would be a formula that would do it ?
View 1 Replies
View Related
Jan 24, 2012
I will copy a report into sheet 1, starting in the same place(A1), on a weekly basis. The headers are: Item, Quantity & Price
Week 1's report shows the following:
Windows 5 $1.00
Doors 6 $1.50
Chairs 7 $2.00
Week 2's report shows the following:
Windows 3 $1.00 (change in quantity)
Tables 7 $5.00 (new item)
Chairs 7 $2.50 (change in price)
I need to have a rolling, unique list on Sheet 2 that will do the following:
- add new line items
- keep old line items while checking to see if the quantity or price has changed.
Therefore, after week 2's report is pasted on sheet 1, Sheet 2 should look like this:
Windows 3 $1.00
Doors 6 $1.50
Chairs 7 $2.50
Tables 7 $5.00
Here's the most important part: There will be formulas in Column D in Sheet 2 that I need to stay with each item. generating the desired result on Sheet 2!
View 9 Replies
View Related
Feb 17, 2014
I have a worksheet that has macro events attached to command buttons. When a ‘Start’ command button is clicked, a timer begins counting in seconds and displays the value in cell B3 until a ‘Stop’ command button is clicked. The event works flawlessly as long as I don’t open up another workbook (to continue working in Excel).
When the second workbook is open…then time stops working in the workbook where the macro was created…and starts displaying the ‘timer count in seconds’ in the new active workbook--which overwrites/destroys the data in the newly opened workbook. When I go back to the original book that called the macro…it continues counting again.
I need this timer to continue running in the workbook with the command buttons (in the background) while I work on other worksheets in other books. Is there a way to keep the timer running no matter how many other workbooks are opened and prevent it from overwriting whatever sheet is active? This code in the Increment Sub below ‘overwrites’ the contents of cell B3 on whatever sheet is active---and stops the timer in the on the sheet with the ‘Start’ command button.
View 1 Replies
View Related
Sep 5, 2013
- Construct a macro to import a csv-file to my worksheet named "Info". The data in the .csv-file should start in row A5 in my worksheet.
- If the worksheet "Info" already has data, I want to overwrite the existing data with the new data starting in row A5
The directory of the csv-file is C:Testmycsvfile.csv
View 3 Replies
View Related
Sep 19, 2012
I have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB:
Sub CopyRow()
Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0)
End Sub
View 9 Replies
View Related
May 7, 2013
I want to set up a table that automatically adds rows, ideally to the top... The way I was guessing to do it would be to alter rows in the table to have a variable... My variable is 'acctstotal' anyway I figured there would be a way to edit the rows to acctstotal+ 1 or somthing along those lines but I havent been able to figure it out
btw acctstotal is a variable that simply counts the number of nonblank lines that are in the first column of the table which tells me the total number of accounts
View 3 Replies
View Related
Sep 11, 2009
I need to have a cell (Total) but I need to be able to enter the information which all the subtotals are inputted into that area and will be the subtotals of the total. I have two areas that I will need to keep a running total of for each job #.
I'm not sure how to find out how to do this as I'm not that advanced with excel.
View 5 Replies
View Related
Jun 29, 2012
How can I insert a pivot table in excel 2007 into a new workbook so that it always references the original data file?
View 1 Replies
View Related
Apr 4, 2014
way to insert multiple table rows (not entire rows) at once without having to make a loop? Let's say I want to insert 3 blank rows into my table at row 5. The way to accomplish this with a loop would be:
Code:
For x = 1 To 3
ActiveSheet.ListObjects("Table1").ListRows.Add (5)
Next x
Was wondering if there is a more simple way to do this (maybe even a one liner?)
View 1 Replies
View Related
Jul 26, 2006
I have a pivot table that picks up the month an invoice was generated. Since I have several invoices for a few months in 2005, I would like to sum all the 2005 invoices into one column. I have the impression that I can insert a field within a Pivot table to sum all the amounts related to 2005.
