To get cell to display results of formula I must edit (F2) and hit enter. Is there an easy way to do this in bulk rather than editing and hitting enter on hundreds of cells?
Example of formula:
=IF(COUNTBLANK(K2)=1,"",CONCATENATE("*** ",K1,": ",K2," "))
I have a range that has formulas that are based on other fcells outside the range.
What I want to do is, if the cell has a value to remove the formula and paste the results. If the filed is blank (no results from the formula) to leave the formula in place.
There could be a marco to run when this process is needed.
example attached
Just yesterday when I opened my excel file, all the cells that contains formulas does not display the results (leaving the cell blank).
For example the formula for cell A1 is =B5. But after putting a value in cell B5, cell A1 is still blank.
I would like to create a user form that will display the results from a lookup formula. The userform would have 2 textboxes, so from the formula below BZ109 would be textbox1 and CA109 textbox2. Once data is entered in these textboxes you would hit submit to return the results in a message box. What would the code be for the sumbit button?
=VLOOKUP(BZ109, INDIRECT(CA109), 11, 0)
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies View RelatedI have a long list (>1000) of increasing temperatures in column A. I use an array formula, {=MAX(A3:A1029-A2:A1028)} to find the largest change between two successive values. What I need to do then is obtain the two values that give rise to that difference (for instance, they might be in A678 and A679). I can't figure out a formula for this.
I can manage it if I insert a "difference" column in B, and use:
=INDEX($A$2:$B$1029,MATCH(MAX($B$2:$B$1029),$B$2:$B$1029,0)-1,1)
=INDEX($A$2:$B$1029,MATCH(MAX($B$2:$B$1029),$B$2:$B$1029,0),1)
but I'd rather keep the number of columns to a minimum.
So basically I have a spreadsheet that tracks if a patient has turned in there required paperwork within the last 6 months and then changes the cell to white and lets me know how many days they have left until they are due to turn this paperwork in again. Then if it has expired I have a condition format change the cell to Red but I would like to add in the text EXPIRED to the cell. lastly I have Cells that have no data in them gray and I would like to add in red text saying No Paperwork.
I'm hoping this will be my last build of this spreadsheet so I can go ahead and start applying it to the real workbook [URL]
I am trying to find a formula that will allow me to reference another page in my spread sheet. In my scenario the row I am referencing has 5 consectutive numbers after the reference point I would use for a vlookup. These numbers are all zeros except for one number in each row which will be a positive number greater than zero. I want my formula to check the first cell in the row, if it is not a zero it will show that number, but if this cell contains 0, then it moves over to the next cell. If all the cells in the row have a zero, then i just want zero to appear on my summary sheet. I tried to do a vlookup with an IF function, but I couldn't get it to work. I have attached a sample of what the spreadsheet looks like.Example doc.xlsx
View 2 Replies View RelatedI've got an If statement in Excel which features several VLookups - I need the IF statement to return differing results to 2 different cells, is this possible?
In plain English, I'm looking for something like
If(Vlookup(A2, B2:D5, 4, False), C6="y" And D7="ok", "False")
Obviously this is a very crude example
I encountered problem for some excel files when typing a formula but
displayed a formula instead of its calculated values, e.g.
when I entered "=100 + 100", what I exepected is to display as "200", but it
was displayed as "=100 + 100" instead.
I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.
So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.
I am trying to use a combination of Concatenate and IF formula to produce an email.
My input.
D4: First Name:
D5: Middle Name:
D6: Last Name:
D8: Organization:
Once all these are filled, I want the formula to produce a result like
FirstName.M.LastName@Organization.com
I have used the following formula.
[Code] .....
Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.
FirstName..LastName@Organization.com
How do I remove the additional (.) in cases where there is no middle name.
Attached File : Email Generator.xlsx
I have attached a spreadsheet that is causing me difficulty. I currently have a formula that is displaying in V3 the highest grade when it looks up the data in A3,H3 & O3. Then this is repeated for W3 when the data is looked up in B3, I3 & P3 etc etc... BUT
I need the formula to work if only block one is complete i.e. (1 Explore grade, 1 Plan Grade, 1 Make Grade etc).(please see the example to understand what is meant by a block)
The current formulae will only display a grade if all cells are complete i.e., A3,H3 & O3.
So I am looking for the formula to:
If A3 has a grade in it I wish V3 to display it because its the only grade. (even if H3 & O3 are blank)
As and when H3 has a grade filled in I want the formula to select the highest and display it in V3 (again even if O3 is blank)
As and when A3, H3 & O3 has a grade in it I wish the formula to lookup and display the highest in V3
Ans this repeated for all different areas, Explore, Plan, Make etc.
example doc with formula.xlsx
The situation is that I have 3 interest income from 3 different companies. Column B acts as a helper column to determine if a partner receives just one interest income or receives multiple interest income. If they receive multiple interest income, I want column B to display a 1 and if not make it blank. If you notice partners 5, 9, and 16 contain two or more interest incomes (Columns C - E). All the cells are have either an amount (positive or negative) or a zero. There are no blank cells. Columns (F - H) contains the interest income amount if only that partner receives just one interest income. So for those partners they should not display any of their amounts. The reason is because I am using a word template and currently have to use multiple templates ( 3 in total) to display correctly for each partner. I got this to work with a word macro that will collapse all non blank columns in a particular table. This might be on a ongoing project for me as I do have more logic to solve.
Excel 2010
A
B
C
[Code]....
