I'd like to write some code to do the following: When the first cell of the row contains an "Y", move the entire row to another sheet (in the same file), keeping in mind that this sheet already contains some rows (so add the row on the first empty row in the sheet). Afterwards the original sheet contains no longer any rows in which the first cell is filled with an "Y".
View 4 RepliesI need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I have an excel file that contains about 1000 rows of data, from column A to O. Column C contains either the letter A or the letter I, A means Active, I means Inactive.
What I'd like to do is replace my monthly manual task of moving all the I's to sheet2. When completed, the excel file should have two sheets, all of the A's on one, and the I's in the other. The original excel file is not sorted by column C. The end result should have the same row 1, being the header row. There are some additional steps, to save the file to a specific location but I think I could do that once the excel file is formatted the way I wanted it.
I have an action tracker which works almost as I want it to. The actions are on the first sheet and once the status column changes to complete then it copies the row to he complete sheet and clears out the action sheet. I have two problems. The first is that I want column 2 to be the entry date but this comes up with an error so I masked out this part of the VBA as below. The second problem is that if I change the state to say "on Going" and then change to complete then it does not copy but if I close down and reopen, it shows complete but when I change to complete again then this time it copies and removes. Is there a way to make it loop so as soon as it says complete then it processes.
I have attached the sample workbook : Actions list_v2.xlsm
[Code] .....
My knowledge of Excel is quite basic, so i had little luck searching for this one.
We have a main data sheet in which everything is inputted, but i would like that data to be split up and reported (copied into) in 2 or 3 other sheets, depending on a single criteria.
Is this able to be done so these 'report' sheet are constantly updated, and the columns in the reports dont include irrelavant columns which are in the main data sheet.
I have a massive data file with thousands of lines of data. Each line is a pair, for example
View 6 Replies View RelatedIs it possible to move rows of data in a spreadsheet to multiple spreadsheet accordingly?
I had lists of tasks in a single spreadsheet and i need to segregate the tasks for all my staff in serial while no duplication among all of them. For instance, i got 4 personals in my department and i need the 1st 4 tasks to be distribute to each of them and next 4 tasks accordingly. This is due to all tasks are equip with due date and i need to calculate how much time i need to accomplishing them. i'm used to manually move it and found it time consuming, so i was wondering if someone would instruct me where or how to achieve it by using a simple macro.
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies View Relatedremoving duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
Is there a way I can compare sheet 1 Column A, with sheet 2 Column A, and then move any duplicates from sheet 2 over to sheet 3.
For instance,
Employee Numbers that match in both sheet 1 and 2, remove that row from sheet 2 to and insert it into sheet 3.
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
I'm trying to create a .cvs file from an exported excel report, but before I can import it to a database I'd like to have one row per record.
I've already omitted out the headers and footers blank spaces and unnecessary columns from the excel file and I needed to just combine multiple rows into one.
It currently looks like this:
ROW#(1), ID#(1), NAME(1)
ADDRESS(1), ZIP(1)
DOB(1), SOURCE(1)
ITEM(1), CITY(1)
ROW#(2), ID#(2), NAME(2)
ADDRESS(2), ZIP(2)
DOB(2), SOURCE(2)
ITEM(2), CITY(2)
and so on..
I'd like to make it like
ROW#(1), ID#(1), NAME(1), ADDRESS(1), ZIP(1), DOB(1), SOURCE(1), ITEM(1), CITY(1)
ROW#(2), ID#(2), NAME(2), ADDRESS(2), ZIP(2), DOB(2), SOURCE(2), ITEM(2), CITY(2)
and so on...
I can't figure out a macro or a way to do this automatically.
I'm essentially getting a lot of data at the moment, which has a few orders people have made on my website.
Essentially, think order id, address etc and then all the products the customer has ordered.
However, the part which includes what the customer has ordered creates multiple rows of data, with the order ids etc duplicated. What I need to do is consolidate this into 1 row. So to add additional columns instead of rows.
The reason fro this is I want to mail merge the data into an invoice and mail merges work of 1 line of data at a time. I've attached an example, any way to do this?
(Attached to this post / or linked here: [URL] ....)
I have a dropdown list with names of different people: Bob, Jane, Joe, et cetera. I also have tabs at the bottom (sheets) for each of these people. Is it possible that when a name is selected from the dropdown box in column D, say Bob, the whole row (row 10 or whatever) is cut from main sheet and put into Bob's sheet, then the row is deleted from main sheet? If this doesn't make sense (because I stink at making sense), just let me know and I will try to clarify
View 14 Replies View RelatedI'll try to be clear on what I need to do and hope I can find a solution.
I've found similar threads but I can not edit them for my use so I had to ask again. What I have is a lot of cows, calfs, heifers.
When a calf turns 12 months old , (ex: =IF(A3>11;move_row(sheet_heifers);"")), I need the entire row move to other sheet (heifers). and when the heifer gives births the first time (ex: column- =IF(A7<>"";move_row((sheet_cows);"" ) the entire row needs to move to other sheet (cows). I can do age calculating and the rest well.
I have a workbook called "Data"
In column "C" I have a part number
In column "F:H" I have a description
5432345 3445rt4 er4445ty ddews6789
4352345 sdwe33 dew345e jjkiii567899
1234566 qwert5 ertyu777 uiopl88888
1234566 eedrf44 yuikj776 ggggt44444
When I have a duplicate part number i want the second description to be populated in rows "I:K"
1234566 eedrf44 yuikj776 ggggt44444 eedrf44 yuikj776 ggggt44444
I have data as follows:
id | name
0 | axe
1 | sword
3 | pencil
4 | fist
5 | hammer
7 | gun
9 | rifle
Is it possible to move the rows to the row# shown in the ID?