View 3 Replies
View Related
Apr 19, 2006
I have made spreadsheet that calculates my total cost of making ice cream mix based on ingredient costs of two variables (Van_Gal, and Choc_Gal), for example 550 gallons and 750 gallons respectively. The worksheet calculates the total cost of making the Vanilla Gallons and the Chocolate Gallons. I’m not a VBA or Macro wiz, and now I’d like to Make a macro that will allow me to make a “table” of calculated costs associated with different assumed Vani_Gal and Choc_Gal amounts and then print the values; and then go down a row and print the cost of another amount of Vani_Gal and Choc_Gals until some preset end has been reached. For example:
Van_Gal; Choc_Gal;TOTOutput;avg cost
550; 750; 1300; $4,000.00; $3.08
600; 700; 1300; $4,250.00; $3.27
Let’s say that I want to know what the tot cost and avg cost per gallon for various combinations of Vanilla and Chocolate Mix from 550 V and 750 Choc for various combos and have it increase in iterations of 10 Gallons (i.e. 560 Van and 740 Choc); Maybe I'd use a " loop" that repeats calculations and prints them for different combinations of Van/choc until 800 Gals Van and 500 gal Choc. Once I have a table of values, I could sort it and find an optimal production level (with the Minimum avg cost). how to make a macro that can crank out a table like this?
View 4 Replies
View Related
Feb 7, 2014
I just discovered forms in excel and loving what custom functionality you can create with it; however, I need to include a table into the form but I've come to a road block. I don't see a way possible to render data from a query into a table inside of a form.
PS - I'm using Excel 2013
View 1 Replies
View Related
Aug 27, 2008
inserting a formula in PIVOT table field....
View 9 Replies
View Related
Jul 15, 2014
I'm trying to find a macro that will report how many values are returned in a pivot table. For example, if there is 5 values returned, I want it to return the value "5" in a cell If there are 10 values returned from the pivot table, I want to return the value "10" in a cell
View 1 Replies
View Related
Mar 15, 2013
I am trying to insert a blank row into a table (created using the table function in Excel 2010) without the copying the formulas. Every time I insert a row the the formula is copied.
View 3 Replies
View Related
Mar 17, 2009
I need to replace the values in the braces with the values in Column A. Is there an easy way to do this or am I stuck with doing each one manually? There are 92 lines in Column A.....
View 9 Replies
View Related
May 7, 2009
I'm Working on a sign-in sheet for the employees at my office...
I'm looking for a way to insert the current time as a value without having to copy and paste special (values).
View 9 Replies
View Related
Feb 16, 2007
how to insert the value of a single cell into a text box... is it possible to insert a range of cells into a text box, and keep the same formatting, spacing, control boxes etc?
Reason behind this:
I have some information in a range of cells, let's say A10:D20 and I want to have a nice fill colour for that range... my thoughts were to copy this data into a text box, and use the fill properties to make it look pretty. but I've found that I can't do that..
My next attempt was to set the transparency of the text box to 100%, put some fill in it with a nice orange colour, and place the text box over the cells I wanted to look pretty... When I did this, it worked ok for the cells in the lighter portion of the colour, but when the colour became darker it would block the cell data underneath it...
View 3 Replies
View Related
May 14, 2007
I'm running in to some problems on creating a Userform. I will try to explain it as best as possible. Right now I have a userform set up with 2 ComboBoxes. Here is my current code. It's not near complete.
Private Sub CommandButton1_Click()
Set ufStart = Worksheets("Data"). Range("AP4")
Set valNames = Worksheets("MasterData").Range("AA6")
Set valMonths = Worksheets("MasterData").Range("H3")
Set SelMonth = ComboBox2.ListIndex
Set SelName = ComboBox1.ListIndex
If TextBox1.Value > 0 Then
ufStart.Offset(SelName, SelMonth).Value = TextBox1
Else: End If
End Sub
The way it's supposed to go, is if TextBox1.Value is greater then 0... then go to UfStart and Offset by Row, which is ComboBox1 Selection Index Value and by Column, which is ComboBox2 Selection Index Value. I can't get the sub to get past Set SelMonth = ComboBox2.ListIndex.
View 6 Replies
View Related
Feb 24, 2014
Month Pay Tax Socia sec.tax
Jan 10000 2000 2999
Feb 15000 3499 3333
March 3455 222 333
I have an excel document with sheets representing employees and within the sheets it shows wages taxes nd social security tax for each month.
I want to create word documents for each month which inserts all the values for that particular month, aswell as the name of the employee into th word document. How to do this?
View 1 Replies
View Related
Apr 12, 2007
We have a scenario like this:
1. Data (Let's say 5 fruit names are entered) will be entered in sheet1 (row wise)
2. Data (Let's say 5 flowers names are entered) will be entered in sheet2 (row wise)
2. Entered data in sheet1 and sheet2 should get automatically populated in sheet3 under respective headers (header 1 - fruits and header 2 - flowers)
Rules : 1. We will have Headers with one default empty row
2. With addition of every row in sheet1 or sheet2, a row should automatically inserted in sheet3 under respective headers and populate data.