Can I have a formula in A1 cell to display the No. of cells in selection (in a range) any where in the sheet. Just the No. in A1 cell is sufficient
View 4 Replies View RelatedI have two cells. The first cell has the formula:
=CONCATENATE("D",TEXT(MATCH($B$6,'Zip Ranges'!$D$1:$D$157,0)+1,"0"))
which results in a col and row number (such as D65).
The second cell has the following formula:
=INDEX('Zip Ranges'!$A:$B,MATCH($B$6,'Zip Ranges'!D1:$D$157,0),2)
^^
I wish to replace the 'D1" in the Match function with the results of the first cell's formula.
I assume Indirect would work, but I don't know how to code the formula to use it.
I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.
View 2 Replies View RelatedI have a s/s which is built on IF functions and references other sheets and I have used the s/s in the past without issue. However now I want to ammend the formula a little and excel will only display the formula itself, not the result of the formula. I have tried CTRL ~ to turn on/off the show formula function but this makes no difference.
My reason for changeing the current formula is that I need to turn a 2 (numeric) to 02 (which can be either numeric or text). This is the new formula.
=IF($A4="","",IF(VLOOKUP($A4,HCGTH1_DATA,22)=2,"02",VLOOKUP($a4,HCGTH1_DATA,22)))
Is there an issue with the formula or some setting in excel?
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedI am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I would like a formula that looks for Y and results Y. See two examples below.
Example
Cell B2 = Y
Cell D2 = N
Cell E2 = Y
Cell F2 = Y
Example
Cell B3 = N
Cell D3 = N
Cell E3 = N
Cell F3 = N
what was the anser to a simple question earlier has now got me thinking...
I have one mega formula (see below) that based on a set of criteria returns a result from a range in an accompanying workbook:
=INDEX('input plus'!D940:D979,MATCH(1,('input plus'!$DJ$940:$DJ$979>=2)*('input plus'!$DG$940:$DG$979=1),0))
(the range 940:979 is a filled with investment funds data all within a particular sector, this formula for example will return the name of the number 1 rated fund, ie "mega star cash")
However, the above assumes that the ranges specified wont change, but they do, frequently and there are over 300 of them, so I earlier got help to create the following formula which can tell me what range a certain set of data lies within:
=CONCATENATE(ADDRESS(MATCH($A$3,'input plus'!$C$1:$C$3000,0)+0,4,4,1),":",ADDRESS(MATCH($A$3,'input plus'!$C$1:$C$3000,1)+0,4,4,1))
(so I tell this formula to look at a specified sector name 'cash funds' and by tweaking the number in bold it will return the range of data that i want to feed into the first formula, ie it will return D940:D979, DJ940:DJ979 and DG940:DG979)
If the data ranges change then these cells will dynamicaly update, either the range will shrink or grow - which is perfect - what i want to know is if i can integrate this into the first formula, so if you like it becomes completely dynamic.
I have created a simple SUM formula to add cell values across six sheets in the same workbook. I see the result when I use the formula button but the result (number) does not appear in the cell. All I get is $ -.
View 9 Replies View RelatedI am using this formula. How can I get it to pull 'Sales Materials'!$F17:$F69' and display along with 'Sales Materials'!$B$17:$B$69 when my logical statement is true.
=INDEX('Sales Materials'!$B$17:$F$69,SMALL(IF('Sales Materials'!$E$17:$E$69="YES",ROW('Sales Materials'!$B$17:$B$69)-16),ROW(A1)),1)
I've tried using * but I think something is going on with "-16" which I was told to you use to account for headers.
I have a spreadsheet which matches Reference numbers in Column A against Column B and vice versa; and assigns unique or duplicate values. I would like to be able to count the number of duplicates and uniques giving a total of how many appear in the spreadsheet. I've attached the spreadsheet to give you an idea of what its like.
View 3 Replies View RelatedHello, I cant figure out how to do this! I have a cell B2 that I enter a number in and in cell C2 I want it to add the number from B2 and add 15 to it. I can get the formula "=B2+15" and it works but I wont always have a number in B2 and I want it to say "0" and "0" would be in C2. Any ideas?
View 3 Replies View RelatedIs I have a VLOOKUP formula which results in a defined name- great! but when I reference that result in another formula I get a #REF error, if I type the defined name directly in to the formula (index btw) all works but I need the formula to recognise the referenced cell.
Example
=VLOOKUP(B8,Cable.Table,2) this results in a defined name of a table (D1A) in cell B30
The cell B30 is named "table". I then have another formula in B33 which is:
=index(B30,B47,C12) or =index(table,B47,C12) Which gives me the #REF error
If I input =index(D1A,B47,C12) the function works but it needs to be the initial reference from the result of the other formula and recognise that it is a defined name.
In A1 I have this: $9.50.
In A2 I want to display the result of multiplying A1 with 10% and subtracting the result from A1.
I've tried this in A2: =SUM(A1*10%)-SUM(A1)
But it displays a negative number: -$8.55
I need it to display: $8.55
The formula in Col G uses the value in col's B:E. I would like a formula in Col G that will use the 4-digit value in Col F ( same values as Col B:E) and return the same results.
******** ******************** ************************************************************************>Microsoft Excel - PLAY 4 EVE MOSTLY.xlsx___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF1G1F2G2F3G3F4G4F5G5F6G6=ABCDEFG111/10/0966666666Q211/09/0977667766DD311/10/0977767776T411/11/0972467246S511/12/0977667766DD611/13/0978667866DSheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Is there any way that I can apply the roundup feature to an entire workbook without having to do each cell individually?