- e.g. pencil gets moved from row#2 to row#3
I am trying to move row data into column data. Here is visually what I need.
Before:
After (one row of data only):
We are trying to import data into our accounting software but we can't until we get it into the right format.
I am trying to do work on a sheet and am getting very frustrated. I have a list of several different data entries that contain a row of information. I need to have the excel sheet move these rows to a different sheet in a specified location. For example, in the first column of the data I have the list of commodities, (sugar, cotton, yen, euro, and copper). Then in the second column I have the price and then the quantity. I want to move them automatically from sheet 1 (where they are entered) to a specific location on Sheet 2. I want Cotton to be in A2, Sugar to be in A20, Yen to be in A30, Euro to be in A40 and copper to be in A50. I would like the data to be cut from sheet one and inserted into sheet 2 so that the sheet can move them every day.
View 4 Replies View RelatedI have a workbook with 2 work sheets, when a row has "yes" typed into the "accepted bid" column I would like that row to be placed into the second sheet in the order in which it was entered "yes"
so, if on the first sheet a row, lets say row 10 had "yes" typed into it but row 10-15 on the second sheet had something in it already, the info would have to be placed in the next available row.
I have approximatley 20 rows on the first sheet and the ones that transfer to the second can just be added to it as needed.
I need to know the function to move a named sheet to the end of the list so its the last sheet in the workbook. Worksheets("xxxx").Copy After:=Worksheets(?)
Im copying a worksheet and want to move the new sheet to the end but I dont know how to finnish it. I tried to do.
name3 = Worksheet.count + 2
Worksheets("xxxx").Copy After:=Worksheets(name3)
but I get an error and cant debug it.
I have a sheet with 7 columns and approx 30 rows. I want the information within a particular row to be moved to another sheet if the value of the 7th column is equal to zero.
I have a database that holds client information in columns A through J. I need that data transfered to sheet 2 or 4 depending on what choice is picked from a validatin list I created in column K. The list is either "booked appointment", or "not interested." I would like "booked appointment" data to move to sheet 2, and "not interested" data to move to sheet 4.
View 9 Replies View RelatedI have created a spreadsheet with 4820 rows of data (4821 for computational purposes, the last row being blank) with 5 columns.
1. every third row is blank and it needs to be removed (3, 6, 9,...4818, 4821). Once this is accomplished,
2. I need to move the data that is now found in the even rows, column E moved to the above, current odd row, column F. (ie. E2 to F1, E4 to F3, E6 to F5,...E4808 to F4807...,E4820 to F4819 (however it won't go this high). then
3. I need to delete all the current even rows, as the data I need will be in the odd rows.
I am running through some old accounting documents in excel 2003 (originally from SAP), that contain information in row form that I would like in Column form. Column E indicates to me whether this was an invoiced amount or payment amount or "other." I have limited VBA exposure, but am fairly proficient at what I do know. This is just too difficult for me!
Where the "Assignment" #'s are equal, I need the script/macro to move "up" YP's, YQ's,
See Original Layout.jpg
Then What I'd Like.jpg
Then End Result
I need to move a number of rows, based on user input
in front of the first column, continuously until it 'flattens out' into one row..
And then do the procedure again for the next row
Kinda hard to explain.. maybe i'll use an example
using this matrix :
I have the following spreadsheet with 4 columns of data:
1000001245aMr Fred Blogs
1000001270a1 Blog Street
1000001270bNorwich
1000001270cNorfolk
1000001270eNRx x99
1000001270gThe Manager
1000001270k01603 555 555
1000001270l01603 555 555
1000001270qManager
1000001270xN
1000001270yN
1000002245aMrs Fredilina blogs
1000002270a10 Blog Street
1000002270bNorwich
etc etc for about 36,000 rows.
What I need is for each unigue reference ID (column A),
I need all corresponding data moved up into a single row in serperate columns, something like this:
1000001 |245|a|Mr Fred Blogs| 270|a| 1 Blog Street|270|b| Norwich | 270|b|Norfolk |etc
1000002 |245 |a |Mrs Fredina Blogs |270|a|10 Blog Street |270|b|Norwich| etc
Each entry doesn't nessesarily have the same number of rows.
I would class myself as a beginner VBA bod, but the solution to this one is illuding me a present.
I've been inserting some rows in some sheets and everything is sound... Until I meet a chart! Charts in general are terrain I yet have to explore (and will be coming Monday)...
I insert a row like this: ...
I have a workbook where on one sheet various peoples information is listed and based on their organization the information is then linked to one of a few different worksheets for costs. On the cost worksheets, when a new person is added to the original worksheet, their information populates the next row. At the end of the cost columns I have a the total cost of each person added together. What I need to do is have these totals continue to move down the worksheet as new people are added. Is there a way to do this in excel using VBA or another function?
View 1 Replies View RelatedI have data that is all in column A there are 8 pieces of information.
So client 1 info is listed from A2-A9, client 2 from A10-A17 etc. etc.
I set up A1-H1 to be the headers necessary.
How do I go about moving A2-A9 to A2-H2, then A10-A17 to A3-H3 etc. down through all the contacts which go down to A2400...