View 6 Replies
View Related
Jul 24, 2008
I'd like help writing a single formula that assigns either a numerical 1 or 0 to a cell based on values from two other cells.
By way of background, I'm working with three columns. Cells in column F contains values from 1 to 4. Cells in column G contain values from 5 to 11. Cells in column H are currently blank.
I need a single formula that will insert either a numerical 1 or a 0 into column H according to the following conditions.If F3 = 1 and G3 = 5 or 6 or 7 then let H3=1 otherwise let H3=0
If F3 = 2 and G3 = 7 or 8 or 9 then let H3=1 otherwise let H3=0
If F3 = 3 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0
If F3 = 4 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0
View 11 Replies
View Related
Nov 1, 2013
I'm Trying to change the value of a row when a determine condition happens, and I was thinking of doing it after the insert was made, but maybe it's easier before the insert (?) The thing is i've tried both, and i'm doing it wrong because it's not working
Code:
With ThisWorkbook.Worksheets("Site Configuration List")
.Range("A").EntireRow.Offset(1, 0).Insert
' Tried this .Range("A").EntireRow.Interior.Color = 49407
[Code].....
Obviously not at the same time, but no of those work. The call to the sub where the code above is implemented, is inside a loop, however, with each one of the things I've tried, when it gets to the line the program just stops. No error or anything.
View 7 Replies
View Related
Oct 13, 2006
I am working on formatting a spreadsheet report where the values will change in column A. Here is what I would like to do via a Macro. Compare the cells in column A (e.g., compare A2 to A3, compare A3 to A4, and so on). If the values between the two cells in column A are different, insert three blank rows and set the active cell to the next cell following the blank lines. Example:
if cell A5 is different from A6, insert three blank rows below row 5 and new active cell is now A9 and the comparison would start again. I have been trying to code the macro for this but with no success. Here is the macro I have been working on.
Sub Macro1()
Const NumRow As Integer = 3
Dim StartCell As Range
Dim RowNR, NewCnt As Long
Dim RowCount As Long
Dim Count As Long
Dim intRow As Integer
Dim bFmtComplete As Boolean
RowCount = Application.WorksheetFunction.CountA _
(Range("A1", Range("A" & Rows.Count).End(xlUp)))
bFmtComplete = False
RowNR = 2
Range("A1:J1").Select
' Rows("1:1").Select
Selection.Copy................
View 4 Replies
View Related
Mar 16, 2009
I'm wanting to add a button on the last row of a worksheet to "add rows" above the buttion (entire row). I have some cells (6 total) that have a formula that needs to carry over to the newly created rows. Some cells remain blank but some cells need to have the formulas fill down to the new rows (i.e.: =sum(a2+1), =sum(a3+1)...
Is it possible to give option of choosing how many rows someone wants to insert?
Help in creating the button, option to choose # of rows and the macro to insert those rows.
View 12 Replies
View Related
Feb 5, 2007
cell A3 contains a drop down list of student names.
say, William is the 1st student listed on cell A1.
when William is selected his math grade shows up on cell B3 & his English grade on cell C3
I figured out how to make cells B3 & C3 change according to selected student from cell A3. All data comes from the Database Table, which is locked/unedittable.
Here is how my sheet looks like ....
View 14 Replies
View Related
Mar 5, 2012
Is it possible to insert for example Private sub Workbook_open() into This workbook by executing macro?
View 8 Replies
View Related
Oct 17, 2012
I have recorded a basic macro that allows me to copy a formulas in cells CF11 to CH11, and it pastes it into cells in columns CJ to CL. Copy of code is below if you need it.
The issue I have is that I need to insert new coumns into the worksheet, and I need to copy the formulas from columns CF to CH, and they will now need to pasted to columns CN to CP. Note that this is a monthly report where we keep the prior months, so each month will need to add new columns. There are 8 tabs in the workbook, and they all use the same macro, just over different rows (columns all line up).
Is there a way that I can get the macro to paste into the correct column without me having to adjust the macro each time?
Copy of code is as follows:
Range("CF11:CH11").Select
Selection.Copy
Range("CJ11").Select
Selection.PasteSpecial Paste:=xlPasteFormulas, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Range("CJ20:CL20").Select
Selection.PasteSpecial Paste:=xlPasteFormulas, Operation:=xlNone, _
[code].....
View 5 Replies
View Related
Dec 22, 2006
simple little procedure to insert columns on two sheets and call each by the same name. Macro runs off a command button and inserts a column at E:E and gives the user an input box with which to name the inserted columns.
Code: ...
View 9 Replies
View Related
